• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.58-65
• /
• 2006

Accurate and efficient monitoring of dynamically changing environments is one of the most important requirements for ubiquitous network environments. Ubiquitous computing provides intelligent environments which are aware of spatial conditions and can provide timely and useful information to users or devices. Also, the growth of embedded systems and wireless communication technology has made it possible for sensor network environments to develop on a large scale and at low-cost. In this paper, we present the design and implementation of a monitoring system that collects, analyzes, and controls the status information of each sensor, following sensor data extracted from each sensor node. The monitoring system adopts Web technology for the implementation of a simple but efficient user interface that allows an operator to visualize any of the processes, elements, or related information in a convenient graphic form.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권2호
• /
• pp.136-140
• /
• 2011

Monitoring of water surfaces through permanent measurement of hydrodynamic and meteorological data is one of the main requirements in safe and sustainable water management. The Caspian Sea, the major surface water body in Iran, significantly affects more than 600 km of urban and industrial coastline. In the present work, an integrated marine monitoring network for the entire southern coastline of the Caspian Sea was developed. The main design concerns centered on the network measuring components and data recording, checking, filtering, gap recognition, and transferring systems. Four coastal monitoring stations were assigned, along with two regional collecting stations and one central data station for gathering, checking and delivering recorded data at different access levels. Applicable guidelines on selection of measuring devices for both shallow and deep water zones are presented herein.

• Environmental Engineering Research
• /
• 제17권1호
• /
• pp.47-56
• /
• 2012

A long-term nationwide nonpoint-source pollution monitoring program was initiated by the Ministry of Environment Republic of Korea (ME) in 2007. Monitoring devices including rain gauges, flow meters, and automatic samplers were installed in monitoring sites to collect dynamic runoff data in 2008-2009. More than 10 rainfall events with three or more antecedent dry days were monitored per year. More than 10 samples were collected and analyzed per event. So far, five land use types (single family, apartments, education facilities, power plants, and other public facilities) have been monitored 23 to 24 times each. Characterization of the runoff from different land use types will aid unit load estimation in Korea and hopefully in other countries with similar land use. The monitoring results will be reported regularly at national and international levels.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.187-190
• /
• 2005

High aspect ratio via-hole etching process has emerged as one of the most crucial means to increase component density for ULSI devices. Because of charge accumulation in via-hole, this sophisticated and important process still hold several problems, such as etching stop and loading effects during fabrication of integrated circuits. Indeed, the concern actually depends on accumulated charge. For monitoring accumulated charge during plasma etching process, charge-up monitoring sensor was fabricated and tested under some plasma conditions. This paper presents a neural network-based technique for analyzing and modeling several electrical performance of plasma charge-up monitoring sensor.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2016년도 춘계학술발표대회
• /
• pp.129-132
• /
• 2016

The importance of the infusion pump monitoring system has become amplified in accordance with the growth of IoT(Internet of Things) technology and medical devices. A monitoring system can be described as an essential part of infusion pump system because the patient must be observed all the time. Infusion pump monitoring system is significant to have better safety and efficiency. In this paper, we propose an efficient algorithm and scheme in the infusion monitoring system. In particular, the proposed algorithm based on the time of the database interlocking part was found to have a 30% higher efficiency than the conventional method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.303-306
• /
• 2005

High aspect ration via-hole etching process has emerged as one of the most crucial means to increase component density for ULSI devices. Because of charge accumulation in via hole, this sophisticated and important process still hold several problems, such as etching stop, loading effects during fabrication of integrated circuits. Indeed, the concern actually depends on accumulated charge. For monitoring accumulated charge during plasma etching process, charge-up monitoring sensor was fabricated and tested under some plasma conditions. This paper presents a neural network-based technique for analyzing and modeling several electrical performance of plasma charge-up monitoring sensor.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.20-25
• /
• 2006

We suggest a novel temperature detection method utilized in temperature monitoring system. Suggested method detects temperature variation by using $R_{ds(on)}$ characteristics of MOSFET, while conventional methods are using extra devices such as a temperature sensor or an over-temperature detection transistor. For voltage detection between drain and source, 10 bits resolution ADC is needed. Therefore possible measurement signal range is about ten mV. If detected temperature's voltage exceed protection temperature's voltage then controller generates OT (Over Temperature) signal to stop MOSFET's trigger signal. Whole process of measurement is controlled by software. Experimental results show that the developed temperature monitoring system can provide the suitable temperature monitoring method and difference between detected and data sheet value of the suggested system is about $3\%$.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.36-41
• /
• 2022

In the 21st century, information collection and information provision based on digital informatization and intelligent automation are emerging as one of the social problems in the society for the elderly and the vulnerable groups in the welfare society including the disabled, and various methods are being studied to find realistic alternatives. Among these factors, the problem of the elderly living alone is emerging as the most serious, and as a realistic approach to solve some problems by applying information devices, it is a monitoring system using the Internet of Things(IoT). The need for an optimized system is emerging. In this study, the state of the elderly and the elderly living alone can be measured remotely by applying IoT technology. We present the research cases of a Breathing Sensor-based Smart Monitoring System that is used as a smart information system and used as a monitoring system for the elderly and infirm when it is identified as deceased through state detection

• 조명전기설비학회논문지
• /
• 제25권2호
• /
• pp.96-102
• /
• 2011

There are many problems with the fire detection devices being used in currently, because it is difficult to find location of the source of fire and determine where devices are working or not. In this paper, we proposed fire detection and rescue system using wireless sensor network that can be real-time monitoring and determine safe exit. Fire detection and rescue system based on ubiquitous sensor network can know exactly source of fire and help determine rescue tactics using sensing data from wireless sensor nodes. Transmitted wirelessly in real-time thermal sensor and gas sensor information to analyze the GUI to monitor the status information output to the screen by use of a system implemented in everyday life, looked at the possibility.

• 제어로봇시스템학회논문지
• /
• 제10권4호
• /
• pp.334-340
• /
• 2004

In this paper, a Web-based management system for the building network is described. A multi-protocol converter based on SoC and embedded Linux is designed. The open source licensing, reliability, and broad hardware support are key reasons for use of embedded Linux in embedded industry. The multi-protocol converter integrates control network of RS-485 and LonWorks devices through TCP/IP protocol for a client with Java applet. The system consists of three-tier architecture, such as a client, a server that is performed on a multi-protocol converter, and control devices. The developed system includes the inverter motor control system with modbus protocol for the RS-485 network. The experiment results show that the multi-protocol converter using embedded Linux is a flexible and effective way to builda Web -based monitoring and control system.