• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.53-58
• /
• 2003

This study was carried out to design, construct, and test a greenhouse monitoring system fur the environment and status of control devices in a greenhouse from a remote site using internet. The measuring items selected out of many environmental factors were temperature, humidity, solar radiation, CO$_2$, SOx, NOx concentration, EC, pH of nutrient solution, the state of control devices, and the image of greenhouse. The developed greenhouse monitoring system was composed of the network system and the measuring module. The network system consists of the three kinds of monitors named the Croup Monitor. the Client Monitor and the Server Monitor. The results of the study are summarized as follows. 1. The measuring module named the House Monitor. which is used to watch the state of the control device and the environment of the greenhouse, was developed to a embedded monitoring module using one chip microprocessor 2. For all measuring items. the House Monitor showed a satisfactory accuracy within the range of ${\pm}$0.3%FS. The House Monitors were connected to the Croup Monitor by communication method of RS-485 type and could operate under power and communication fault condition within 10 hours. The Croup Monitor was developed to receive and display measurement data received from the House Monitors and to control the greenhouse environmental devices. 3. The images of the plants inside greenhouse were captured by PC camera and sent to the Group Monitor. The greenhouse manager was able to monitor the growth state of plants inside greenhouse without visiting individual greenhouses. 4. Remote monitoring the greenhouse environment and status of control devices was implemented in a client/server environment. The client monitor of the greenhouse manager at a remote site or other greenhouse manager was able to monitor the greenhouse environment and the state of control devices from the Server Monitor using internet.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.4
• /
• pp.444-449
• /
• 2010

The PID control to the monitor color correction was applied. Converted Gamma LUT was applied to the video card. Color and brightness information from the PID controller was used as control inputs. Color and brightness information from a calibrated monitor is measured again. Then, the difference between the preset values for the PID controller was compensated by the feedback. The software measured by color meter was used for color and brightness information. All of the monitor does not measure the color and brightness was measured by sampling. The color and brightness from the monitor were measured not by complete enumeration but by sampling. In the experiment, the original image was displayed on the same monitor as well as two other brands, and then, Gamma and Contrast were measured and compared.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.59-64
• /
• 2003

This study was carried out to develop database system using internet fur greenhouse. The database system consisted of group monitor, client monitor. server monitor and DBMS. The results of the study are summarized as follows. 1. The monitoring module, as data collection system for database. could monitor the state of the control device and the greenhouse environment. 2 The group monitor was connected to the house monitors by RS-485 communication method. Data received by the group monitor were sent to the server monitor and then stored in database server by TCP/IP and MIDAS. 3. The data of database consisted of on growing environment. control devices, operation and cultivation data in greenhouse. It was developed using MS-SQL server. 4. Remote monitoring of greenhouse was realized in a client/server environment. The client module. which was named as the client monitor. made requests to access the measurement data of greenhouse through the remote data module of the server monitor in internet environment.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.195-213
• /
• 2004

This paper deals with an efficient and effective method on measuring, monitoring and evaluating safety and environmental performances of a process using SPC control charts. We propose 7 safety control charts as a tool to monitor hazard dendritics, and we propose 15 environment control charts to monitor pollution emissions. We also propose useful guidelines that SPC(Statistical Process Control) control charts can be used for safely and environmental monitoring.

• Journal of Advanced Marine Engineering and Technology
• /
• v.25 no.4
• /
• pp.869-879
• /
• 2001

Serial communications such as RS-232C or RS-485 have been used to control and monitor the industrial plants for a long in cooperating with a computer or microprocessor. In recent years a great deal of effort has been made to achieve these control and monitoring through Internet network. This paper proposes a microprocessor system to implement remote control and monitoring system through Internet network. The proposed system uses NE2000 compatible NIC for data link and physical layer to access Internet network The microprocessor employed in the system plays a role of interfacing NE2000 compatible NIC interpreting protocols above link layer, controlling and monitoring industrial plants simultaneously. This paper also shows MMI and experimental results which control and monitor two power plants on the computer monitor with a mouse remotely to verify the proposed.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.507-509
• /
• 1993

The monitor program, which controls overall operation of MC68000 based system and executes some commands and I/O operations, is a system program and consists of functions that executes these operations. Monitor program can be easily applied to design a digital filter. This paper approaches to the object, to which refer above, by considerng algorithm of monitor program, which operates in M68000 based system, and concerning theory. This monitor program operate by the serial communication between host IBM-PC and target MC68000 system with MC6850 and MAX232C.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.248-251
• /
• 1991

A robust monitor AGC(Automatic Gauge Control) system for a hot strip mill plant of POSCO Is designed by minimizing the H.inf. norm of a so called mixed sensitivity function. In order to solve the mininizatlon problem, a polynomial approach proposed by Kwakernaak[5] is used. The controller performance is tested by a computer simulation under various circumstances.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.158-161
• /
• 2017

In this paper, we propose Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine. The proposed system can expand and control Stack Monitor, Area Monitor, and Water(Liquid) Monitor into one system, and can monitor the signals measured by each radiation detector in an integrated manner. The proposed system consists of a sensor module that detects the radiation, a display unit that displays the radiation dose near the radiation detection location, an alarm unit that reports the alarm when the detected radiation dose reaches the danger level, A Main Hub for collecting and storing the contents to the remote monitoring system, and an RMS Monitoring Unit for clearly displaying the measured radiation dose at the remote site. In order to evaluate the performance of Total RMS for the proposed nuclear and nuclear medicine field, it is confirmed that the measurement uncertainty is less than 8.5% and it operates normally within ${\pm}15%$ of the international standard.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.236-241
• /
• 2006

Monitor height is one of the key factors in the VDT workstation design. Most of the previous studies have focused on traditional VDT workplace where the operators performed data entry or word processing tasks using single monitor. This study aimed to suggest proper monitor height when the main task was monitoring information from different number of information sources. Twelve male students participated in three experiments: single information source (one monitor), two information sources (one monitor and one CCTV), and three information sources (one monitor, one CCTV and a window). Subjects performed monitoring tasks for 10 minutes with 3 different monitor center heights : 89.0 cm (Low), 111.3 cm (Middle), and 124.8 cm (High). Surface EMG signals of five neck muscles, subjective discomfort ratings, preference, and working postures were recorded. Results indicated that the middle height was proper for one monitor condition, but the low monitor height was recommended for more than two information sources.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.653-656
• /
• 2003

We have designed embedded web sewer system and ported Linux operating system version 2.4.5 at our system. And then We implemented to control and monitor widely separated hardware and implemented to monitor widely separated image using CMOS image sensor HV7131B. Web server is the Boa web server with General Public License. We designed for this system using of Intel's SA1110 ARM core base processor and connecting input and output device at GPIO port of SA1110. Device driver of General purpose I/O for Embedded Linux OS is designed. And then the application program controlling driver is implemented to use of common gate interface C language. User is available to control and monitor at client PC. This method have benefit to reduce the Expenditure of hardware design and development time against PC base system and have various and capacious application against firmware base system.