• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.604-609
• /
• 2012

Properties of fucoidan used for functional cosmetic ingredients and the effect of fucoidan molecular weight on the cosmetic functions were studied. Fucoidan was extracted from Undaria pinnatifida sporophylls and molecular weight (35~160 kDa) of fucoidan was controlled by contact glow discharge electrolysis (CGDE). To test possibility of fucoidan as a cosmetics material, tyrosinase inhibition property, water-holding property, elastase activity inhibition property and DPPH free radical scavenging property were measured. Water-holding property of fucoidan was higher than that of hyaruronic acid, which is known as the one of the best water-holding material. The water-holding strength of fucoidan slightly increase as molecular weight of fucoidan decrease. Elastase activity inhibition (anti wrinkle effect) of fucoidan was higher than that of adenosine using standard material for anti wrinkle test. Optimum molecular weight of fucoidan to obtain highest tyrosin inhibition effect, elastase inhibition effect and radical scavenger effect is 100 kDa.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.1
• /
• pp.1-13
• /
• 2021

This study was conducted to investigate the effects of the synthesis method, melamine content, and GPC parameters (such as flow rate, column-detector temperature, and sample injection temperature) on the molecular weight of melamine-urea-formaldehyde (MUF) resins. Two different synthesis methods were employed. In the first method, MUF-A resins were synthesized by simultaneously reacting urea, formaldehyde, and melamine (5%, 10%, and 20%) using the reaction of alkaline-acid-alkaline steps under controlled temperature and viscosity. In the second method, MUF-B resins were synthesized by first reacting melamine at the same levels with formaldehyde and then by adding urea. The highest weight average molecular weight (Mw) of MUF-A resins was found at 10% melamine content when the flow rate was 0.3 and 0.8 ml/min; Mw decreased slightly at 20% melamine content. The results showed that Mw increased with an increase in the melamine content when the flow rate was 0.5 and 1.0 ml/min. In addition, Mw was the highest when the flow rate, column-detector temperature, and injection temperature were 0.3 ml/min, 50℃, and 25℃, respectively. On the contrary, MUF-B resins had greater Mw and number average molecular weight (Mn) than MUF-A resins. Overall, Mw and Mn increased as the melamine content increased. The optimal GPC parameter for MUF resins was determined as follows: a flow rate of 0.5 ml/min, a column-detector temperature of 50℃, and a sample injection temperature of 50℃.

• The Korean Journal of Zoology
• /
• v.26 no.4
• /
• pp.235-251
• /
• 1983

Several approaches have been made to access the mechanism of fusion in chick myoblast in vitro. Lactoperoxidase-catalyzed iodination was applied to labell cell surface proteins during myogenesis. Quantitative as well as qualitative changes were observed in $^131$I surface components of prefusion and postfusion cells. Two proteins with a molecular weight of 165K and 93K daltons were observed to appear at the onset of fusion as compared to prefusion stage. At the same time, 245K dalton protein decreased whereas the low molecular weight proteins increased consistently. The decrease of high molecular weight proteins appears to be associated with the cell cycle of myoblast during differentiation. The increased appearance of low molecular weight proteins might be due to the proteolytic cleavage of the high molecular weight proteins. Examination of intracellulr cAMP levels during fusion has revealed that a large but transient increase in cAMP occurs before the onset of fusion. This result suggests a causal relationship between the increase of cAMP and the onset of fusion, and further, that differentiating myoblasts are synthronized to a high degree. During the course of myoblast differentiation, at least four lowe molecular weight proteins, which different from major surface proteins iodinated, were identifiable in the culture medium. These proteins could be ascribed to be released from the membrane by proteolytic cleavage of surface proteins in the course of myoblast fusion. The significance of cell surface alterations and the released proteins during the fusion, the involvement of cAMP in the onset of fusion and the possibility that fusion is promoted by external factor(s) are discussed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.12
• /
• pp.1647-1656
• /
• 1998

The drag reduction is the phenomenon that occurs only when the shear stress from the wall of pipe is beyond the critical point. The drag reduction increase as the molecular weight, concentration of the polymer and Reynolds number increase, but it is limited by Virk's maximum drag reduction asymptote. Because of the strong shear force for the polymer on the turbulent flow, the molecular weight and the drag reduction do not decrease. Such mechanical degradation of the polymer occurs in all polymer solvent systems. This paper is to identify and develop high performance polymer additives for fluid transportations with the benefits of turbulent drag reduction. In addition, drag reduction in vertical flow by measuring the pressure drop and local void fraction on vertical-up flow of close system is evaluated.

• Preventive Nutrition and Food Science
• /
• v.13 no.4
• /
• pp.354-361
• /
• 2008

A novel bacterium isolated from Cheonggukjang was identified as a glutamate-dependent Bacillus subtilis HA with 98.3% similarity to Bacillus subtilis Z99104. Optimization of poly-$\gamma$-glutamic acid ($\gamma$-PGA) production by modulating fermentation factors including carbon sources, nitrogen sources, inorganic salts and fermentation time was investigated. Optimum culture broth for $\gamma$-PGA production consisted of 3% glutamate, 3% glucose and various salts, resulting in the PGA production of 22.5 g/L by shaking culture for 72 hr at $37^{\circ}C$. Average molecular weight of $\gamma$-PGA was determined to be 1,220 kDa through MALLS analysis. The $\gamma$-PGA solution showed a typical pseudoplastic flow behavior, and a great decrease in consistency below pH 6.0 regardless of the same molecular weight of $\gamma$-PGA. The molecular weights of isolated $\gamma$-PGA were drastically decreased by heat treatment in various acidic conditions, resulting in different hydrolysis of $\gamma$-PGA. The consistency of $\gamma$-PGA solution was greatly decreased with increase heating time in acidic conditions.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.122-128
• /
• 2010

We measured shear viscosity of copoly(styrene(St)/butyl methacrylate(BMA)) (co-PSB) particles, with a capillary rheometer at $170^{\circ}C$, prepared by suspension polymerization with hydrophobic silica as a stabilizer. co-PSB particles with the weight average molecular weights of lower than 74,800 g/mol displayed a Newtonian behavior at low shear rates. With the weight average molecular weight exceeding 136,800 g/mol, co-PSB particles showed shear thinning against shear rates and the absolute value of the slopes between shear viscosity vs. shear rate increased. When the ratio between St and BMA changed from 7/3 to 5/5 to 3/7, shear viscosity and glass transition decreased despite similar molecular weights. When the ratio was 1/9, it showed a large increase in initial shear viscosity despite reduced glass transition. Shear viscosity exhibited an increase in proportion to carbon black concentration. The effect of carbon black concentration on the shear viscosity of co-PSB composites was less pronounced compared to varying molecular weights and/or compositional ratio.

• Applied Chemistry for Engineering
• /
• v.10 no.5
• /
• pp.761-766
• /
• 1999

In this paper, high pressure phase behavior in the binary polyethylene/butane and polyethylene/dimethyl ether has been studied. The pressure-temperature diagrams in polyethylene/butane were shown by increasing concentration for molecular weight standards, that is, $M_w=700,\;1000$ and 2000. It is found that the temperature and the pressures go up with increasing in concentrations for each molecular weight, but the latter lower in concentrations over 16 wt % polyethylene. In addition, the phase behaviors for each molecular weights with about 5 wt % polyethylene are shown in pressure-temperature, and pressures increase with increasing in molecular weight($M_w=700,\;1000$, and 2000). The phase behaviors in polyethylene/dimethyl ether are determined according to its molecular weight, and are shown for a range of pressures of 40~280 bar and temperatures of about $120{\sim}220^{\circ}C$. It is shown that in pressure-temperature of polyethylene/dimethyl ether the pressure increases with increasing in polyethylene molecular weight, and the difference in pressure for each molecular weight shows by about 60 bar. The gap in pressure between polyethylene/butane and polyethylene/dimethyl ether system with 5 wt % polyethylene for each molecular weight standards indicates about 25(700), 90(1000), and 100 bar(2000), respectively.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.322-322
• /
• 2006

Well-defined poly(N-vinylcarbazole), poly(NVC), was synthesized by macromolecular design via interchange of the xanthate (MADIX)/reversible addition-fragmentation chain transfer (RAFT) polymerization in the presence of a suitable xanthate-type chain transfer agent (CTA). Good control of the polymerization was confirmed by the linear first-order kinetic plot, the molecular weight controlled by the monomer/CTA molar ratio, linear increase in the molecular weight with the conversion, and the ability to extend the chains by the second addition of the monomer. Star polymers having various architectures were also synthesized using this technique.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.9 no.1
• /
• pp.29-33
• /
• 2004

Low molecular weight silk fibroin (LMSF), which was prepared by hydrolysis of silk fibroin using high-temperature and high-pressure method, was found to inhibit the oxidation of L-3,4,-dihydroxyphenylalanine (L-DOPA) catalyzed by mushroom tyrosinase (EC 1.14.18.1). LMSF contained mostly free amino acids such as L-glycine, L-alanine, and L-serine and oligopeptides, mainly glycine-alanine dimer. As a result of analyzing the inhibition kinetics from Lineweaver-Burk plots, L-glycine and glycine-alanine dimer showed noncompetitive behavior while uncompetitive behavior was observed in L-alanine, and L-serine. When weight percent concentration of ${ID_50}$ was compared, L-glycine was most effective on the inhibition and LMSF was also good enough for the inhibition effect of tyrosinase activity. LMSF showed a mixed-type inhibition and the inhibitory mechanism of LMSF might be caused by free amino acids and oligopeptides. As a result of spectroscopic observation with time, initial rate of increase of DOPAchrome decreased remarkably and the time to reach maximum absorbance increased as an increase of the concentration of L-glycine, meaning that L-glycine made itself mainly responsible for the formation of chelate with ${Cu^2+}$ in tyrosinase. However, in case of L-alanine, L-serine, and especially glycine-alanine dimmer, the production of DOPAchrome after an arrival at maximum absorbance decreased, indicating the production of adducts through the reaction with DOPAquinone.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1361-1370
• /
• 2015

A blue laccase was purified from a white rot fungus of Trametes trogii, which was a monomeric protein of 64 kDa as determined by SDS-PAGE. The enzyme acted optimally at a pH of 2.2 to 4.5 and a temperature of 70℃ and showed high thermal stability, with a half-life of 1.6 h at 60℃. A broad range of substrates, including the non-phenolic azo dye methyl red, was oxidized by the laccase, and the laccase exhibited high affinity towards ABTS and syringaldazine. Moreover, the laccase was fairly metal-tolerant. A high-molecular-weight kraft lignin was effectively polymerized by the laccase, with a maximum of 6.4-fold increase in weight-average molecular weight, as demonstrated by gel permeation chromatography. Notable structural changes in the polymerized lignin were detected by Fourier transform infrared spectroscopy and ¹H NMR spectroscopy. This revealed an increase in condensed structures as well as carbonyl and aliphatic hydroxyl groups. Simultaneously, phenolic hydroxyl and methoxy groups decreased. These results suggested the potential use of the laccase in lignin modification.