• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1640-1645
• /
• 2004

The pumping characteristics of a single-stage disk-type drag pump ( DTDP ) are calculated,for the variation of the vertical clearance between a rotor and stator and of the radial clearance between a rotor and casing wall, by the three-dimensional direct simulation Monte Carlo (DSMC)method. The gas flow mainly belongs to the molecular transition flow region. Spiral channels of a DTDP are cut on the both the upper and lower sides of a rotating disk, but the stationary disks are planar. As a consequence of results, the vertical and radial clearances have a significant effect on the pumping performance. Experiments are performed under the outlet pressure range of 0.4 $^{\sim}$ 533 Pa. When the numerical results are compared to the experimental data, the numerical results agree well qualitatively.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.435-440
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN) -itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or Intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to relation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• Textile Coloration and Finishing
• /
• v.13 no.6
• /
• pp.77-77
• /
• 2001

This study investigates the rheological properties of in-situ polymerized solutions of polyacrylonitrile(PAN) and acrylonitrile(AN)-itaconic acid(IA) in dimethyl sulfoxide(DMSO) in terms of temperature, concentration, and time. The complex viscosity and storage modulus of the solutions were generally increased with elapsing time, which is ascribable to the three-dimensional pseudostructures formed by strong inter- or intra-molecular attractions through Polar -CN and -COOH groups. The three-dimensional pseudonetworks would lead to gelation of the acrylic solutions in long term. This was more noticeable at higher temperature within the temperature range examined. In the case of 20% solutions one can not observe lower Newtonian flow region in the viscosity curve. Disappearance of lower Newtonian flow region is indicative of heterogeneity of the solution system. Casson Plot of the viscosity data revealed that 20% solutions of PAN and AN-IA copolymer in DMSO clearly demonstrated positive yield stress, ascertaining formation of pseudostructures in the solution systems.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1501-1510
• /
• 2004

The pumping characteristics of a single-stage disk-type drag pump (DTDP) are calculated for the variation of the vertical clearance between a rotor and stator by the three-dimensional direct simulation Monte Carlo (DSMC) method. The gas flow mainly belongs to the molecular transition flow region. Spiral channels of a DTDP are cut on the both the upper and lower sides of a rotating disk, but a stationary disk is planar. The interaction between molecules is described by the variable hard-sphere model. The no time counter method is used as a collision sampling technique. The vertical clearance has a significant effect on the pumping performance. Experiments are performed under the outlet pressure range of 0.4∼533 Pa. When the numerical results are compared with the experimental data, the numerical results agree well quantitatively

• Food Science and Biotechnology
• /
• v.15 no.1
• /
• pp.33-38
• /
• 2006

This study was performed to provide basic rheological data of dandelion root concentrates in order to predict their processing aptitude and usefulness as functional foods material. The hot water and 70% ethanol extracts of dandelion root were concentrated at 5, 20, and 50 Brix, and their static viscosity, dynamic viscosity, and Arrhenius plots were investigated. Almost all hot water concentrates showed the typical flow properties of a pseudoplastic fluid, but evaluation using the power law model indicated that the 70% ethanol concentrates showed a flow behavior close to a Newtonian fluid. The apparent viscosity of hot water and 70% ethanol concentrates decreased with increasing temperature. Yield stresses of hot water and 70% ethanol concentrates by Herschel-Bulkley model application were in the range of 0.026 - 1.368 Pa and 0.022 - 0.238 Pa, respectively. The effect of temperature and concentration on the apparent viscosity was examined by Arrhenius equation. The activation energies of hot water and 70% ethanol concentrates were in the range of $8.762-23.778{\times}10^3\;J/mol{\cdot}kg$ and $3.217-20.384{\times}10^3\;J/mol{\cdot}kg$ with increasing concentration, respectively. Storage (G') and loss (G") moduli were generally increased with increasing frequency. For the 70% ethanol concentrates, G" predominated over G' at all applied frequencies and so they showed the typical flow behavior of a low molecular solution. However, for the hot water concentrates, G' predominated over G" at more than 1.9 rad/sec (cross-over point) and so they showed the typical flow behavior of a macromolecular solution.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.27-34
• /
• 2006

Knudsen number is the ratio of molecular mean free path versus mm thickness and the criterion to determine the flow form. When its value is lower than 0.01, the flow can be assumed to has no slip boundary condition. And in the case that the value is between 0.01 and 10, then the flow has slip boundary condition at both the adjacent walls. The condition of the air flow between the rotating journal and top foil in the air foil bearing is determined by the rotating speed and load, and the Knudsen number is also varied by those values. Because the molecular mean free path is variable to the pressure and temperature, more exact formulation is necessary to understand and analyze the flow regime. In this study, the analysis considering Knudsen number formulated with those variables (pressure, temperature and mm thickness) was executed. The approximate value was examined using the equation to confirm whether the flow has the slip or no-slip boundary condition. From the analytic investigation, it was decided to range approximately 0.01 to 1.0 and the flow can be supposed to have the slip boundary condition. Under the condition of the slip flow, the static characteristics of the air foil bearing were examined using modified Reynolds equations. The results were compared with those considering no slip condition. It shows that the slip condition makes the flow decelerates and the load carrying capacity decreases compared with no slip condition. And as the bearing number and eccentricity ratio increase, the load carrying capacity also increased at both the cases. From this result, it can be supposed that the bearing torque also increases. In the analysis of the dynamic characteristics, the perturbed Knudsen number was taken into consideration. Because the Knudsen number is expressed as the terms of each variable, the perturbed equation can be simply derived. The results of both cases considering and not considering Knudsen number were compared each other. In the case of the direct terms of the stiffness and damping coefficients, the difference between both cases was little and increased as the bearing number and eccentricity ratio increased. And the cross terms have less or more differences.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.791-794
• /
• 2005

A visible photochemistry of maleic to fumaric acid adsorbed on silver nanoparticle surfaces was investigated as probed by SERS using a simple flow method. Photoisomerization of maleic to fumaric acid was consecutively observed in the condition of various flow rates, which varied the exposure time of laser beam. The sequential SERS spectra of maleic acid indicated that the photochemical isomerization and desorption took place simultaneously on silver nanoparticle surfaces as a function of laser fluency and wavelength. For 530.9nm laser line excitation, the rate constant coefficients were obtained with a = 5.9 $sec^{-1}$ mW for isomerization and b = 13.9 $sec^{-1}$ mW for desorption, which $k_1\;=\;aI^n\;and\;k_2\;=\;bI^m$. Both reactions were one photon process (n = 1, m = 1) of a visible light and relatively fast process whose decay time was in the range of milli-second for 50 mW laser power. The rate of photochemical reaction increased on going toward the blue and photodesorption was a dominant process. A simple flow method used in this study was very useful to study a relatively fast photochemical reaction of molecules adsorbed on silver nanoparticle surfaces.

• BMB Reports
• /
• v.29 no.2
• /
• pp.127-132
• /
• 1996

Germinal centers (GCs) are formed in peripheral lymphoid tissues in response to protein antigens. In order to see if immunoglobulin isotype switching takes place in GC B-cells, we isolated GC B-cells (PNA positive cells) from mouse popliteal lymph nodes by a flow cytometer after the staining of lymph node cells with PNA-FITC and anti-B220-PE, and determined the expression of ${\gamma}1$ germline transcript and ${\gamma}1$ mRNA by RT-PCR. ${\gamma}1$ germline transcript and ${\gamma}1$ mRNA were amplified specifically in cDNAs from hybridoma expressing IgG1 or splenocytes stimulated LPS plus IL-4. Germinal center B-cells formed in popliteal lymph nodes of mice immunized with chicken ovalbumin were isolated 7 days after immunization. We sorted GC B-cells five times. Immunoglobulin ${\gamma}1$ germline transcripts were expressed in germinal center B-cells in three out of five sorts whereas two out of five sorts did not express ${\gamma}1$ germline transcripts in GC B-cells. The contents of GC B-cells ranged from 5 to 7% of total lymph node cells in most flow cytometric analyses but those of two sorted cells which did not express ${\gamma}1$ germline transcripts were out of normal range. These results imply that isotype switching of immunoglobulins may take place in GCs.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.109-116
• /
• 2008

The effect of intermolecular aggregation induced by hydrophobic and electrostatic interactions on shear and elongational flow properties of aqueous acrylic thickener solutions is discussed. Complex shear modulus is determined at frequencies up to $10^4$ rad/s employing oscillatory squeeze flow. Extensional flow behavior is characterized using Capillary Break-up Extensional Rheometry. Aqueous solutions of poly(acrylic acid)(PAA)/poly(vinylpyrrolidone-co-vinylimidazole) (PVP-VI) mixtures exhibit unusual rheological properties described here for the first time. Zero-shear viscosity of the mixtures increases with decreasing pH and can exceed that of the pure polymers in solution by more than two orders of magnitude. This is attributed to the formation of complexes induced by electrostatic interactions in the pH range, where both polymers are oppositely charged. PAA/PVP-VI mixtures are compared to the commercial thickener Sterocoll FD (BASF SE), which is a statistical co-polymer including (meth) acrylic acid and ethylacrylate (EA) forming aggregates in solution due to "sticky" contacts among hydrophobic EA-sequences. PAA/PVP-VI complexes are less compact and more deformable than the hydrophobic Sterocoll FD aggregates. Solutions of PAA/PVP-VI exhibit a higher zero-shear viscosity even at lower molecular weight of the aggregates, but are strongly shear-thinning in contrast to the weakly shear-thinning solutions of Sterocoll FD. The higher ratio of characteristic relaxation times in shear and elongation determined for PAA/PVP-VI compared to Sterocoll FD solutions reflects, that the charge-induced complexes provide a much stronger resistance to extensional flow than the aggregates formed by hydrophobic interactions. This is most likely due to a break-up of the latter in extensional flow, while there is no evidence for a break-up of complexes for PAA/PVP-VI mixtures. These flexible aggregates are more suitable for the stabilization of thin filaments in extensional flows.

• Analytical Science and Technology
• /
• v.32 no.5
• /
• pp.173-184
• /
• 2019

As the size of semiconductors becomes smaller, it is necessary to perform high precision polishing of nanoscale. Ceria, which is generally used as an abrasive, is widely used because of its uniform quality, but its stability is not high because it has a high molecular weight and causes agglomeration and rapid precipitation. Such agglomeration and precipitation causes scratches in the polishing process. Therefore, it is important to accurately analyze the size distribution of ceria particles. In this study, a study was conducted to select dispersants useful for preventing coagulation and sedimentation of ceria. First, a dispersant was synthesized and a ceria slurry was prepared. The defoamer selection experiment was performed in order to remove the air bubbles which may occur in the production of ceria slurry. Dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) were used to determine the size distribution of ceria particles in the slurry. AsFlFFF is a technique for separating nanoparticles based on sequential elution of samples as in chromatography, and is a useful technique for determining the particle size distribution of nanoparticle samples. AsFlFFF was able to confirm the presence of a little quantities of large particles in the vicinity of 300 nm, which DLS can not detect, besides the main distribution in the range of 60-80 nm. AsFlFFF showed better accuracy and precision than DLS for particle size analysis of a little quantities of large particles such as ceria slurry treated in this study.