• Journal of Korean Society on Water Environment
• /
• v.38 no.3
• /
• pp.133-142
• /
• 2022

Natural organic matter (NOM) is a heterogeneous mixture of organic matter with various polarities and molecular weights in an aquatic environment. This study investigated the effects of separation conditions (resin volume, organic matter, etc.) and the repeated use of the resin for the fractionation of organic components in the DAX resin fractionation method. The distribution characteristics of the organic components ((hydrophilic [Hi], hydrophobic acid [HoA], and hydrophobic neutral [HoN]) under the derived fractionation conditions were also analyzed. Constant fractionation results (i.e. HoA/Hi ratio) were obtained in the column capacity factor (i.e. the packed resin volume) in the range of 50 to 100. The resin-packed column maintained constant separation efficiency for up to two repeated uses. The above conditions were applied to wastewater and stream water samples (before and after rainfall). The results showed that the concentration of organic matter in the wastewater effluent was 2-15 times lower with an increased ratio of hydrophilicity to hydrophobicity (i.e. Ho/Hi) compared to the influent depending on the industrial wastewater classification. Particularly, HoN was found to have a high content distribution, 10.2-50.4% of the total dissolved organic matter (DOM), in the effluents. For the stream water, the content of Hi or HoN increased significantly after rainfall, suggesting a correlation with the distribution characteristics of pollutants from the stream watershed. The results provide useful data to enhance the reliability of the DAX resin fractionation and its application to environmental samples.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.2
• /
• pp.164-172
• /
• 2001

The angiotensin-I converting enzyme (ACE) inhibitors from laver hydrolysate was isolated. Among the 13 kinds of proteases, Maxazyme NNP was most effective for preparing the high ACE inhibitory compound. In extraction conditions of ACE inhibitory peptide from laver hydrolysate, ACE inhibitory activity of hydrolysate treated with diethylether for decolorization and that of $70\%$ ethanol soluble fraction among the different ethanol concentrations were higher than other preparations. Low molecular fraction less than 3,000 dalton of layer hydrolysate separated by ultrafiltration had the highest ACE inhibitory activity, for further separation of ACE inhibitory peptide from laver hydrolysate, gel filtration chromatography (Sephadex G-25), reverse-phase HPLC (ODS & Vydac C-18) and gel permeation chromatography (Superdex Peptide HR) were performed. The molecular mass of the ACE inhibitory peptide fractions of gel permeation chromatography determined by electrospray-mass spectrometer were 413.48 (S1O2V2V1P),346.86 (S1O2V2V2P) and 320.32 (S2O6V3V1P) dalton and their amino acid sequence were Val-Gln-Gly-Asn, Thr-Glu-Thr and Phe-Arg, respectively.

• Korean Chemical Engineering Research
• /
• v.45 no.5
• /
• pp.487-492
• /
• 2007

Using the selective host-guest inclusion of $G_2$[naphthalene disulfonate], the structural isomers of 1,2-dibromobenzene and 1,3-dibromobenzene were separated. As such, 1,3-dibromobenzene was selectively included as guest into the host framework in mixture isomers over 30% fraction of 1,3- dibromobenzene ($X_{1,3-DBB}=0.3$) whereas 1,2-dibromobenzene as guest was selective to the inclusion below $X_{1,3-DBB}=0.3$. This was due to the selectivity of host framework toward the guest molecules playing a role of template to the host framework. From the powder pattern XRD of inclusion compounds crystallized in pure isomer and mixture solutions, the template roles of guest molecules to the host framework were confirmed. Using the DSC, it was found that the more energy was required to release 1,3-dibromobenzene of guest from the host framework than 1,2-dibromobenzene due to the higher thermal stability. The thermal stability of the $G_2NDS$-1,3-dibromobenzene inclusion compound was consistent with the high selectivity of 1,3- dibromobenzene to the host framework in broad range of fraction in the isomer mixture

• Clean Technology
• /
• v.17 no.4
• /
• pp.389-394
• /
• 2011

A compact adsorption-based process for removal of carbon dioxide and nitrogen from natural gas has been discussed. Among the adsorption-based processes, especially, the pressure swing adsorption (PSA) process has been a suitable unit operation for the purification and separation of gas because of low operation energy and cost. A step cycle is made up of pressurization, feed, equalization, blowdown and rinse. In this work, the PSA process is composed of zeolite 13X and carbon molecular sieve (CMS) for removal of carbon dioxide and nitrogen from mixed gas containing $CH_4/CO_2/N_2$ (75:21:4 vol%). A CMS selectively removes carbon dioxide and a zeolite 13X separates nitrogen from methane. CMS is investigated experimentally due to the high throughput of the faster diffusing component ($CO_2$). The gas composition of top, bottom and feed tank was measured with the gas chromatography (GC) using TCD detector, helium as carrier gas and packed column for analysis of methane, carbon dioxide, and nitrogen.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.143-150
• /
• 2021

The recent spread of novel and highly variant pathogenic viruses, including the coronavirus (SARS-CoV-2), has increased the demand for diagnostic testing for rapid confirmation. This has resulted in investigating the functional capability of each space, and preparing facility guidelines to secure the safety of medical technologists. During viral evaluations, there is a requirement of negative pressure facilities along with thread separation, during pre-treatment of samples and before nucleic acid amplification. Space composition therefore needs to be planned by considering unidirectional air flow. This classification of safety management facilities is designated as biosafety level 2, and personal protective equipment is placed accordingly. In case of handling dangerous materials, they need to be carried out of the biosafety cabinet, and sterilizers are required for suitable disposal of infectious agents. A common feature of domestic laboratories is maintenance of the sample pre-treatment space at a negative pressure of -2.5 Pa or less, and arranging separate pre-treatment and reagent preparation spaces during the test process. We believe that the data generated in this study is meaningful, and offers an efficient direction and detailed flow for separation of the inspection process and space functions. Moreover, this study introduces construction of the laboratory by applying the safety management standards.

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.119-125
• /
• 2021

⁸²Sr for ⁸²Rb generator was produced through the irradiation of the proton beam on the ^nat.RbCI target at the target irradiation facility installed at the end of the Rl-dedicated beamline of the 100 MeV proton linear accelerator of KOMAC (Korea Multi-purpose Accelerator Complex). The average current of the proton beam was 1.2 µA for irradiation time of 150 min. For the separation and purification of the ⁸²Sr from ^nat.RbCI irradiated, Chelex-100 resin was used. The activities of ⁸²Sr in the irradiated ^nat.RbCI target solution and after purification were 45.29 µCi and 43.4 µCi, respectively. The separation and purification yield was 95.8%. As an adsorbent to be filled in the generator for ⁸²Sr adsorption hydrous tin oxide was selected. The adsorption yield of ⁸²Sr into the generator adsorbent was > 99 %, and the total amount of ⁸²Sr adsorbed to the generator was 21.6 µCi as of the day of the ⁸²Rb elution experiment. When the elution amount was 22 mL, the maximum⁸²Rb elution yield was 93.3%, and the elution yield increased as the flow rate increased. After the eluted ⁸²Rb was filled in the correction phantom of the small PET for animals, a PET image was taken. The image scan time was set to 5 min, and the phantom PET image was successfully obtained. As results of impurity analysis on eluted ⁸²Rb using ICP-MS, ^nat.Rb stable isotopes that compete in vivo of ⁸²Rb were identified as undetected levels and were determined to be No-Carrier-Added (NCA).

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.483-488
• /
• 1998

We previously found that a potent gonadotropin-releasing hormone (GnRH) agonist, buserelin, decreases GnRH promoter activity together with GnRH mRNA level, providing evidence for an autoregulatory mechanism operating at the level of GnRH gene transcription in immortalized GT1-1 neuronal cells. To examine whether agonist-induced decrease in GnRH mRNA level requires the continuous presence of buserelin, we performed a pulse-chase experiment of buserelin treatment. Short-term exposure (15 min) of GT1-1 neuronal cells to buserelin ($10{\mu}M$) was able to decrease GnRH mRNA levels when determined 24 h later. When GT1-1 cells were treated with buserelin ( $10{\mu}M$) for 30 min and then incubated for 1, 3, 6, 12, 24, and 48 h after buserelin removal, a significant decrease in GnRH mRNA levels was observed after the 12 h incubation period. These data indicate that inhibitory signaling upon buserelin treatment may occur rapidly, but requires a long time (at least 12 h) to significantly decrease the GnRH mRNA level. To examine the possible involvement of de novo synthesis and/or mRNA stability in buserelin-induced decrease in GnRH gene expression, actinomycin D ($5{\mu}m/ml$), a potent RNA synthesis blocker, was co-treated with buserelin. Actinomycin D alone failed to alter basal GnRH mRNA Revel, but blocked the buserelin-induced decrease in GnRH mRNA level at 12 h of post-treatment. These data suggest that buserelin may exert its inhibitory action by altering the stability of GnRH mRNA. Moreover, a polvsomal RNA separation by sucrose gradient centrifugation demonstrated that buserelin decreased the translational efficiency of the transcribed GnRH mRNA. Taken together, these results clearly indicate that GnRH agonist buserelin acts as an inhibitory signal at multiple levels such as transcription mRNA stability, and translation.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.285-290
• /
• 2023

Poly-lactic acid (PLA) is the most promising polymer in additive manufacturing as an alternative to acrylonitrile butadiene styrene (ABS). Since it is produced from renewable resources such as corn starch and sugar beets, it is also biocompatible and biodegradable. However, PLA has a couple of issues that limit its use. First, it has a comparatively low glass transition temperature of around 60 ℃, such that it exhibits low thermal resistance. Second, PLA has low impact strength because it is brittle. Due to these problems, scientists have found methods to improve the crystallinity and ductility of PLA. Polyethylene glycol (PEG) is one of the most studied plasticizers for PLA to give it chain mobility. However, the blend of PLA and PEG becomes unstable, and phase separation occurs even at room temperature as PEG is self-crystallized. Thus, it is necessary to investigate the optimal mixing ratio of PLA-PEG at the molecular scale. In this study, molecular dynamics will be conducted with various ratios of L-type PLA (PLLA) or DL-type PLA-PEG (PDLA-PEG) systems by using BIOVIA Materials Studio.

• BMB Reports
• /
• v.42 no.12
• /
• pp.840-845
• /
• 2009

Mitogen- and stress-activated protein kinase (MSK1) palys a crucial role in the regulation of transcription downstream of extracellular-signal-regulated kinase1/2 (ERK1/2) and mitogen-activated protein kinase p38. MSK1 can be phosphorylated and activated in cells by both ERK1/2 and p38$\alpha$. In this study, Casein Kinase 2 (CK2) was identified as a binding and regulatory partner for MSK1. Using the yeast two-hybrid system, MSK1 was found to interact with the CK2$\beta$ regulatory subunit of CK2. Interactions between MSK1 and the CK2$\alpha$ catalytic subunit and CK2$\beta$ subunit were demonstrated in vitro and in vivo. We further found that CK2$\alpha$ can only interact with the C-terminal kinase domain of MSK1. Using site-directed mutagenesis assay and mass spectrometry, we identified five sites in the MSK1 C-terminus that could be phosphorylated by CK2 in vitro: Ser757, Ser758, Ser759, Ser760 and Thr793. Of these, Ser757, Ser759, Ser760 and Thr793 were previously unknown.

• Membrane Journal
• /
• v.28 no.4
• /
• pp.221-232
• /
• 2018

The silica containing carbon ($C-SiO_2$) membranes were fabricated using poly(imide siloxane)(Si-PI) and polyvinylpyrrolidone (PVP) blended polymer. The characteristics of porous carbon structures prepared by the pyrolysis of polymer blends were related with the micro-phase separation behaviors of the two polymers. The glass transition temperatures ($T_g$) of the mixed polymer blends of Si-PI and PVP were observed with a single $T_g$ using differential scanning calorimetry. Furthermore, the nitrogen adsorption isotherms of the $C-SiO_2$ membranes were investigated to define the characteristics of porous carbon structures. The $C-SiO_2$ membranes derived from Si-PI/PVP showed the type IV isotherm and possessed the hysteresis loop, which was associated with the mesoporous carbon structures. For the molecular sieving probe, the $C-SiO_2$ membranes were prepared with the ratio of Si-PI/PVP and the pyrolysis conditions, such as the pyrolysis temperature and the isothermal times. Consequently, the $C-SiO_2$ membranes prepared by the pyrolysis of Si-PI/PVP at $550^{\circ}C$ with the isothermal time of 120 min showed the $O_2$ permeability of 820 Barrer ($1{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$) and $O_2/N_2$ selectivity of 14.