• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.456-470
• /
• 2013

Hollow-fiber membranes, is one of the new technologies that is growing rapidly in the past few decades. In addition, separation membranes using polymer materials, have attracted attentions in various fields including gas separation, fuel cells, water treatment, wastewater treatment, and organic separation. Nanofiltration (NF) membranes having the separation characteristics in the intermediate range between ultrafiltration and reverse osmosis (RO) membranes for liquid separation, with relatively low investment cost and operating pressure lower than that of RO membranes, have high permeance and rejection performance of multivalent ions as well as organic compounds of molecular weight between $200{\sim}1000gmol^{-1}$. In this paper, we would like to review the research trends on the various structure control and characterization of NF hollow fiber membranes with respect to materials and the methods of preparation (phase inversion method and interfacial polymerization method). Currently, most of NF membranes have been manufactured by plate and frame types or spiral wound types. But hollow fiber types have delayed in commercial products, because of the weak strength when to produce on the basis of the existing materials, therefore the development of new materials or improvement of existing materials will be needed. If improving manufacturing technology is available, hollow fiber types will replace spiral wound types and gradually show a higher market share.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.90-98
• /
• 2008

Nanotechnology(NT) refers to a field of advanced micro-technology covering the creation and manufacturing of materials on the atomic and molecular scale and requires interdisciplinary study with various fields including materials science, physics, chemistry, electronics and others. Whileas nanotechnology is a kind of micro and small scaled science, space technology(ST) is one of the larger and system technologies utilizing broad fields of mechanical, materials, electronics and communication technologies. It is necessary to select and concentrate the functional items of nanotechnology for efficient application to be utilized in space technology, due to the cross-sectional characteristics of nanotechnology within nanomaterials, nanoelectronics, and nanomanufacturing. This paper provides the current state of art of nanotechnology in space technology by evaluating NASA's activities and the 9th frame of the project ANTARES(Analysis of Nanotechnology Applications in Space Developments and Systems) with the support of the German Aerospace Center (DLR), Space Flight Management, Division Technology for Space Systems and Robotics. It has shown that it is necessary to apply nanotechnology to space technology in order to achieve international competitiveness, for the nanotechnology can bring the previously impossible things to reality. Since KARI plans to send an unmanned probe to the moon's orbit and land a probe on the moon's surface in 2025, it is urgently needed to incorporate nanotechnology to national space development plan.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.381-386
• /
• 1985

This experiment was conducted to investigate changes of soybean curd yield according to the extension of soaking time during manufacturing of soybean curd. To investigate those changes systematically, transmission electron microscopy and disc-gel electrophoresis were used. The soybean curd yield was increased from 45.0% to 50.5% and 55.4% respectively as soaking time is extended from 5 hours to 10 and 24 hours. The solid extraction and soybean milk coagulation were also increased according to the extension of soaking time. From disc-gel electrophoresis patterns of soybean milk protein and soybean curd protein, numbers of band were increased and major band thickened by expending the soaking time. Most of high molecular bands of soybean milk protein were transfered to soybean curd. Crude 7S proteins of soybean milk and soybean curd in dis-gel electrophoresis were appeared to be 4 and 5 bands respectively, and crude 11S proteins of soybean milk and soybean curd were appeared to be 9 and 8 bands respectively. Of soybean milk bands, most of 11S component transfered to soybean curd. Transmission electron photomicrographs revealed that the dimension of each protein body became larger and the numbers of spherosome around the protein bodies in unit area fewer by extending the soaking time of soybean.

• Korean Journal of Environmental Biology
• /
• v.25 no.4
• /
• pp.289-296
• /
• 2007

Di-(ethyhexyl) phthalate (DEHP), commonly used as a plasticizer for manufacturing flexible vinyl products, has been the topic of extensive research, especially concerning endocrine disrupting properties. Metallothionein (MT) is a low molecular weight (6,000$\sim$7,000 Da), cysteine-rich (22$\sim$23%), metal-binding protein and is known to be induced by extrinsic factors such as chemical agents and stresses. Some of the known function of MT include detoxification of heavy metals and alkylating agents and neutralization of free radicals. Nonetheless, the definitive physiological function of MT are still unknown. This study was carried out to investigate the effects of DEHP on the ultrastructural changes and the expression of MT of the rat liver. The rats were orally intubated with either corn oil (experimental control) or 0.5 mg, 1.5 mg and 4.5 mg DEHP kg$^{-1}$ day$^{-1}$ in 0.5 mL of corn oil for 15 days before sacrificing and sampling. DEHP induced mild ultrastrctural changes of some cell organelles such as rough endoplasmic reticulum, mitochondria, lysosomes and peroxisomes in the rat liver treated with DEHP. In the respect of immunogold labelling and Western blotting, MT expression of the liver tissue was up-regulated by DEHP. In conclusion, DEHP has effects on the ultrastructures and hepatic function for MT expression in rat.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.434-435
• /
• 2012

Plasma enhanced chemical vapor deposition (PECVD) silicon dioxide thin films have many applications in semiconductor manufacturing such as inter-level dielectric and gate dielectric metal oxide semiconductor field effect transistors (MOSFETs). Fundamental chemical reaction for the formation of SiO2 includes SiH4 and O2, but mixture of SiH4 and N2O is preferable because of lower hydrogen concentration in the deposited film [1]. It is also known that binding energy of N-N is higher than that of N-O, so the particle generation by molecular reaction can be reduced by reducing reactive nitrogen during the deposition process. However, nitrous oxide (N2O) gives rise to nitric oxide (NO) on reaction with oxygen atoms, which in turn reacts with ozone. NO became a greenhouse gas which is naturally occurred regulating of stratospheric ozone. In fact, it takes global warming effect about 300 times higher than carbon dioxide (CO2). Industries regard that N2O is inevitable for their device fabrication; however, it is worthwhile to develop a marginable nitrous oxide free process for university lab classes considering educational and environmental purpose. In this paper, we developed environmental friendly and material cost efficient SiO2 deposition process by substituting N2O with O2 targeting university hands-on laboratory course. Experiment was performed by two level statistical design of experiment (DOE) with three process parameters including RF power, susceptor temperature, and oxygen gas flow. Responses of interests to optimize the process were deposition rate, film uniformity, surface roughness, and electrical dielectric property. We observed some power like particle formation on wafer in some experiment, and we postulate that the thermal and electrical energy to dissociate gas molecule was relatively lower than other runs. However, we were able to find a marginable process region with less than 3% uniformity requirement in our process optimization goal. Surface roughness measured by atomic force microscopy (AFM) presented some evidence of the agglomeration of silane related particles, and the result was still satisfactory for the purpose of this research. This newly developed SiO2 deposition process is currently under verification with repeated experimental run on 4 inches wafer, and it will be adopted to Semiconductor Material and Process course offered in the Department of Electronic Engineering at Myongji University from spring semester in 2012.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.4 s.59
• /
• pp.209-217
• /
• 2006

Emulsion is a dispersion system among liquids which are not miscible together. There are numerous cosmetic raw materials which have different physicochemical properties. Therefore, emulsion technology is very useful in cosmetics. With the development of emulsifier, several emulsification technologies have been developed. Since HLB method by Griffin in 1950's, PIT method, gel method, and D-phase methods, etc, have been developed. Recently, the application of natural emulsifier and polymeric emulsifier increases in cosmetics in order to achieve enhanced safety and biocompatibility. Besides nano-emulsion, multiple-emulsion, liquid crystal emulsion, and Pickering emulsion have been developed and applied as means of differentiating appearance and texture of products and achieving enhanced delivery of active ingredients. Meanwhile, the application studies of nano-dispersed structural system such as liposome or cubosome are on progress. Liposome is a bi- or multi-lamella layer dispersion system composed of amhiphilic molecules - phospholipids which are main components of plasma membrane. Cubosome also is a nano-sized dispersion system composed of a specific molecule like glyceryl monoloeate derived from natural products. And it has a cubic bicontinuous structure in water due to its unique molecular structure. Incorporating compounds (active materials) into such nano-particles can increase biocompatibility and delivery efficiency of target compounds. Manufacturing process and application of cosmetic emulsions and nano-particles are briefly introduced in this paper.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.30 no.2
• /
• pp.279-294
• /
• 2004

This study described about a liquid crystalline technology that is used in cosmetics industry. Various intermediate phases may exist between solid and liquid. At high surfactant concentration, several liquid crystalline phases can be made to have formed. Although molecular arrangement with crystallization is not regular, it is known that more relative regular state is liquid crystalline or meso-phase than liquid phase. Usually, it described in detail about manufacturing method that explained about a kind of liquid crystalline technology in cosmetics, a new liquid crystalline technology, and makes liquid crystalline. Specialty, it introduced about kind of special an emulsifier to form liquid crystalline. There were hydrogenated lecithin, ceramide, dipalmitoylhydroxyproline, DEA-cetyl phosphate, Gemini-surfactant in representative raw material to form liquid crystalline. Liquid crystalline extent that used polarization microscope to observe formation, and appears best from 400times, 600times, 1,000times well appeared. Also, droplet particle size that liquid crystal is made best 1.0-10.0$\mu\textrm{m}$ be. General emulsion more than superior result that measures the skin moisturizing effect to take advantage of liquid crystalline technology of vitamin was seen. As presence at a clinical result, wave and general emulsion more than superior result (more than 20%) that measures skin moisturizing effect about liquid crystalline of vitamin B$\_$5/ were seen (ANOMA t-test, p<0.05)

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.55-63
• /
• 2013

Applications of nano-emulsion for cosmetics as a means of promoting dermal absorption have been the subject of interest. In this study, the stability of nano-emulsions prepared by low-energy emulsification method and varying the composition of raw materials was investigated. By measuring the particle size of the nano-emulsion against time, the stability of nano-emulsions prepared by adding polyol to water phase was increased significantly compared with the nano-emulsions prepared by adding polyol to ethanol phase. The speed of adding ethanol phase to water phase did not have a significant impact on the particle size and stability. Depending on the type of oil, stability was not affected. However, there would be a correlation between the initial size of the nano-emulsion droplets and the molecular weight and polarity of the oil. Stability and the initial particle size according to the type of polyols showed a similar trend except 1,2 hexanediol. The initial droplet size was affected by the concentration of surfactant and oil. However, the initial droplet size did not change against time. Concentration of ethanol was observed to have a significant impact on the initial particle size and stability.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.702-710
• /
• 2013

Zaltoprofen loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/extraction method like oil-in-water (O/W) for sustained release of zaltoprofen. The influence of several preparation parameters such as fabrication temperature, stirring speed, intensity of the sonication, initial drug ratio, molecular weight ($M_w$) of POX, concentration of POX and concentration of emulsifier has been investigated on the zaltoprofen release profiles. Physicochemical properties and morphology of zaltoprofen loaded POX microspheres were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). Through the analyzed results, it was demonstrated that the characteristics of the microspheres greatly affected by the prepared condition. The releases behavior of zaltoprofen was investigated for 10 days in vitro. It was confirmed that the release behavior of zaltoprofen can be controlled by the manufacturing factor of solvent-evaporation/extraction method.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.76-81
• /
• 2012

Silk protein has been explored to be used for biomedical applications for several decades. However, it has not been used in this field cause to their irreversible crystallization after dissolving in water. The existing methods of silk protein hydrolysis using silkworm cocoon were used with harmful solvents and through a very complicated process. Therefore, we have developed novel methods for the production of water-soluble hydrolysate using silkworm gland. We manufactured two types of silkworm gland-derived hydrolysate (water-soluble SGH, SSGH; total SGH, TSGH) and compared the characteristics with commercial cocoon-derived sericin hydrolysate (CSH). The molecular weight of SGH ranged from 7 to 50 kDa (SSGH) and 5 to 15 kDa (TSGH) within glycine, alanine, and aspartic acid as a main amino acid composition. In contrast, CSH ranged from 15 to 50 kDa within serine and aspartic acid. The results of FTIR implied that SGH was more soluble form than CSH, as shown by the decrease in the ${\beta}$-sheet structure at $1630cm^{-1}$ on amide I peak. In comparison with 10% fetal bovine serum, 0.1% (1 mg/ml) SSGH had equivalent effect on the proliferation of human dermal fibroblasts and mesenchymal stem cells. All results of the SSGH made by novel manufacturing process indicate the SSGH is more preferable as a culture medium supplement than cocoon-derived sericin.