• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.12
• /
• pp.2215-2226
• /
• 2000

Adsorption characteristics for homologous xanthates on quartz surface has been investigated by FT-IR spectroscopy to understand the adsorption mechanism in relation with verification of the influence of surfactants on the stability of hydrophilic suspended solids in aqueous system. Contact angle measurement for water droplets on quartz surface treated with xanthate was also conducted as a supplementary study for spectroscopic investigation to grant a reliability to the interpretation of experimental results. It has been observed that monolayer of ethyl xanthate was formed on quartz surface as the adsorption progressed and double layer of ethyl xanthate was formed eventually through the reverse oriented adsorption of xanthate molecules on the monolayer. Similar trend of adsorption to the case of ethyl xanthate was found for propyl and butyl xanthates and adsorption was observed to occur more rapidly as the number of carbon atom in alkyl group of xanthate homologs increased. Thermodynamic aspect of adsorption was discussed using Young's equation and the variation in adsorption rate was examined according to the concentration of ethyl xanthate. Based on the result, it has been concluded that the adsorption features of surfactant on substrate in aquatic system is governed by molecular structure and concentration of surfactant and its residual time in aqueous environment as dissolved state also influences greatly the stability of hydrophilic suspended particles.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.11
• /
• pp.729-734
• /
• 2012

During chlorination processes dissolved organic nitrogen (DON) can form toxic nitrogenous disinfection byproducts and organic chloramines which have little or no bactericidal activity. DON needs to be removed before chlorination processes to reduce the formation of those products. This study investigated the removal of DON from surface water and reclaimed water by coagulation with aluminum sulfate (alum) and a cationic polymer (polyDADMAC). Removal characteristics of dissolved organic carbon (DOC) and ultraviolet absorbance at 254 nm ($UVA_{254}$) were compared with that of DON. Coagulation with alum removed DON, DOC, and $UVA_{254}$ with similar trends, but the removal of $UVA_{254}$ was highest. A dual coagulation strategy of alum and cationic polymer improved the removal of DON. Coagulation with cationic polymer alone was not effective due to its narrow range of charge neutralization. DON in reclaimed water was easier to remove than that in surface water, and higher molecular weight fraction (>10,000 Da) of DON was preferentially removed.

• The Korean Journal of Pesticide Science
• /
• v.15 no.2
• /
• pp.166-176
• /
• 2011

Bacillus thuringiensis CAB530 was isolated from dead Anomata albopilosa (Rutelidae: Coleoptera) and soil of green tea field, and confirmed its insecticidal activities. CAB530 isolate showed a high insecticidal activity against the beet armyworm among the many lepidopteran insects that are difficult to control. $LC_{50}$ value of CAB530 isolate against the second larva of Spodoptera exigua was $1.49{times}10^4$ spore concentration (cfu/$m{\ell}$). SDS-PAGE result of insecticidal toxin protein of CAB530 isolate showed a band at 130 kDa that is similar pattern with B. thuringiensis subsp. kurstaki that took insecticidal activity against S. exigua. Otherwise, the crystal protein of the CAB530 isolate was conformed at 65 kDa level after 30 minute of incubation in S. exigua midgut juice. Six crystal genes (cry1Aa, cry1Ab, cry1C, cry1D, cry1F and cry1I) were identified by PCR. It different from genes of B. thuringiensis subsp. kurstaki. Crystal shape and pattern of toxin protein was similar with B. thuringiensis subsp. kurstaki, however, insecticidal activity and PCR result of CAB530 isolate was similar with B. thuringiensis subsp. aizawai.

• Elastomers and Composites
• /
• v.36 no.4
• /
• pp.225-236
• /
• 2001

In order to improve the properties of the copolymer and the terpolymer that was used as removal-type pressure sensitive adhesive(PSA), we synthesized quaterpolymer with the variation of the types of monomer, initiator, and solvent, and concentration, the monomer/solvent ratio, reaction temperature and time. and determined the properties of this adhesive: the viscosity, molecular weight, conversion, solid content and structure of polymer. The prepared polymer was crosslinked by changing the type of crosslinking agent and concentration, and then we investigated the characteristics or adhesive such as peel adhesion, shear adhesion, heat resistance, weathering resistance and peel adhesion to aging. The optimum performance of RA/2- EHA/MMA/2-HEMA as a PSA were obtained when benzoyl peroxide was used as an initiator with the reactant mixture consisted of 80% BA and 2-EHA, 15%, MMA, and 5% 2-HFMA. The optimum reaction temperature and time were $80^{\circ}C$ and 8 hours, respectively. For BA/2-EHA/MMA/AA, the optimum performance was obtained when the polymerization was performed at the monomer composition of 80% BA/2-EHA, 15% MMA, and 5% AA. BPO was used as initiator and the optimum reaction temperature and time were identical to those of BA/2-EHA/MMA/ 2-HEMA. Isocyanate and melamine were used to crosslink BA/2-EHA/MMA/2-HEMA and BA/2-EHA/MMA/AA, respectively. No effect on the type of cross-linking agent on the peel adhesion was observed with aging. The quarterpolymers crosslinked with melamine left residues on the counter surface after weathering resistance test, while the polymers crosslinked with isocyanate did not.

• Elastomers and Composites
• /
• v.49 no.1
• /
• pp.43-52
• /
• 2014

The effect of nanoclay (Cloisite 20A) on the self-adhesion behavior of uncured brominated-isobutylene-isoprene rubber (BIIR) has been studied. The dispersion state of nanoclay into the rubber matrix was examined by SEM, TEM and XRD analysis. The thermal degradation behavior of the filled and unfilled samples was examined by TGA and improvement in the thermal stability of the nanocomposites occurred based on the weight loss (%) measurements. Also, addition of nanoclay enhanced the cohesive strength of the material by reinforcement action thereby reducing the degree of molecular diffusion across the interface of butyl rubber. However, the average depth of penetration of the inter-diffused chains was still adequate to form entanglement on either side of the interface, and thus offered greater resistance to peeling, resulting in high tack strength measurements. The improvement in tack strength was only achieved at critical nanoclay loading above 8 phr. Contact angle measurement was also made to examine the surface characteristics. There was no significant interfacial property change by employing the nanoclay.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.149-158
• /
• 2000

Oil-absorptive expanded polyurethane (EPU) was prepared with a lypophilic polyol, polypropyleneglycol (PPG) as the soft segment, and toluenediisocyanate (TDI) and $H_2O$ as the hard segment. PPGs haying various average molecular weights ((equation omitted) : 1000, 2000, 3000) were employed to investigate that the soft segment content was consequent on the oil-absorptivity and the mechanical properties of the EPUs. As (equation omitted) of PPG was decreased from 3000 to 1000, the oil-absorptivity and the tensile strength of the EPUs increased from 1460 to 3010% and from 0.26 to 0.55 $kg_{f}$ /$cm^2$ respectively. As the hard segment content ratio, ${\gamma}$ ([NCO]/[OH]) was increased from 1.0 to 1.2, the tensile strength of the EPUs increased from 0.56 to 0.95 $kg_{f}$ /$cm^2$, due to the formation of allophanate and/or biuret bondings. However, as the surfactant (S-A) content was increased from 1.0 to 2.5 pbw, the oil-absorptivity was decreased from 3634 to 3312%, due to the formation of closed cell structures.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.81-92
• /
• 1996

This study was conducted to characterize mulberry varieties by the analysis of morphological characters as well as biochemical and molecular biological markers. As for the budding stage Geumsang, Chosang i and Yeongbyeonchuwoo were early, but Dangsang 6, Hwangchuwoo were late. The lowest varietiy in rate of death atop was Dangsang 8(0.0%). Suncheonppong was the highest leaf yields in spring and autumn rearing season. In biochemical isozyme analysis, peroxidase gave good zymogram patterns in isoelectric focusing electrophoresis. There were high variations in RAPD analysis among the mulberry trees. From the obtained peroxidase and RAPD variations, cluster phylogenetic analysis was carried out using NT-SYS PC program. There were no clear grouping patterns between native varieties and leading varieties. The highest similarity was observed between Suwonsang 1 and Suwonsang 2 at about 90% similarity level.

• Membrane Journal
• /
• v.26 no.4
• /
• pp.239-252
• /
• 2016

Two-dimensional materials offer unique characteristics for membrane applications to water technology. With its atomic thickness, availability and stackability, graphene in particular is attracting attention in the research and industrial communities. Here, we present a brief overview of the recent research activities in this rising topic with bringing two membrane architecture into focus. Pristine graphene in single- and polycrystallinity poses a unique diffusion barrier property for most of chemical species at broad ambient conditions. If well designed and controlled, physical and chemical perforation can turn this barrier layer to a thinnest feasible membrane that permits ultimate permeation at given pore sizes. For subcontinuum pores, both molecular dynamics simulations and experiments predict potential salt rejection to envisage a seawater desalination application. Another novel membrane architecture is a stack of individual layers of 2D materials. When graphene-based platelets are chemically modified and stacked, the interplanar spacing forms a narrow transport pathway capable of separation of solvated ions from pure water. Bearing unbeknownst permeance and selectivity, both membrane architecture - ultrathin porous graphene and stacked platelets - offer a promising prospect for new extraordinary membranes for water technology applications.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.10
• /
• pp.4281-4287
• /
• 2014

Background: Methylation of tumor suppressor genes has been investigated in all kinds of cancer. Tumor specific epigenetic alterations can be used as a molecular markers of malignancy, which can lead to better diagnosis, prognosis and therapy. Therefore, the aim of this study was to evaluate the association between gene hypermethylation and expression of fragile histidine triad (FHIT), glutathione S-transferase P1 (GSTP1) and p16 genes and various clinicopathologic characteristics in primary non-small cell lung carcinomas (NSCLC). Materials and Methods: The study included 28 primary non-small cell lung carcinomas, where an additional 28 tissue samples taken from apparently normal safety margin surrounding the tumors served as controls. Methylation-specific polymerase chain reaction (MSP) was performed to analyze the methylation status of FHIT, GSTP1 and p16 while their mRNA expression levels were measured using a real-time PCR assay with SYBR Green I. Results: The methylation frequencies of the genes tested in NSCLC specimens were 53.6% for FHIT, 25% for GSTP1, and 0% for p16, and the risk of FHIT hypermethylation increased among patients with NSCLC by 2.88, while the risk of GSTP1 hypermethylation increased by 2.33. Hypermethylation of FHIT gene showed a highly significant correlation with pathologic stage (p<0.01) and a significant correlation with smoking habit and FHIT mRNA expression level (p<0.05). In contrast, no correlation was observed between the methylation of GSTP1 or p16 and smoking habit or any other parameter investigated (p>0.05). Conclusions: Results of the present study suggest that methylation of FHIT is a useful biomarker of biologically aggressive disease in patients with NSCLC. FHIT methylation may play a role in lung cancer later metastatic stages while GSTP1 methylation may rather play a role in the early pathogenesis.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.248-258
• /
• 1979

Glucose 6-phosphate dehydrogenase of Leuconostoc mesenteroides which was purifid by an affinity chromatography was studied on the characterization, kinetics and chemical modification. The apparent molecular weight of the enzyme was 112,000 by the gel filtration method of Sephadex G-200 column. The optimum temperature of $NAD^+$-linked reation was 50$^{circ}C$ and the activation energy and the heat of inactivation were 8.36 kcal/mole and -58.2kcal/mole, respectively. The steady state kinetic study showed KG6P, Kemp, and CX KNADP to be 76.9 PM, 7.46${\mu}M$ and 7.14 ${\mu}M$, respectively, and KGGP, KNAD,and aKNm to be 53.7${\mu}M$, 115.2${\mu}M$ and 702.2${\mu}M$ for the $NAD^+$-linked reaction at pH 7.8, optimum pH. The pH dependent kinetic constants suggested that the two ionizing groups whose pKa is 7.2 .and pKb is 9.0-9.6 were involved in the enzyme-substrate interaction. Evidence by photooxidation and carboxymethylation of the enzyme suggested that the imidazole group of histidine with pKa group may participate in the catalytic site.