• KSBB Journal
• /
• v.11 no.3
• /
• pp.317-322
• /
• 1996

Galactooligosaccharlde (GOS) is a kind of functional oligosaccharides that can be used as a food ingredient and a cosmetic additive. In this paper, characteristics of GOS synthesis by cellulase, using lactose as a substrate, were investigated. Penicillium funiculosum cellulose was found to be the most efficient for GOS production among six cellulose tested. The optimum pH and temperature for GOS production were 5.0 and $50^{\circ}C$, respectively. There was an optimum ratio of lactose concentration to enzyme loading; the value was 10 (w/w). The reaction pattern of P. funiculosum cellulase is consistent with that of microbial ${\beta}$-galactosidase which shows transgalactosylation activity. Amounts of GOS produced from 20% (w/v) lactose after 6 h incubation at $50^{\circ}C$, were 23% (w/w) based on total saccharide in the reaction medium. The GOS % increased with initial lactose concentration in the range of 5 to 20%. The products mainly consisted of a trisaccharide and tetrasaccharide from HPLC and TLC analysis. Among enzymes involved in transgalactosylation reaction, high molecular weight fractions over 50,000 Da, presumably ${\beta}$-glucosldase, were considered to be responsible for GOS production. Using this cellulose, a direct synthesis of galactosyl g1ucoside including GOS could be readily achieved with lactose as a galactosyl donor.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.7
• /
• pp.595-600
• /
• 2014

The characteristics of kinetic energy transfer during a collision between a rigid target particle on a surface and a fragile bullet particle moving at a high velocity were analyzed using molecular dynamics simulation. Bullet particles made of $CO_2$ were considered and their size, temperature, and velocity were varied over a wide range. The fraction of kinetic energy transferred from the bullet particle to the target particle was almost independent of the former's size or velocity; however, it was sensitively dependent on its temperature, which can be attributed to the change in the bullet rigidity with temperature. This fraction was nearly twice as high for $CO_2$ bullets as for Ar bullets. This result explains the reason for the more superior cleaning performance of $CO_2$ bullets than Ar bullets with regard to contaminants in the 10 nm size range.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.192-198
• /
• 2006

In this study, the light addressable potentiometric sensors (LAPS) with $Si_{3}N_{4}/SiO_{2}/Si$, and $Ta_{2}O_{5}/SiO_{2}/Si$ structures were fabricated. The penicillinsae was immobilized on the devices to hydrolyze the penicillin using self-assembled monolayer (SAM) method. Then response characteristics according to the penicillin concentrations were measured and compared. The measuring system was simplified by using LabVIEW. The pH response characteristics of fabricated devices are 56 mV/pH ($Si_{3}N_{4}$ sensing membrane) and 61 mV/pH ($Ta_{2}O_{5}$ sensing membrane). The sensitivity of sensor by enzyme reaction result of the enzyme reaction were 60 mV/decade and 74 mV/decade for $Si_{3}N_{4}/SiO_{2}/Si$ and $Ta_{2}O_{5}/SiO_{2}/Si$ structure, respectively, in the range of $0.1\;mM{\sim}10\;mM $of the penicillin concentration.

• Journal of Animal Science and Technology
• /
• v.57 no.12
• /
• pp.44.1-44.9
• /
• 2015

Background: Heat shock proteins play an important role in protection from stress stimuli and metabolic insults in almost all organisms. Methods: In this study, computational tools were used to deeply analyse the physicochemical characteristics and, using homology modelling, reliably predict the tertiary structure of the blunt snout bream (Ma-) Hsp70 and Hsc70 proteins. Derived three-dimensional models were then used to predict the function of the proteins. Results: Previously published predictions regarding the protein length, molecular weight, theoretical isoelectric point and total number of positive and negative residues were corroborated. Among the new findings are: the extinction coefficient (33725/33350 and 35090/34840 - Ma-Hsp70/ Ma-Hsc70, respectively), instability index (33.68/35.56 - both stable), aliphatic index (83.44/80.23 - both very stable), half-life estimates (both relatively stable), grand average of hydropathicity (-0.431/-0.473 - both hydrophilic) and amino acid composition (alanine-lysine-glycine/glycine-lysine-aspartic acid were the most abundant, no disulphide bonds, the N-terminal of both proteins was methionine). Homology modelling was performed by SWISS-MODEL program and the proposed model was evaluated as highly reliable based on PROCHECK's Ramachandran plot, ERRAT, PROVE, Verify 3D, ProQ and ProSA analyses. Conclusions: The research revealed a high structural similarity to Hsp70 and Hsc70 proteins from several taxonomically distant animal species, corroborating a remarkably high level of evolutionary conservation among the members of this protein family. Functional annotation based on structural similarity provides a reliable additional indirect evidence for a high level of functional conservation of these two genes/proteins in blunt snout bream, but it is not sensitive enough to functionally distinguish the two isoforms.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.762-768
• /
• 1988

The lipolytic enzyme of milk from hormone treated and non treated cows was isolated and purified, It was shown that the crude lipase extract from the milk before and after a hormone treatment of the cows was different in color, foaming properties, yield and specific activity. Final purification of the lipase system was achieved by affinity chromatography on Heparin-Sepharose CL-6B. The lipase bound by Heparin-Sepharose was then characterised. The pH-optimum of the purified enzyme was 8.5 for butteroil emulsion as a substrate and the optimum temperature was $30^{\circ}C$ respectively. The molecular weight. determined by SDS-polyacrylamidegel electrophoresis, was about 70,000. The activity increased by 10% hen 0.01% bovine serum albumin was added to the substrate. The results indicate the enzymes obtained by affinity chromatography from milk before and after hormone treatment had the similar characteristics. The second lipolytic active component that was not bound by Heparin-Sepharose must be the cause of spontaneous rancidity.

• Korean Journal of Veterinary Research
• /
• v.36 no.2
• /
• pp.379-387
• /
• 1996

The objects of the present study were to establish the method of purification, subunit dissociation of verotoxin-2 (VT2) produced by Escherichia coli O157:H7, and to investigate the characteristics of purified verotoxin-2 such as molecular weight and composition of amino acid. The results were summerized as follows; Verotoxin-2 was extracted by addition of polymyxin B sulfate into bacterial cell lysate prepared from Escherichia coli O157:H7(KSC109). As an initial step, the bacterial cell lysate was precipitated with 30% saturated ammonium sulfate. The precipitated crude toxin was then subjected to anion-exchange, chromatofocusing and cation-exchange chromatography. Using this scheme, we obtained highly purified toxin with a specific activity of $1.1{\times}10^9$ $CD_{50}/mg$. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) for purified VT2 showed two protein bands. The upper band, approximately 32 Kd, was supposed as A subunit and the lower band, approximately 7.7 Kd, was supposed as B subunit. When the toxin was separated in the subunit-dissociating solution, two peaks emerged with retention times of 15 and 28 min by HPLC. These peaks represented A subunit and B subunit, respectively. The amino acid composition of purified VT2 were made up in order of glutamic acid, histamine, asparaginic acid, histidine, lysine, alanine and leucine etc. The largest amount among the amino acid composing VT2 was methionine.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.279-289
• /
• 2018

N-nitrosodimethylamine (NDMA) is a class of disinfection byproducts and a frequently detected nitrosamine with carcinogenic potentials. This review summarizes NDMA precursors, their formation mechanisms in chloraminated water, and mitigation strategies. Understanding the formation mechanism and characteristics of precursors is essential for developing a mitigation strategy. Dimethylamine (DMA), the most widely studied NDMA precursor, has an NDMA molar yield up to 3%. In comparison, a subset of tertiary amines, e.g., pharmaceuticals, generate up to 90% upon chloramination. Potent NDMA precursors, are characterized by their negative partial charge, low planarity values and molecular weight, and high bond length and $pK_a$ values. A nucleophilic substitution of tertiary amine on chloramine is a key reason for the high NDMA yield from the most potent NDMA precursors. The distribution and fate of NDMA in surface water, aquifers, and its formation in the distribution system can be mitigated through two strategies: (1) degrading or/removing NDMA after its formation and (2) pre-treatment of its precursor's prior chloramination.

• Membrane Journal
• /
• v.18 no.2
• /
• pp.146-156
• /
• 2008

In this study, PTMSP of high permeability and high molecular weight was synthesized, and PTMSP-PDMS graft copolymer was synthesized from poly [1-(trimethylsily)propyne] (PTMSP) and hydroxy-terminated poly(dimethylsiloxane) (PDMS). The PTMSP-PDMS-silica composites were prepared by the addition of 15, 30, or 50 wt% tetraethoxysilane (TEOS) to PTMSP-PDMS graft copolymer by sol-gel process. To investigate the physico-chemical characteristics of PTMSP-PDMS-silica/PEI composite membranes, the analytical methods such as $^1H$-NMR, FT-IR, TGA, XPS, GPC, and SEM have been utilized. The gas permeability and selectivity properties of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4,\;n-C_4H_{10}$, were evaluated. Permeability of the composite membranes increased as TEOS content and pressure increased. Selectivity of $H_2,\;O_2,\;N_2,\;CO_2,\;CH_4,\;and\;n-C_4H_{10}$, showed the maximum value at 30 wt% of TEOS content and decreased thereafter.

• The Korean Journal of Mycology
• /
• v.47 no.4
• /
• pp.291-301
• /
• 2019

Nematophagous fungi can capture, kill, and digest nematodes using a specific capturing organ. Of the nematophagous fungi, while Arthrobotrys flagrans and A. superba have been described previously, certain characteristics have not been described. For a detailed description of the two nematophagous fungi, the fungi were isolated from soil samples and produced in a pure culture. Morphological characteristics, such as predatory ability (according to the nematode species), shape, and size of predatory organ, conidia, and chlamydospore were investigated and they were used for identification of the fungal isolates along with molecular phylogenetic analysis. Furthermore, this study provides the classification key for 21 nematophagous species.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.278-282
• /
• 2007

The degradation characteristics of perfluoropolyether (PFPE) for computer hard disk drive have been investigated. Thermal degradation in PFPE started at $170\;^{\circ}C$ and it was completed at $450\;^{\circ}C$. If PFPE was contacted with wear fragment from slider made by $Al_2O_3{\cdot}TiC$, the thermal degradation was accelerated by the catalytic Lewis acid degradation. The Lewis acid degradation mainly took placed in methylene oride(fluoride) chain scission as well as methylene(fluoride) and hydroxy end chain. As a result, the degradation reaction accomplished as early as at $300\;^{\circ}C$. The photo oxidation due to UV exposure on PFPE caused the chain scission in methylene(fluoride), and end chain in PFPE without chain scission in methylene oxide(fluoride) and then the molecular weight of PFPE increased by expected secondary reactions between formed radicals in the photo oxidation.