• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.151-155
• /
• 1995

Two types of modified celluloses which contain trinitrophenyl groups as chromophore were synthesized from carboxymethyl cellulose Whatman CM 70 and CM 32. Diaminoethyl groups were added to the CM 70 and CM 32 to make DAE-CM celluloses and then the DAE-CM groups were substituted by 2,4,6-trinitrophenyl groups to produce TNP-celluloses. Average particle size of the TNP-cellulose from CM 32 was $44.6{\pm}9.6{\mu}m$ in diameter and $127.9{\pm}22.5{\mu}m$ in length, which was much smaller than those from CM 70, however its TNP-moiety per gram determined by using the molar extinction coefficient $1.33{\times}10^4$ of ${\varepsilon}$-TNP-lysine at 345 nm, was 0.68 millimoles, which was 5.6-fold greater than those from CM 70. The absorption spectrum of TNP-oligosaccharides which were the soluble products of TNP-celluloses by a cellulase preparation Onozuka R-10, showed a maximal peak at 344 nm. Increases in the absorbance during hydrolysis were linear with the enzyme concentration, and the differences of slope values between two types of TNP-celluloses that the more semsitive assay could be achieved by using those from CM 32 as substrate at the low range of the enzyme concentration.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.46-53
• /
• 1993

The kinetic and equilibrium characteristics of copper extraction by salicylaldoxime in chloroform and benzene were investigated. Equilibrium constants such as dissociation constant, distribution coefficient of salicylaldoxime and stability constant, distribution coefficient and molar extinction coefficient of oxime-Cu chelate were determined from absorbance. Extracted species of Cu-chelate were found to be ${\bar{CuR_2}}$. Overall initial extraction rate of copper by salicylaldoxime in chloroform was expressed by the following equation : $R=k[Cu^{2+}]{\bar{[HR]}}^{0.5}/[H^+]^{0.4}$.

• Journal of Photoscience
• /
• v.8 no.3_4
• /
• pp.113-117
• /
• 2001

Several styrylquinolium salts were synthesized to investigate their absorption and thermal properties, which had five different p-aminobenzene units and three different counter ions (iodide, perchlorate, and hexafluorophosphorate anion), respectively. Hydroxy, methoxy, and methyl group in the meta position to the amino group led to bathochromic shift, while Ν-ethyl-Ν-chloroethylamino unit instead of Ν,Ν-diethylamino unit resulted in hypsochromic shift. A dye having a methoxy group in the meta position to the amino group had the highest molar extinction coefficient ($\xi$), while a dye carrying chloro group in Ν-alkyl chains had the lowest $\xi$. The type of counter ions had no effect on spectral properties like the maximum absorption wavelength and $\xi$. All styryl dyes had exothermic peaks at decomposition in DSC curves. Among these styryl dyes, S2 series with perchlorate anions showed the strongest exothermic decomposition. From TGA spectra, S3 series with hexafluorophosphorate anions had the best thermal stability and the sharpest threshold at thermal decomposition.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.290-296
• /
• 2014

In order to produce black disperse dye which has high heat resistance and depth color for polyester(PET), an orange disperse dye was designed and synthesized with pyridine based derivatives to get high heat resistance. Disperse blue dye adopts heterocycles structure for high molar extinction coefficient and long wavelength absorption. Synthesized disperse dye is micronized to an particle size of $0.7{\mu}m$. The mixing condition for black color using commercial disperse violet 93 is blue dye 30%, red dye 21%, and orange dye 21%, respectively. Dyed PET fabric with synthesized dye has quiet good color fastness to sublimation(grade 3-4) and has excellent rubbing, washing and light fastness grade 4-5.

• Journal of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.101-105
• /
• 1965

Spectrophotometric method for the determination of Co(Ⅱ) is developed based on the fact that Co(Ⅱ) forms a stable red complex with 7-nitroso-8-hydroxyquinoline-5-sulfonate at pH 4. 5. The absorbance is measured at 528$m{\mu}$, $25^{\circ}C$. Beer's law is followed in the concentration range of 0. 3 to 6. 0 p.p.m. of Co(Ⅱ) and molar extinction coefficient of the complex was $1.1{\times}10^4$. Of the diverse ions checked, Fe(Ⅱ), Fe(Ⅲ), Cu(Ⅱ), Mn(Ⅱ), Hg(Ⅰ), CN-, EDTA interfere. The composition of the complex is found to be 3:1 ligand to metal species by mole ratio and continuous variation methods.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.3
• /
• pp.167-171
• /
• 1988

Formation of intermolecular charge-transfer complexes between 7,7,8,8-tetracyanoquinodimethane (TCNQ) and two different series of stilbene derivatives has been studied spectroscopically at $25^{\circ}$C in 1,2-dichloroethane. The compounds of Series I include stilbene and derivatives which have fused phenyl rings on one end of the central ethylene structure and a phenyl ring on the other end. The other Series, II, is comprised of stilbenes which have various para substituents on one of the two phenyl rings. The equilibrium constant, $K_c^{AD}$ and the molar extinction coefficient, ${\varepsilon}_{\lambda}^{AD}$, were determined using the Scott equation. The values of the charge-transfer transition frequency, ${\vu}_AD$ and $K_c{AD}$ correlated well respectively with the ionization potentials of the fused rings of Series Ⅰ or of the compounds of Series II and with the values of ${\sigma}_p$, the Hammett constants of the Series II substituents. trans-4-N,N-Dimethylaminostilbene and trans-4-nitrostilbene were found to be able to participate in electron transfer reaction with TCNQ forming the corresponding anion radical, TCNQ$^-$:

• Advances in nano research
• /
• v.14 no.6
• /
• pp.557-573
• /
• 2023

The rapid growth of zinc-oxide (ZnO) nanostructures (NSs) on woven carbon fiber (WCF) is reported in this study employing a microwave-aided chemical bath deposition process. The effects of different process parameters such as molar concentration, microwave duration and microwave power on morphologies and growth rate of the ZnO on WCF were studied. Furthermore, an attempt has been taken to study influence of different type of growth solutions on ZnO morphologies and growth rates. The surface functionalization of WCF fabrics is achieved by successful growth of crystalline ZnO on fiber surface in a very short duration through one-step microwave synthesis. The morphological, structural and compositional studies of ZnO-modified WCF are evaluated using field-emission scanning electron microscopy, X-ray diffraction and energy dispersive X-ray spectroscopy respectively. Good amount of zinc and oxygen has been seen in the surface of WCF. The presence of the wurtzite phase of ZnO having crystallite size 30-40 nm calculated using the Debye Scherrer method enhances the surface characteristics of WCF fabrics. The UV-VIS spectroscopy is used to investigate optical properties of ZnO-modified WCF samples by absorbance, transmittance and reflectance spectra. The variation of different parameters such as dielectric constants, optical conductivity, refractive index and extinction coefficient are examined that revealed the enhancement of optical characteristics of carbon fiber for wide applications in optoelectronic devices, carbon fiber composites and photonics.

• Journal of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.510-515
• /
• 1985

Color of $MoO_{(aq)}^{3+}$ in concentrated methanesulfonic acid (∼10M) changes dark green due to the formation of $Mo_2O_2(OH)_{2(aq)}^{4+}$ dimer. This color is similar to that shown by addition of water to that shown by addition of water to green $MoO_{(aq)}^{3+}$ solution in 15-16M methanesulfonic acid. The molar extinction coefficient of monomer in 15M methanesulfonic acid is about 20 at 415nm. Rate constants are independent on the aquomolybdenum (V) and hydrogen ion concentration under the condition of this experment. Bridging hydroxides of $Mo_2O_2(OH)_{2(aq)}^{4+}$ are dehydrogenated at the less concentration of ∼6 M for HPTS and ∼10M for $CH_3SO_3H$. The structure of both the yl-oxygens and the bridging oxygens of final product is identified to (*image)unit.

• Tribology and Lubricants
• /
• v.32 no.5
• /
• pp.141-146
• /
• 2016

The diketopyrrolopyrrole (DPP) pigment is a bicyclic 8-π-electron system containing two lactam units. Typical DPP derivative pigments have melting points of over 350°C and very low solubility in most solvents, and show absorption in the visible region with a molar extinction coefficient of 33,000 dm²mol⁻¹ and strong photoluminescence with maxima in the range 500–600 nm. X-ray structure analyses of DPP show that the whole molecule is almost in one plane. The phenyl rings are twisted out of the heterocyclic plane and the intermolecular hydrogen bonding between neighboring lactam NH and carbonyl units influences the structure of the DPP pigment in the solid state. In this study, mono-N-alkylation and mono-N-arylation were undertaken for Pigment Red 264 or Pigment Orange 73 with alkyl halide and aryl halide, respectively, in the presence of sodium tert-butoxide as a base catalyst to improve the solubility of DPP pigments and their application as CO₂ indicators. The synthetic yield was in the range 11–88%. The indicator dyes are highly soluble in organic solvents and shows pH-dependent absorption (λ_max 501 and 572 nm for the protonated and deprotonated forms, respectively) and emission (λ_max 524 and 605 nm for the protonated and deprotonated forms, respectively) spectra. The mono-N-alkylated and mono-N-arylated DPP pigment was identified by ¹H-NMR (¹H-Nuclear Magnetic Resonance Spectrometer), FT-IR (Fourier Transform Infrared Spectroscopy), and MS (Mass Spectrometry). According to the results of color and hue properties obtained by a color matching analyzer, the synthesized DPP pigment material can be used as a CO₂ indicator.

• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.63-68
• /
• 2008

This study was performed to assess the potential use of ozone or UV radiation for the treatment of water contaminated with sulfamethoxazole (SMX), which is frequently used antibiotic in human and veterinary medicines, especially focusing on the kinetic study and effect of pH. In a study using ozone alone, kinetic study was performed to determine second-order rate constant ($k_{O3,SMX}$) for the reactions of SMX with ozone, which was found to be $1.9{\times}10^6M^{-1}s^{-1}$ at pH 7. The removal efficiencies of SMX by ozone were decreased with increase of pH due to rapid decomposition of ozone under the condition of various pH (2.5, 5.3, 7, 8, 10). In a UV irradiation study at 254 nm, a kinetic model for direct photolysis of SMX was developed with determination of quantum yield ($0.08mol\;Einstein^{-1}$) and molar extinction coefficient ($15,872M^{-1}cm^{-1}$) values under the condition of quantum shielding due to the presence of reaction by-products formed during photolysis. For effect of pH on photolysis of SMX, SMX in the anionic state ($S^-$, pH > 5.6), most prevalent form at environmentally relevant pH values, degraded more slowly than in the neutral state (SH, 1.85 < pH < 5.6) by UV radiation at 254 nm.