• 제목/요약/키워드: Moisture test value

검색결과 405건 처리시간 0.026초

침지시간을 달리한 건식 쌀가루 막편의 품질특성 (A Study on Quality Characteristics of Makpyeon made of Dry Milled Rice Powder according to Soaking Time)

  • 조윤주;윤혜현
    • 한국조리학회지
    • /
    • 제24권3호
    • /
    • pp.35-46
    • /
    • 2018
  • This study investigated the quality characteristics of makpyeon made of dry milled rice powder according to soaking time. Makpyeon samples made of dry milled rice powder were analyzied with various soacking time, the moisture content, pH, Hunter's color value texture characteristics, attribute difference test and acceptance test. The moisture content of makpyeon did not indicate difference among samples. pH resulted in MS90 showed the lowest moisture content. The L-value (lightness) and a-value (greenness) result in that MS0 showed the highest and decreased according to soaking time. The b-value (yellowness) increased according to soaking time, MS90 showed the highest. TPA resulted in that MS90 indicated the highest hardness, chewiness, gumminess and the lowest adhesiveness. Hardness of makpyeon samples was higher than sulgitteok samples, adhesiveness was lower than those of sulgitteok in each soaking time. Based on attribute difference test, the score of brightness, moistness, glossy, particle size were decreased and firmness were increased according to soaking times. Flavor, taste and mouth feel attribute was stronger in makpyeon samples with the longer soaking time. Acceptance results showed that MS0 and MS30 (soaking for 30 min) were preferred the most. Also limitations and future research directions of this study were discussed.

습도를 고려한 절연유 시험 결과의 보정 방안 연구 (Correction Measures That Take Humidity into Account in Insulating Oil Test Measurement Results)

  • 김완수;노재필;강석구
    • 한국전기전자재료학회논문지
    • /
    • 제37권5호
    • /
    • pp.541-546
    • /
    • 2024
  • Climate conditions, especially transport and storage, are a very important factor in the process of sampling and testing insulation oil in the field. The samples of insulating oil exposed to the atmosphere affect the dielectric strength, total acid number and moisture test value by oxygen and high humidity environment and may also affect the results according to the criteria specified in each test. Therefore, reliable test values for insulating oil testing require consideration of the atmospheric environment of the test site, including oxygen and humidity. In this paper, each test was conducted on insulating oil exposed to various time and humidity environments, and the effect of the atmospheric environment on the test results was analyzed by comparing and analyzing with the first insulating oil.

고추 건조과정에 있어서 평균 수분함량 및 온도에 따른 Carotenoid파괴 및 비효소적 갈변 (Carotenoid Destruction and Nonenzymatic Browning during Red Pepper Drying as functions of Average Moisture Content and Temperature)

  • 이동선;김현구
    • 한국식품과학회지
    • /
    • 제21권3호
    • /
    • pp.425-429
    • /
    • 1989
  • 고추의 건조 중 중요한 품질요소인 carotenoid 파괴 및 비효소적 갈변의 kinetics를 건조 중 품질측정을 이용한 dynamic test에 의하여 평균 수분함량과 온도의 함수관계를 결정하였다. 1차반응으로 가정된 carotenoid 파괴 속도상수는 고온 고수분에서 높았으며 수분의존성에 있어서 건조중간의 어떤 수분함량에서 최소치를 보여주고 있었다. 온도의존성에 있어서 활성화 에너지는 7.7-27.4kcal/mol로 나타났고 수분함량이 높을수록 높았다. 0차반응으로 분석된 비호소적 갈변은 온도와 수분함량이 높을수록 쉽게 일어났으며 활성화에너지는 7.5-20.2kcal/mol로서 수분함량이 높을수록 높았다.

  • PDF

절연진단법을 이용한 고전압전동기 고정자권선의 절연특성분석 (Analysis of Insulation Characteristics for High-voltage Motor Stator Winding using Insulation Diagnostic Test)

  • 오봉근;강현구;김현일;임기조
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.404-405
    • /
    • 2009
  • Insulation diagnostic tests for high voltage motor stator winding were conducted to analyze the insulation characteristics. Test motors were manufactured same factory and year(1996). Insulation characteristics of moisture winding are different from those of deteriorative winding. Insulation resistance and disscipation factor test results are sensitive to moisture winding. AC current, disscipation factor tip-up and PD test results are sensitive to deteriorative winding. Also, Capacitance value for stator winding insulation material has characteristic of increasing in moisture winding.

  • PDF

Bendable 임베디드 전자모듈의 손상 메커니즘 (Failure Mechanism of Bendable Embedded Electronic Module Under Various Environment Conditions)

  • 조윤성;김아영;홍원식
    • Journal of Welding and Joining
    • /
    • 제31권5호
    • /
    • pp.59-63
    • /
    • 2013
  • A bendable electronic module has been developed for a mobile application by using a low-cost roll-to-roll manufacturing process. In flexible embedded electronic module, a thin silicon chip was embedded in a polymer-based encapsulating adhesive between flexible copper clad polyimide layers. To confirm reliability and durability of prototype bendable module, the following tests were conducted: Moisture sensitivity level, thermal shock test, high temperature & high humidity storage test, and pressure cooker tester. Those experiments to induce failure of the module due to temperature variations and moisture are the experiment to verify the reliability. Failure criterion was 20% increase in bump resistance from the initial value. The mechanism of the increase of the bump resistance was analyzed by using non-destructive X-ray analysis and scanning acoustic microscopy. During the pressure cooker test (PCT), delamination occurred at the various interfaces of the bendable embedded modules. To investigate the failure mechanism, moisture diffusion analysis was conducted to the pressure cooker's test. The hygroscopic characteristics of the encapsulating polymeric materials were experimentally determined. Analysis results have shown moisture saturation process of flexible module under high temperature/high humidity and high atmosphere conditions. Based on these results, stress factor and failure mechanism/mode of bendable embedded electronic module were obtained.

ABS Test를 이용한 아스팔트 혼합물의 수분에 의한 점착특성 평가 (Evaluation of Bond Strength Characteristic of Moisture Induced Asphalt Mixtures using ABS Test)

  • 송정탄;양성린;신오철;이석근;임정혁
    • 한국도로학회논문집
    • /
    • 제19권2호
    • /
    • pp.87-95
    • /
    • 2017
  • PURPOSES : The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength. METHODS : The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at $-10^{\circ}C$, $5^{\circ}C$, $20^{\circ}C$, $40^{\circ}C$, and $54^{\circ}C$ under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent. RESULTS AND CONCLUSIONS : Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from $5^{\circ}C$ to $40^{\circ}C$, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

보강 점성토의 워커빌리티 특성 (Workability Characteristics of Reinforced Clayey Soil)

  • 이상호;김상철;차현주
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2001년도 학술발표회 발표논문집
    • /
    • pp.370-374
    • /
    • 2001
  • This study was performed to find the basic data, as needed on the reinforced clayey soil construction work, by estimating job difficulty and optimum moisture content of the reinforced clayey soil, according to its slump test and workability test. As a result, it has been found that the more increasing reinforced clayey soil's moisture content, the higher its slump value. Its 25% moisture content: the reinforced clayey soil except the fiber reinforced soil was able to work with hand; the fiber reinforced soil with the 0.5% or 1.0% of fiber ratio was poor cohesion because of surplus quantity of fiber. Its moisture content between 30% and 35%: shoveling is somewhat difficult but troweling is possible. This study will be needed to modify and add by another.

  • PDF

금호지구 저습답의 암거배수효과에 관한 연구(I) (Studies on Wet Paddy Field Underdrainage Improvement in the Gum-Ho Area (I))

  • 김조웅;김시원
    • 한국농공학회지
    • /
    • 제22권4호
    • /
    • pp.82-95
    • /
    • 1980
  • This paper complies the results of the studies so far made on the subsoil improvement of subsurface drainage systems for wet paddy fields (those were located in the Gum-Ho area in Kyung Buk province) which had poor permeability and a high water table. In general, a drainage problem is an excess of water on the ground surface which can effect the productivity and bearing capacity of the soil. With drain pipe systems, (According to their depths and spacing) it may be possible to correct that problem. The experimentation consisted of three test plots, two of which included drain pipe systems with varing depths and width spacing of the pipes. The third plot (C) was an ordinary plot being exempt of a drain pipe system. In detail, the depth of plot A was 80 cm, and the width spacings began at 2. Om and increased by 2. Om up to 10. 0m. The depth of plot B was 60cm and the width spacing was the same as plot A. These tests were performed to research specific details; such as crop yeild, bearing capacity of the soil, the amount of underdrainage, surface cracks, root distribution, the water table level, the consumptive water depth and the soil moisture content. The test period lasted three years, from 1977 thru 1979. The results obtained were as follows: 1. During the test period, the weather conditions for the area tested were in accordance with the annual average for that area. Furthermore the precipitation factor during the spring cultivation season, the intermediate drainage period and the harvest drainage period was of optimum conditions for controling surface cracks, because of less precipitation than evaporation. 2. The difference in the level of the ground water table in plots A and B was hardly noticable, but the difference in the test plots and the ord. plot was greatly noticable. The test plots (A, B) were 30 to 40cm lower than the ordinary plot. On the whole, the ground water table of the ord. plot always stayed at a level of 15-20cm beneath the surface of the soil, the ground water table of the test plot A showed The difference in the depth of the pipe lower than the test plot B, while the test plots showed a remarkable descending effect. 3. The soil temperature in plot A was slightly core than in plot B with a difference of 0. 47$^{\circ}$C, but plot A was 1. 6$^{\circ}$C higher than the ord. plot during the flooding period, but after drainage the temperature difference climed to 2. 0$^{\circ}$C. 4. During the 3rd test year, the values of the cracks were recorded with the values of 59cm in plot A, 42cm in plot B and 15cm in the ordinary plot. Plots A and B had increased 2.5 times the value of the first year while the ordinary plot had remained the same. 5. The root weight of the rice was measured at a value of 77.2 gr. for plot A, 73.5 gr. for plot B and 65.3 gr. for the ord. plot. Therefore, the root growths in plots A and B were much more energetic than in the ord. plot. 6. The consumptive water depth measured during the 3rd year resulted in the values of 26. 0mm per day for plot A, and 24.9 mm per day for plot B, respectively. Therefore, both plot A and plot B maintained the optimum consumptive water depths, but the ordinary plot only obtained the value of 12.3 mm per day, which clearly showed less than the optimum consumptive water depth which is 20 to 30 mm/day. 7. The soil moisture content is in direct relationship to the ground water level. During drainage, test plot A decreased in its ground water level much more rapidly than the other two plots. Therefore, plot A had a much less soil moisture content. But this decreased water level could be directly effected by the weather conditions. 8. The relationship between the bearing capacity and the soil moisture content were directly inversely proportional. It can be assumed that the occurence of soil creaks is limited by the soil moisture content. Therefore, the greater the progress of the surface creaks resulted in a greater bearing capacity. So, tast plot A with a greater amount of surface cracks than the other test plots resulted in a greater bearing capacity. But, the bearing capacity at the harvest season could be effected by the drainage during the intermediate drainage period and by the weather conditions. 9. Comparing the production of the test plots to the ord. plot; there was an increased value of 840kg for plot A, 755kg for plot B and 695kg for the ord. plot in the rough rice. Therefore, plot A had an increase of 20% over the ordinary plot. The possibility of producing double crops was investigated. The effects on barley production in the test plots showed a value of 367kg per 10 acres, which substantiated the possibility of double crops because that value showed an increased value over the average yearly yield for those uplands. 10. So as a result, it can be recommended that by including a drain pipe system with the optimum conditions of an (80cm centimeter) depth and a (l0m) spacing will have a definite positive effect on the over all production capacity and quality of wetpaddy fields.

  • PDF

글리콜산을 사용한 화학적 필링이 Mice 피부 표피에 미치는 영향 (Effect of Epidermal Changes in the Mice Skin Following Glycolic Acid Peeling)

  • 이지연;이석준;장병수
    • Applied Microscopy
    • /
    • 제40권4호
    • /
    • pp.245-251
    • /
    • 2010
  • 본 연구는 15% 글리콜산과 30% 글리콜산이 포함된 각각의 필링제를 털이 제거된 mice 등쪽 피부에 처리하여 시술 전후의 피부 수분량, 유분량 및 pH를 Cutometer로 분석하였고 표피 각 질의 변화에 대한 미세구조를 더마스코프와 주사전자현미경을 사용하여 관찰하였다. 15% 글리콜산을 처리한 실험군 I과 30% 글리콜산을 처리한 실험군 II에서 피부의 수분량, 유분량 및 pH의 변화는 필링제의 농도가 높을수록 감소하는 것으로 확인되었다. Mice 피부의 표면을 더마스코프로 관찰한 결과 정상 대조군의 피부는 전반적으로 투명한 상태로 표피에서 각질이 분리되어 있거나 탈락되기 직전의 상태로 나타났다. 15% 글리콜산으로 처리한 mice 피부 표면의 각질은 많이 제거된 상태로 관찰되었으며 30% 글리콜산으로 처리한 mice 피부 표면은 매끄러운 상태로 선홍색을 띠고 있었다. Mice 피부 각질층을 인위적으로 탈락시켜서 주사전자현미경으로 관찰한 결과 정상 대조군의 각질층 표면은 각화세포 막의 함입에 의해서 불규칙하였다. 15% 글리콜산으로 처리한 mice 피부의 각질층 표면은 비교적 매끄러웠으며 노출된 각화세포의 세포질 표면은 약간의 주름이 형성되어 있었다. 30% 글리콜산으로 처리한 mice 피부에서 각질층 표면은 매끄러웠으며 이들 표면은 주름이 형성되어 있지 않았다.

벼의 함수율에 따른 도정수율의 변화 (Milled Rice Recovery Rate of Paddy with Various Moisture Contents)

  • 하유신;박경규;김혁주;홍동혁;나규동
    • Journal of Biosystems Engineering
    • /
    • 제27권2호
    • /
    • pp.125-132
    • /
    • 2002
  • In order to investigate the optimum moisture content of paddy for milling process, a series of tests were conducted by examining the recovery rate and whiteness of milled rice in relation with the various moisture content. Hwabong-byeo and Dongjin-byeo varieties which were major paddies cultivated in Korea were used for the experiment. The test was performed with small experimental milling machines. In order to minimize the unexpected factors, environment conditions were kept in constant during the experiment. As a result, the recovery rate of milled rice were varied as the changes in milling time and degree of whiteness. However, the recovery rate of milled rice increases as its moisture content increases untill a certain point of moisture content and decreases slowly afterward. This certain point can be called optimum moisture content for rice milling. Also, it has a different value depending on the variety. In this experiment, optimum moisture content of Hwabong-byeo and Dongjin-byeo were considered around 14.8% and 15.3%, respectively. It is not sure that these optimum moisture contents for the two varieties would assume the same values irrespective of harvest year and place. However, it could be concluded that the optimum moisture content for rice milling is around 15%(w.b.) for Hwabong-byeo and 15.5%(w.b.) for Dongjin-byeo, respectively.