• Korean Journal of Food Science and Technology
• /
• v.25 no.4
• /
• pp.391-394
• /
• 1993

For the automation of Tackjoo fermentation, a sensor measurable gas production during brewing and a controller were built. The performance tests were carried out at 10 litter Tackjoo fermentor, The sensor was consisted of a transparent acryl cell for bubble formation and photo-interrupter for the detection of bubbles of 0.018ml size. The fermentation controller was fabricated with a single chip microcomputer (MC68705R3) and provided with both the monitoring module of temperature measurement and the valve controling device for the cooling water circulation in coil type heat exchanger. The operation programs were developed and systemized in ROM. With this computer system, the gas production amount and rate were acquired during the Tackjoo fermentation. The fermentation curve based on the gas production rate showed a good agreement with that of alcohol concentration. The maximum rate of gas production was found after 24 hr at $30^{\circ}C$. The correlation equation between the gas production and alcohol concentration was established and used as the control algorithm of the fermentation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.4
• /
• pp.85-94
• /
• 2003

The asynchronous design methods proved to have the higher performance in power consumption and execution speed than synchronous ones because it just needs to activate the required module without feeding clock in the system. Despite the advantage of CISC machine providing the variable addressing modes and instructions, its execution scheme is hardly suited for a synchronous Pipeline architecture and incurs a lot of overhead. This paper proposes a novel asynchronous pipeline architecture, A80sl, whose instruction set is fully compatible with that of Intel 80C51, an embedded micro controller. We classify the instructions into the group keeping the same execution scheme for the asynchronous pipeline and optimize it eliminating the bubble stage that comes from the overhead of the multi-cycle execution. The new methodologies for branch and various instruction lengths are suggested to minimize the number of states required for instructions execution and to increase its parallelism. The proposed A80C51 architecture is synthesized with 0.35${\mu}{\textrm}{m}$ CMOS standard cell library. The simulation results show higher speed than that of Intel 80C51 with 36 MHz and other asynchronous counterparts by 24 times.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1082-1088
• /
• 2005

Generating fast round key in AES Rijndael algorithm using three key sizes, such as 128, 192, and 256-bit keys is a critical factor to develop high throughput AES processors. In this paper, we propose on-the-fly round key generator which is applicable to the pipelined and non-pipelined AES processor in which cipher and decipher nodes must be implemented on a chip. The proposed round key generator has modular and area-and-time efficient structure implemented with simple connection of two key expander modules, such as key_exp_m and key_exp_s module. The round key generator for non-pipelined AES processor with support of three key lengths and cipher/decipher modes has about 7.8-ns delay time under 0.25um 2.5V CMOS standard cell library and consists of about 17,700 gates.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.35.1-35.1
• /
• 2010

The Cu(In,Ga)Se2(CIGS) thin film solar cells have been achieved until almost 20% efficiency by NREL. These solar cells include chemically deposited CdS as buffer layer between CIGS absorber layer and ZnO window layer. Although CIGS solar cells with CdS buffer layer show excellent performance, many groups made hard efforts to overcome its disadvantages in terms of high absorption of short wavelength, Cd hazardous element. Among Cd-free candidate materials, the CIGS thin film solar cells with Zn compound buffer layer seem to be promising with 15.2%(module by showa shell K.K.), 18.6%(small area by NREL). However, few groups were successful to report high-efficiency CIGS solar cells with Zn compound buffer layer, compared to be known how to fabricate these solar cells. Each group's chemical bah deposition (CBD) condition is seriously different. It may mean that it is not fully understood to grow high quality Zn compound thin film on the CIGS using CBD. In this study, we focused to clarify growth mechanism of chemically deposited Zn compound thin film on the CIGS, especially. Additionally, we tried to characterize junction properties with unfavorable issues, that is, slow growth rate, imperfect film coverage and minimize these issues. Early works reported that film deposition rate increased with reagent concentration and film covered whole rough CIGS surface. But they did not mention well how film growth of zinc compound evolves homogeneously or heterogeneously and what kinds of defects exist within film that can cause low solar performance. We observed sufficient correlation between growth quality and concentration of NH3 as complex agent. When NH3 concentration increased, thickness of zinc compound increased with dominant heterogeneous growth for high quality film. But the large amounts of NH3 in the solution made many particles of zinc hydroxide due to hydroxide ions. The zinc hydroxides bonded weakly to the CIGS surface have been removed at rinsing after CBD.

• Journal of Power Electronics
• /
• v.13 no.4
• /
• pp.516-527
• /
• 2013

This paper presents a new overall system for state-of-available-power (SoAP) prediction for a lithium-ion battery pack. The essential part of this method is based on an adaptive network architecture which utilizes both fuzzy model (FIS) and artificial neural network (ANN) into the framework of adaptive neuro-fuzzy inference system (ANFIS). While battery aging proceeds, the system is capable of delivering accurate power prediction not only for room temperature, but also at lower temperatures at which power prediction is most challenging. Due to design property of ANN, the network parameters are adapted on-line to the current battery states (state-of-charge (SoC), state-of-health (SoH), temperature). SoC is required as an input parameter to SoAP module and high accuracy is crucial for a reliable on-line adaptation. Therefore, a reasonable way to determine the battery state variables is proposed applying a combination of several partly different algorithms. Among other SoC boundary estimation methods, robust extended Kalman filter (REKF) for recalibration of amp hour counters was implemented. ANFIS then achieves the SoAP estimation by means of time forward voltage prognosis (TFVP) before a power pulse occurs. The trade-off between computational cost of batch-learning and accuracy during on-line adaptation was optimized resulting in a real-time system with TFVP absolute error less than 1%. The verification was performed on a software-in-the-loop test bench setup using a 53 Ah lithium-ion cell.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.65-79
• /
• 2003

In this study GIS based pre- and post-processing tool for the Visual MODFLOW that is specific software to model groundwater flow is developed. This tool not only makes input data scientifically but also manages input and output data in terms of the groundwater flow analysis. In addition it can storage project products systematically into Oracle database. The most characteristic figure of this processing tool is to provide the module, which automatically or semi automatically develops various grid cell sizes using GIS ArcView and also produces DXF files reflecting various boundary conditions in the modeling zone. In particular, eminences of this research are to create 3 dimensional hydrogeological structures with 2 dimensional GIS ArcView and to conduct pre- and post- processing along with same topology and data format of the MODFLOW.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.117-123
• /
• 2008

In this paper, we develop MPEG-4 AAC streaming player on embedded Linux processor such as mobile terminals. Moreover we show the experimental results that the player preforms the decoding processes of MPEG-4 AAC data effectively. MPEG-4 AAC technology supports a wide range encoding rates and high sound quality so it is appropriate to adopt various applications. In particular, the need in the development of the application of audio data increases according to significantly increase in devices used in mobile environments, such as cell phones and PDAs. In this environment, it is necessary to optimize the decoding processes to the ability of the terminal hardware in order to play audio data without delays. We also implement the decoding module to optimize the processor capabilities and make the player to decode and play streaming audio data from streaming server.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.57.2-57.2
• /
• 2011

Dye-sensitized solar cells (DSSC) have recently been developed as a cost-effective photovoltaic system due to their low-cost materials and facile processing. The production of DSSC involves chemical and thermal processes but no vacuum is involved. Therefore, DSSC can be fabricated without using expensive equipment. The use of dyes and nanocrystalline $TiO_2$ is one of the most promising approaches to realize both high performance and low cost. The efficiency of the DSSC changes consequently in the particle size, morphology, crystallization and surface state of the $TiO_2$. Nanocrystalline $TiO_2$ materials have been widely used as a photo catalyst and an electron collector in DSSC. Front electrode in DSSC are required to have an extremely high porosity and surface area such that the dyes can be sufficiently adsorbed and be electronically interconnected, resulting in the efficient generation of photocurrent within cells. In this study, DSSC were fabricated by an screen printing for the $TiO_2$ thin film. $TiO_2$ nanoparticles characterized by X-ray diffractometer (XRD) and scanning electron microscope (SEM) and scanning auger microscopy (SAM) and zeta potential and electrochemical impedance spectroscopy(EIS).In addition, DSSC module was modeled and simulated using the SILVACO TCAD software program. Improve the efficiency of DSSC, the effect of $TiO_2$ thin film thickness and $TiO_2$ nanoparticle size was investigated by SILVACO TCAD software program.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1172-1176
• /
• 2008

In this paper, we describe the implementation and performance of a dual-mode Software Define Radio (SDR) smart antenna base station system. SDR technology enables a communication system to be reconfigured through software downloads to the flexible hardware platform that is implemented using programmable devices such as Digital Signal Processors (DSPs), Field Programmable Gate Arrays (FPGAs), and microprocessors. The presented base station channel card comprises the physical layer (pHY) including the baseband modem as well as the beamforming module. This channel card is designed to support TDD High-Speed Downlink Packet Access (HSDPA) as well as Wireless Broadband Portable Internet (WiBro) utilizing the SDR technology. We first describe the operations and functions required in WiBro and TDD HSDPA. Then, we explain the channel card design procedure and hardware implementation. Finally, we evaluate WiBro and TDD HSDPA performance by simulation and actual channel-card-based processing. Our smart antenna base-station dual-mode channel card shows flexibility and tremendous performance gains in terms of communication capacity and cell coverage.

• Molecules and Cells
• /
• v.41 no.9
• /
• pp.842-852
• /
• 2018

Notch signaling is an evolutionarily conserved pathway and involves in the regulation of various cellular and developmental processes. Ligand binding releases the intracellular domain of Notch receptor (NICD), which interacts with DNA-bound CSL [CBF1/Su(H)/Lag-1] to activate transcription of target genes. In the absence of NICD binding, CSL down-regulates target gene expression through the recruitment of various corepressor proteins including SMRT/NCoR (silencing mediator of retinoid and thyroid receptors/nuclear receptor corepressor), SHARP (SMRT/HDAC1-associated repressor protein), and KyoT2. Structural and functional studies revealed the molecular basis of these interactions, in which NICD coactivator and corepressor proteins competitively bind to ${\beta}-trefoil$ domain (BTD) of CSL using a conserved ${\varphi}W{\varphi}P$ motif (${\varphi}$ denotes any hydrophobic residues). To date, there are conflicting ideas regarding the molecular mechanism of SMRT-mediated repression of CSL as to whether CSL-SMRT interaction is direct or indirect (via the bridge factor SHARP). To solve this issue, we mapped the CSL-binding region of SMRT and employed a 'one- plus two-hybrid system' to obtain CSL interaction-defective mutants for this region. We identified the CSL-interaction module of SMRT (CIMS; amino acid 1816-1846) as the molecular determinant of its direct interaction with CSL. Notably, CIMS contains a canonical ${\varphi}W{\varphi}P$ sequence (APIWRP, amino acids 1832-1837) and directly interacts with CSL-BTD in a mode similar to other BTD-binding corepressors. Finally, we showed that CSL-interaction motif, rather than SHARP-interaction motif, of SMRT is involved in transcriptional repression of NICD in a cell-based assay. These results strongly suggest that SMRT participates in CSL-mediated repression via direct binding to CSL.