• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.12
• /
• pp.90-96
• /
• 1996

Optical conditions of a reflective multicolor STM-LCD based on the electrical control of birefrignece are analyzed on the CIE chromaticity diagram. The luminance and the area of the locus on the cIE chromaticity diagram are the two factors to be considered in the design of an LC cell to display white, red, green, and blue. The characteristics of a test cell agrees well with numerical simulation. A completed 320$\times$240 module is addressed by a designed PWM driving circuit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.83-86
• /
• 2011

최근 에너지/환경의 문제로 HEV(Hybrid Electric Vehicle)이 대두되고 있는데, HEV를 위한 대표적인 기술로서 제동시 에너지로 발전하여 전기를 회수하는 회생제동이 있다. 회생제동기술은 HEV 뿐만 아니라 건설기기, 하이브리드 버스, 전철, 엘리베이터 등에 폭넓게 활용이 가능하다. 회생제동용 에너지 저장원으로서는 고출력 및 환경특성이 우수한 슈퍼캐패시터가 적합하며, 단일 셀이 아닌 수십 ~ 수백 개의 셀이 모듈로 사용되는 만큼, 모듈화 설계 기술이 필요 하다. 수백 개의 셀을 모듈화하기 위해서 개별 셀의 전압을 모니터링 하는 기술과 충방전 시 밸렌싱 하는 기술, 사용환경에 따라 열 관리 기술이 필요하며, 이들 기능을 수행할 수 있는 통합 시스템을 구비하여 안정성과 성능 향상을 하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.266-269
• /
• 2003

TFT LCD mode has some well-documented performance limitations, namely limited viewing angle, inversion of the gray scale levels and poor luminance efficiency because of the necessity of using crossed polarisers attached to the display cell. During the last few years many initiatives have been undertaken to solve these problems by incorporation birefringent films of various designs into the LCD module. Controlling the optical performance of LCDs often requires combination of liquid crystal material properties, cell parameters and optical films. Such optical films have traditionally been made with stretched polymer materials such as polycarbonate, but recently coated liquid crystalline materials have been used to give improved optical films which can greatly enhance the performance of LCDs. We have now developed reactive mesogen materials to add ultra-thin optical layers into the display structure, and these allow the potential for many new applications.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.505-507
• /
• 2005

In this paper, a timing analysis is performed for the CAN-based simulator system for a fuel cell hybrid electric vehicles. The CAN protocol is recently being used for conventional vehicles, however, the network-induced delay can make the in-vehicle network system unstable. This problem may be occurred in the future vehicles because more ECUs are being required than recent vehicles. In order to develop a stable network-based control system, timing analysis is required at the design process. Throughout this analysis, timing parameters that affect transmission delay are examined and an effective method of predicting a sampling time for a stable communication via CAN protocol. In order to show the validityof suggested timing analysis. some experiments are performed using DSPs with CAN module.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.821-825
• /
• 1991

This paper presents an architecture and control logic of a Flexible Manufacturing Cell (FMC) which is one of the important elements under Computer Integrated Manufacturing (CIM) environment. To implement FMC, it is very important to develop a software which can control and monitor the overall system in an integrated environment. Our primary concern in this research is not to develop individual systems, but to integrate them in the hierarchical control level. Progress on the research of integrating CAD/CAM, Process Planning, Off-line Robot Programming and Simulation module into FMC control system is reported. FMC hardware system used here has an Automated Storage & Retrieval System (AS/RS), a conveyor system, a transfer robot, a CNC milling machine, a bar-code system, and an IBM PC/AT as Cell Control System (CCS). In order to demonstrate the operational result, the name plates, text-carved aluminium plates, are manufactured by this system.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.383-389
• /
• 2017

A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1132-1133
• /
• 2008

Amid the booming research on new and renewable energy, the photovoltaic(PV) industry has been growing around the PV advanced countries such as Japan, Germany, Europe and USA. In recent years, China became a strong performer in the world PV market share, increasing solar cell production rapidly. Both world solar cell and module production and installation rose steadily in 2007 like recent bumper years. In 2007, the PV industry produced 4.28GW and the installations reached a record high of 2.83GW, representing growth of 60percent over the previous year.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.167-169
• /
• 2008

A 1.2KW Proton Exchange Membrane Fuel Cell(PEMFC) stack(Nexa Power Module) is installed to motor driven general scooter. The 24V, 650W BLDC motor is used for actuator and 2nd battery(24V, 4Ah) is used for stable starting of this motor. The operating information of Nexa Power Nodule is transmitted by RS-232 serial communication to notebook PC, and that data is analysed and displayed by the LabVIEW monitoring system.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1034-1036
• /
• 2006

In this paper, I used microprocessor and sensor and designed to improve the efficiency of the photovoltaic system the photovoltaic position tracker device, and compared the normal photovoltaic system of fixed form with the photovoltaic system of solar position tracked form. Moreover, compared the catalogue of solar cell module and the simulation through a mathematics modelling with the solar cell's characteristic interpreting and, composed an power conversion system with boost converter and voltage source inverter. Used the constant voltage control method for maximum power point tracking in boost converter control and, used the SPWM(Sinusoidal Pulse Width Modulation) control method in inverter control.

• Journal of Information Technology Services
• /
• v.9 no.4
• /
• pp.207-217
• /
• 2010

This paper is concerned with a protection system for the mentally handicapped, which is utilizing a GPS receiver and mobile communications. The protection system consists of a location notification equipment, a location identification and management server, and a cell phone of guardian. The location notification equipment is made up of a GPS receiver, a CDMA communication module and a microprocessor. The equipment transfers the location of the mentally impaired to the location identification and management server when the handicapped gets out of a certain bound of the designated facility. The server marks the handicapped's location on the map in the server and also notifies the guardian's cell phone of the locations. With applying the proposed protection system to social welfare organizations related to the mentally handicapped, it is expected to efficiently contribute to the promotion of the handicapped's welfare.