• Journal of KIBIM
• /
• v.8 no.1
• /
• pp.56-62
• /
• 2018

There exists no precedented case of quantity take-off, using parametric modeling, from BIM-based irregular structures. Civil 3D provides earthwork quantity take-off based on surface modeling. Generally, designers should enter data into the specification additionally after extracting quantity estimation from earthwork modeling design. The objective of this report is to suggest the method from quantity take-off to specification of BIM-based earthwork quantities. We intend to investigate earthwork take-off method by Civil3D and explain why parametric information extraction is required for quantity estimation and specification and how information of earthwork quantity based on solid and surface modeling is connected to open quantity take-off module. It is highly expected that this suggestion would be the practical methodology of earthwork quantity take-off and specification in the field of civil engineering.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.145-147
• /
• 2009

This research measures EEG signals which are generating on head skin and extracts brain concentration level related with brain activity. We have developed concentration wireless transmission system by displaying this EEG signal on PDA mobile device. The front head was used for measuring EEG signal and INA128 with TL084 and analog elements was used for measuring EEG signal, amplifying and filtering the signal. Measured analog EEG signals changed into digital signals by using ADC of PIC24FJ192 with 10bit resolution and 500Ks/s sampling rate. So The changed digital signals have transmitted to the PDA by using bluetooth. LabView 8.5 was also used for FFT transformation, frequency and spectrum analysis of the transferred EEG signal. As a result, $\alpha$ wave, $\beta$ wave, $\theta$ wave and $\delta$ wave were classified. we extracted the concentration index by adapting concentration extraction algorithm. This concentration index was transferred into PDA by wireless module and displaying.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.7-12
• /
• 2010

We have developed a SPICE compatible model of thermoelectric devices, and a parameter extracting technique only by electrical and temperature measurement by using Harman method was proposed. The proposed model and parameter extraction technique do not require experimental data from thermal conductivity measurements. The maximum error between extracted parameters extracted by proposed method and conventional method was about 14%, which is not a severe mismatch for real application. The proposed model is applicable to design of both for thermoelectric coolers and thermo electric generators.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.3
• /
• pp.203-211
• /
• 2014

To raise the industrial competitiveness in the field of ship-building, it is crucially important that the yard should use production facilities and working space effectively. Among the related works, the management of tremendous blocks' number, the limited area of assembly shops and inefficient personnel and facility management still need to be improved in terms of being exposed to a lot of problems. To settle down these conundrums, the various strategies of block arrangement on the assembly floors have been recently presented and in the results, have increasingly began to be utilized in practice. However, it is a wonder that the sampled or approximated block shapes which usually are standardized projections or the geometrically convex contour only have been prevailed until now. In this study, all parts including the panel, stiffeners, outer shells, and all kinds of outfitting equipment are first extracted using the Volume Primitive plug-in module from the ship customized CAD system and then, the presented system constructs a simpler and more compact ship data structure and finally generates the novel projected contours for the block arrangement system using the adaptive concave hull algorithm.

• Speech Sciences
• /
• v.15 no.2
• /
• pp.67-77
• /
• 2008

In this paper, we implemented a robust speech recognizer using the TMS320VC33 DSP. For this implementation, we had built speech and noise database suitable for the recognizer using spectral subtraction method for noise removal. The recognizer has an explicit structure in aspect that a speech signal is enhanced through spectral subtraction before endpoints detection and feature extraction. This helps make the operation of the recognizer clear and build HMM models which give minimum model-mismatch. Since the recognizer was developed for the purpose of controlling car facilities and voice dialing, it has two recognition engines, speaker independent one for controlling car facilities and speaker dependent one for voice dialing. We adopted a conventional DTW algorithm for the latter and a continuous HMM for the former. Though various off-line recognition test, we made a selection of optimal conditions of several recognition parameters for a resource-limited embedded recognizer, which led to HMM models of the three mixtures per state. The car noise added speech database is enhanced using spectral subtraction before HMM parameter estimation for reducing model-mismatch caused by nonlinear distortion from spectral subtraction. The hardware module developed includes a microcontroller for host interface which processes the protocol between the DSP and a host.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.6
• /
• pp.531-538
• /
• 2016

In this paper, we design and fabricate a short range FMCW radar which detects and tracks a moving target in a two-dimensional domain using dual transceiver modules. For the short range radar, we propose a scheme for alternate extraction of the two-dimensional positions using one-dimensional range information from time division transceiver modules, and successfully apply the scheme to the two-dimensional short range radar. Measured results of the targets at 10 m and 30 m are presented as performance demonstration of each transceiver module. Also the performance of the two-dimensional radar is demonstrated using a two-dimensional target map, which uses the range bin corresponding to the frequency resolution, and the effectiveness of the proposed scheme is validated.

• KIISE Transactions on Computing Practices
• /
• v.21 no.2
• /
• pp.144-147
• /
• 2015

Question Answering (QA) services can provide exact answers to user questions written in natural language form. This research focuses on how to build a QA system for a specific domain area. Online and offline QA system architecture of targeted domain such as domain detection, question analysis, reasoning, information retrieval, filtering, answer extraction, re-ranking, and answer generation, as well as data preparation are presented herein. Test results with an official Frequently Asked Question (FAQ) set showed 68% accuracy of the top 1 and 77% accuracy of the top 5. The contribution of each part such as question analysis system, document search engine, knowledge graph engine and re-ranking module for achieving the final answer are also presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.605-612
• /
• 2015

Three dimensional (3D) position determination and motion recognition using a 3D depth sensor camera are applied to a developed penguin-shaped robot, and its validity and closeness are investigated. The robot is equipped with an Asus Xtion Pro Live as a 3D depth camera, and a sound module. Using the skeleton information from the motion recognition data extracted from the camera, the robot is controlled so as to follow the typical three mode-reactions formed by the operator's gestures. In this study, the extraction of skeleton joint information using the 3D depth camera is introduced, and the tracking performance of the operator's motions is explained.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.5161-5178
• /
• 2019

Correlation Filter was recently demonstrated to have good characteristics in the field of video object tracking. The advantages of Correlation Filter based trackers are reflected in the high accuracy and robustness it provides while maintaining a high speed. However, there are still some necessary improvements that should be made. First, most trackers cannot handle multi-scale problems. To solve this problem, our algorithm combines position estimation with scale estimation. The difference from the traditional method in regard to the scale estimation is that, the proposed method can track the scale of the object more quickly and effective. Additionally, in the feature extraction module, the feature representation of traditional algorithms is relatively simple, and furthermore, the tracking performance is easily affected in complex scenarios. In this paper, we design a novel and powerful feature that can significantly improve the tracking performance. Finally, traditional trackers often suffer from model drift, which is caused by occlusion and other complex scenarios. We introduce a relocation component to detect object at other locations such as the secondary peak of the response map. It partly alleviates the model drift problem.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2012

Recently, due to the advanced computer technology, momental architectures have been designed and built using features that are very sophisticated. People's interest in free-form structural system has increased steadily not only nationwide, but also worldwide. However, there were many difficulties in the materialization of free-form structural system owing to the lack of technique and research. To solve this problem, this study performs the interface between the 3D modeling program and the optimization program. In the 3D modeling program, it is possible to automatic mesh generation and immediately to information extraction. It performs the shape optimization. Consequently, this research designs the example model and performs optimization in order to verify the developed interface module.