• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.177-183
• /
• 2002

Current state-of-the-art of VMS control is based upon simple knowledge-based inference engine with message set and each message's priority. And R&Ds of the VMS control are focused on the accurate detection and estimation of traffic condition of the subject roadways. However VMS display itself cannot achieve a desirable traffic allocation among alternative routes in the network In this context, VMS display strategy is the most crucial part in the VMS control. VMS itself has several limitations in its nature. It is generally known that VMS causes overreaction and concentration problems, which may be more serious in urban network than highway network because diversion should be more easily made in urban network. A feedback control algorithm is proposed in this paper to address the above-mentioned issues. It is generally true that feedback control approach requires low computational effort and is less sensitive to models inaccuracy and disturbance uncertainties. Major features of the proposed algorithm are as follows: Firstly, a regulator is designed to attain system optimal traffic allocation among alternative routes for each VMS in the network. Secondly, strategic messages should be prepared to realize the desirable traffic allocation, that is, output of the above regulator. VMS display strategy module is designed in this context. To evaluate Probable control benefit and to detect logical errors of the Proposed feedback algorithm, a offline simulation test is performed using real network in Daejon, Korea.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.1
• /
• pp.115-119
• /
• 2010

As the subjects of education has been changed from the instructors to learners, a web-based self-directed learning which can accelerate the initiative of learners and can be free from the restriction of time and space has been received attention. In this paper, the web-based self-directed learning system was designed. For the design, to make the learners build their own lecture plan, the service was designed to provide three kinds of lectures of video clip, slide lecture, and e-text lecture that were focused on various lecture contents. In addition, a learner and an assistant was man to man matched to enable the on-line mentoring for mutual communication between learners and assistants. Implementation was carried out by three sets of module - Manager, Learner and Assistant - that were applied to the real educational activities. The survey on satisfaction for the education, efficiency of ability improvement, and educational intelligibility for the attendants on the education showed more than 67.2% of satisfaction in satisfaction for the education. Furthermore, more than 86.9% of attendants replied that their ability were improved after the education of this system. The educational system realized in this paper shows effectiveness for the self-directed learning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.93-100
• /
• 2017

The purpose of this study was to develop a simulation-based practice that enhances the core competencies of nursing students and to investigate the effects on critical thinking disposition, communication skill, and clinical performance for nursing students. This study used a one group, pre-post test design. There were 53 nursing students from G city enrolled in this study, and self-reported questionnaires were collected between June 10 and August 19, 2016. The simulation-based practice was applied for 6-8 hours/day for 60 hours, using a 4-practice module. The data were analyzed by frequencies, paired t-test, and Pearson's correlation using SPSS Win 18.0. The results showed that there was a significant difference in the clinical performance, however, there was no significant difference in the critical thinking disposition and communication skill. After the simulation-based practice, clinical performance was found to be positively correlated with critical thinking disposition (r= .628, p<.001) and communication (r=.716, p<.001). Critical thinking disposition and communication (r=.650, p<.001) also showed a positive correlation. In order to improve clinical competence, it is necessary to develop a simulation-based practice that enhances critical thinking disposition and communication skill.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.111-118
• /
• 2016

This paper presents an X-band (9.375 GHz) $1{\times}2$ array microstrip antenna which is capable of active beam compensation for installation of an unmanned aerial vehicle (UAV). First of all, a basic $1{\times}2$ array microstrip antenna incorporated with wilkinson power divider was designed and performance of the array antenna was verified. Next, to verify beam steering performance of the designed array microstrip antenna, we fabricated a phase shifter, and the wilkinson power divider as module structure and measured characteristics of beam steering according to phase shifting. The main lobe is 0.6 dBi at $0^{\circ}$, and the side lobe decreased 18.8 dB. The reliable radiation pattern was achieved. Finally, an active beam steering microstrip array antenna attached with the phase shifter and the power divider on the back side of the antenna was designed and fabricated to install wing of UAV for compactness. The maximum gain is 0.1 dBi. Therefore, we obtained a basic antenna technology for compensating beam error according to wing deformation of an UAV installed array antennas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.11
• /
• pp.66-76
• /
• 2009

The motion estimation in video encoding system occupies the biggest part. So, we require the motion estimator with efficient structure for real-time operation. And for motion estimator's implementation, it is desired to design hardware module of an exclusive use that perform the encoding process at high speed. This paper proposes motion estimation detection block(MED), 41 SADs(Sum of Absolute Difference) calculation block, minimum SAD calculation and motion vector generation block based on parallel processing. The parallel processing can reduce effectively the amount of the operation. The minimum SAD calculation and MED block uses the pre-computation technique for reducing switching activity of the input signal. It results in high-speed operation. The MED and 41 SADs calculation blocks are composed of adder tree which causes the problem of critical path. So, the structure of adder tree has changed the most commonly used ripple carry adder(RCA) with carry skip adder(CSA). It enables adder tree to operate at high speed. In addition, as we enabled to easily control key variables such as control signal of search range from the outside, the efficiency of hardware structure increased. Simulation and FPGA verification results show that the delay of MED block generating the critical path at the motion estimator is reduced about 19.89% than the conventional strukcture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1899-1909
• /
• 2007

A cross-coupled charge pump with internal pumping capacitor, witch is advantages from a point of minimizing TFT-LCD driver IC module, is newly proposed in this paper. By using a NMOS and a PMOS diode connected to boosting node from VIN node, the pumping node is precharged to the same value each pumping node at start pumping operation. Since the lust-stage charge pump is designed differently from the other stage pumps, a back current of pumped charge from charge pumping node to input stage is prevented. As a pumping clock driver is located the font side of pumping capacitor, the driving capacity is improved by reducing a voltage drop of the pumping clock line from parasitic resistor. Finally, a layout area is decreased more compared with conventional cross-coupled charge pump by using a stack-MIM capacitors. A proposed charge pump for TFT-LCD driver IC is designed with $0.13{\mu}m$ triple-well DDI process, fabricated, and tested.

• Korean Journal of Remote Sensing
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2007

In KORDI (Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI (Geostationary Ocean Color Imager) instrument which is loaded on COMS (Communication, Ocean and Meteorological Satellite); it will be launched in 2008. Ansan (the headquarter of KORDI) has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified into antenna and RF. Antenna is designed to be $\phi$ 9m cassegrain antenna which has 19.35 G/T$(dB/^{\circ}K)$ at 1.67GHz. RF module is divided into LNA (low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem. The existing building is re-designed and arranged for the KOSC operation concept; computing room, board of electricity, data processing room, operation room. Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet. and it is also being considered constructing outer data distribution system as a web hosting service for offering received data to user less than an hour.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.395-405
• /
• 2018

Seakeeping safety module in Korean e-Navigation system is one of the ship remote monitoring services that is employed to ensure the safety of ships by monitoring the ship's real time performance and providing a warning in advance when the abnormal conditions are encountered in seakeeping performance. In general, seakeeping performance has been evaluated by simulating ship motion analysis under specific conditions for its design. However, due to restriction of computation time, it is not realistic to perform simulations to evaluate seakeeping performance under real-time operation conditions. This study aims to introduce a reasonable and faster method to predict a ship's roll motion which is one of the factors used to evaluate a ship's seakeeping performance by using a machine learning-based surrogate model. Through the application of various learning techniques and sampling conditions on training data, it was observed that the difference of roll motion between a given surrogate model and motion analysis was within 1%. Therefore, it can be concluded that this method can be useful to evaluate the seakeeping performance of a ship in real-time operation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.56-69
• /
• 2021

In this paper, the PV system with a link to the commercial system needs some advantages like small capacity, high power factor, high reliability, low harmonic output, maximum power operation of solar cell, and low cost, etc. as well as the properties of inverter. To transfer the PV energy of photovoltaic power generation system to the system and load, it requires PCS in both directions. The purpose of this paper is to confirm the stable power supply through the load leveling by presenting the PCS considering ESS of photovoltaic power generation. In order to achieve these purpose, 5 step process of operation mode algorithm were used according to the solar insolation amount and load capacity and the controller for charging/ discharging control was designed. For bidirectional and effective energy transfer, the bidirectional converter and battery at DC-link stage were connected and the DC-link voltage and inverter output voltage through the interactive inverter were controlled. In order to prove the validity of the suggested system, the simulation using PSIM was performed and were reviewed for its validity and stability. The 3[kW] PCS was manufactured and its test was conducted in order to check this situation. In addition, the system characteristics suggested through the test results was verified and the PCS system presented in this study was excellent and stronger than that of before system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.496-502
• /
• 2020

The electronic attendance management system is being introduced and operated on a pilot basis by some universities and educational institutions. However, most of the related systems have installed and operated the existing barcode and magnetic card systems. Classroom attendance is managed by introducing RF cards, but it causes problems such as recognition distance (less than 5cm) and the need for a check process in which students have to read the card each time with a reader for attendance. Also, it is not possible to respond in real time to the situation of midterm (early leave, absence from the second lecture time, etc.) because it is used in the lecture time of one subject with the record checked once. In order to solve these problems, the various mobile attendance systems proposed to solve these problems are also unable to fundamentally solve problems such as interim attendance and proxy attendance because they check attendance using only the application of a smartphone. In this paper, we use geofencing technology, which is a positioning-based technology that detects the entry and exit of people, objects, etc. in areas separated by virtual boundaries. The proposed system solves the problem of intermediate attendance and alternate attendance by setting the student to automatically record the access record when entering and leaving the classroom set as a geofence with a smartphone. In addition, it also provides a function to prevent unintentional mistakes that occur through the smartphone by limiting some of the functions of the smartphone such as silence, vibration, and Internet use when entering the classroom.