• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.9
• /
• pp.5652-5659
• /
• 2014

The purpose of this study was to introduce a software task processing evaluation model that considers the following situations: i) a software system is integratedly composed of several number of modules, ii) each modules has its corresponding module task, iii) all module tasks are tested simultaneously, and iv) the processing times of the module tasks are mutually dependent. The software task completion probability with the module dependency was derived using the joint distribution function of Farlie [11]. The results showed that the task completion probability of software increases with increasing module dependency parameter.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.171-181
• /
• 1988

In this study, a packet voice/data terminal(PVDT) that services both voice and data in the packet-switched network is implemented. The software structure of the PVDT is designed according to the OSI 7 layer architecture. The discrimination of voice and data is made in the link layer. Voice packets have priority over data packets in order to minimize the transmission delay, and are serviced by a simple protocol so that the overhead arising form the retransmission of packets may be minimized. The hardware structure of the PVDT is divided into five modules; a master control module, a speech proessing module, a speech activity detection module, a telephone interface module, and an input/output interface module. In addition to the hardware implementation, the optimal reconstruction delay of voice packets to reduce the influence of delay variance is analyzed.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.1022-1030
• /
• 2002

The experiments were performed with a $31{\times}31{\times}7mm^3$ simulated 3-dimensional module on the thermal conductive board of a parallel plate channel. The convective thermal conductance for the path from the module surface directly to airflow and conjugate thermal conductance for the path leading from the module to the floor by way of a module support, then, to the airflow were determined with several combinations of module-support-construction(210, 0.32, 0.021 K/W)/floor-material(398, 0.236W/mK) and channel height(15-30mm). As the result, it was found that the conjugate thermal conductance and the temperature distribution around the module depend on the thermal resistance of the module support, and the channel height. These configurations were designed to investigate on the feasibility of using the substrate as an effective heat spreader in the forced convective air-cooling of surface mounted heat source. The experimental results were discussed in the light of interactive nature of heat transfer through two paths, one directed from the module to the airflow and the other via the module support and the floor to the air.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.104-109
• /
• 2009

If the Photovoltaic(PV) Module should get physical load, the PV module will be warped according to elongation of the front glass and then micro-crack will be occurred in the heat sealed Solar Cell. This micro-crack drops output of the short circuit current and the open circuit voltage of the PV Module. This is because of increase of resistance component by micro-crack. Micro-crack at specific Solar Cell in the module reduces the durability of PV Module such as less output, Hot-Spot in the PV module caused by Solar Cell output mismatch, heat generating as resistance component caused by micro-crack. In this study, among some factors which effect to the output of crystalline PV Module, we will see how the micro-crack caused by mechanical stress effects to the electrical output of PV Module.

• Membrane Journal
• /
• v.7 no.2
• /
• pp.95-109
• /
• 1997

The effects of varing axial flow rate and solute concentration on the performance of both module sets made by different methods for active layer formation were compared and determined. All experiments were conducted simultaneously at the same transmembrane pressure and energy consumption per membrane area. In every comparative run between the presence of Dean vortices in a helical module and absence of such vortices in a linear module from the first module set, the solution fluxes and permeabilities were higher, and in some cases substantially higher for the vortex flow. With pure water, the permeabilities of both modules from the second module set were different and the flux in a linear module was 150% higher than in the helical module. This explained both module membranes were totally different.

• Journal of Biomedical Engineering Research
• /
• v.26 no.1
• /
• pp.49-54
• /
• 2005

This paper presents a design of 1-channel active dry electrode module for EEG from one's forehead. The IA(instrumentation amplifier) circuit inside the module is based on the configuration sown on the paper MettingVanRijn et al. We analyze the IA circuit to find out the related equation, and then compare its simulated characteristic with the result obtained from the real active dry electrode circuit. With the active dry electrode and the wet(Ag/AgCI) electrode connected to the separated analog processing module on one's forehead at the same time, their real time and FFT outputs of EEG are examined for comparison. The active dry electrode module has advantages over the wet electrode and its analog processing module: 1) The size of the analog processing circuit of the active dry electrode module is smaller than that of existing EEG analog processing module; 2) the total cost required to make the proposed analog processing circuit is much lower than that of the existing circuit, since the designed circuit needs smaller parts; 3) the electrical characteristic is comparable to the general EEG analog processing module even if the designed module has simpler circuit configuration.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.45-48
• /
• 2000

In this paper, we designed bluetooth module using 2.4 GHz ISM band. Bluetooth is wireless networking solution that connects PDA, cellular phone, printer, PC, etc each other. We integrated digital and RF part in one module. As a result, we can make low power consumption module that enables long battery life. In addition, we enlarged maximum available range of our module from 10m to l00m. This module satisfies bluetooth specification 1.0.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.591-596
• /
• 2007

본 연구에서는 상황 추론의 기능을 추천 시스템에 접목하였다. 연구의 대상 영역은 음악 추천 분야인데, 본 연구에서 제안하는 시스템은 세 개의 모듈, 즉 Intention Module, Mood Module 그리고 Recommendation Module로 구성되어 있다. Intention Module은 사용자가 음악을 청취할 의향이 있는지 없는지를 외부 환경의 상황 데이터를 이용하여 추론한다. Mood Module은 사용자의 상황에 적합한 음악의 장르를 추론한다. 마지막으로 Recommendation Module은 사용자에게 선정된 장르의 음악을 추천한다.

• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.48-48
• /
• 2004

국제우주정거장 (International Space Station; ISS) 프로그램을 통하여 미국을 비롯한 15개 참여 국가들은 우주공간의 과학 연구 및 산업적 활용을 위한 전초기지를 만들어 나가고 있다. ISS에는 미세중력 (Microgravity) 환경을 이용하여 각종 실험을 수행하기 위한 공간으로 총 6개의 가압모듈 (Pressurized Module; PM)이 설치되었거나 설치될 예정이다. 현재 설치되어 있는 PM으로는 2001년 2월 ISS에 부착된 미국 NASA의 Destiny 실험모듈이 있으며, 향후 미국의 Centrifuge Accommodation Module (CAM), 일본의 Japanese Experiment Module- Pressurized Module (JEM-PM), 유럽연합의 Columbus Module, 러시아의 Research Module 등이 설치될 예정이다. (중략)

• Bulletin of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.33-43
• /
• 1998

Matlis posed the following question in 1958: if N is a direct summand of a direct sum M of indecomposable injectives, then is N itself a direct sum of indecomposable innjectives\ulcorner It will be proved that the Matlis problem has an affirmative answer when M is a multiplication module, and that a weaker condition then that of M being a multiplication module can be given to module M when M is a countable direct sum of indecomposable injectives.