• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.615-624
• /
• 1992

For the operation of the resonant DC link inverters, only limited number of modulation techniques such as the delta modulation and instantaneous current control techniques have been suggested. However, these modulation techniques have some limitations in practical operation. In this paper, the application of conventional inverter modulation techniques is suggested for the control of the resonant DC link inverter. The harmonic analysis results are presented. The results show that these modulation techniques offer good output characteristics similar to conventional inverter PWM techniques for the operation of the resonant DC link inverter. This implies that not only the delta modulation technique and instantaneous current control techniques but also various other modulation techniques can be applied to the operation of the resonant DC link inverter. This also indicates that open loop control as well as closed loop control can be used for the operation of the resonant inverter. The resonant DC link inverter with various modulation strategies is implemented using V-40 microprocessors.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.293-304
• /
• 2020

In this paper, various modulation techniques, including the legacy Global Navigation Satellite System (GNSS) signal modulation techniques, are introduced and the spectral characteristics and correlation characteristics of signals with various modulation techniques are analyzed based on numerical simulation. With the development of various GNSS services, the limited frequency band has become increasingly saturated, and issues of interoperability and compatibility have emerged in the new GNSS design. Since the efficient allocation of frequency resources is closely related to spectrum design, modulation techniques are one of the important signal design parameters of new signal design. Signal modulation techniques are closely related to various figure of merits (FoMs) as well as spectrum characteristic, and in some cases there is a complicated trade-off between FoMs. Thus, the FoMs associated with modulation technology should be analyzed and the best signal candidates should be chosen carefully via the trade-off analysis for FoMs. In this paper, we define the modulation technique based on Phase Shift Keying (PSK), Binary Offset Carrier (BOC) and Continuous Phase Modulation (CPM) for the design of KPS signals, and the FoMs of signals in terms of spectrum and correlation function are evaluated. Signals with various modulation techniques are implemented through a numerical simulation, and the relevant FoMs are analyzed.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.65-66
• /
• 2005

This paper presents an adaptive satellite communication systems to adapt channel environment. High performance coding and modulation techniques are applied to poor channel condition, otherwise, bandwidth efficient coding and modulation techniques are applied to good channel condition to obtain high transmission rate.

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.98-103
• /
• 2012

This paper presents a digital pulse width modulator (DPWM) with a reduced digital modulation delay (a transport delay of the modulator) during the transient response of power converters. During the transient response operation of a power converter, as a result of dynamic variations such as load step-up or step-down, the closed loop controller will continuously adjust the duty cycle in order to regulate the output voltage. The larger the modulation delays, the larger the undesired output voltage deviation from the reference point. The three conventional DPWM techniques exhibit significant leading-edge and/or trailing-edge modulation delays. The DPWM technique proposed in this paper, which results in modulation delay reductions, is discussed, experimentally tested and compared with conventional modulation techniques.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.381-384
• /
• 2002

Orthogonal Frequency Division Multiplexing (OFDM), which employs orthogonal overlapping subcarriers to modulate the signals, has been attracted much attention in recent time as a favorable option for future generation wireless networks due to its ability to overcome many impairments in wireless channels. Since OFDM is a multi-carrier system adaptive modulation techniques can be effectively and efficiently used to enhance the system performance in terms of both BER and overall system capacity. This paper discusses a COFDM-CDMA system with adaptive modulation schemes for future generation wireless networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1204-1208
• /
• 1991

This paper describes the 2-channel telemeter system using AM(Amplitude Modulation) - FM (Frequency Modulation) techniques suitable for measurement of spindle torque by strain gage. In order to evaluate the developed system, the model tests were performed for test specimens. The developed system was installed on the plate mill and it was possible to measure and analyze the torque signal of spindle,

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.214-217
• /
• 1989

The most attractive feature of semiconductor lasers as sources for coherent optical communication system is the ability to produce frequency modulation by modulation of the bias current. The frequency deviation of semiconductor lasers under direct modulation depends on the laser structure and modulation frequency. This paper describes a circuit modeling techniques for the directly frequency modulated CSP (Channeled Substrated Planner) semiconductor laser. Predictions from this model are compared with the other published results of sinusoidal frequency modulation below than 1 GHz.

• 전기의세계
• /
• 제16권1호
• /
• pp.14-18
• /
• 1967

To analyze th frequency modulation system the characteristic equation of the F-M system, i.e., Mathieu's equation, is derived from the equivalent circuits of direct modulation system. The analysis of F-M equation is undertaken by the Yonsei 101 Analog Computer. And the computer solution is compared with the theoretical solution. It is concluded that not only the frequency but also the amplitude of the carrier wave are changed by varying the modulation index and the system becomes unstable if the modulation index is increased near to unity.

• 대한전자공학회논문지
• /
• 제15권6호
• /
• pp.1-7
• /
• 1978

本 論文에서는 음성신호의 디지털化와 대역폭축소의 한 방법으로 예측부호化 원리를 사용하는 adaptive differential pulse code modulation(ADPCM)과 adaptive delta modulation(ADM)에 관하여 고찰하였다. ADPCM에서 사용되는 대표적인 적응양자기의 원리를 설명하고 적응예측기의 계수를 얻는 두 방법, 즉 브록해석과 연차해석 방법을 검토하였다. 또한 ADM에서 사용되는 세가지 壓伸方法(instantaneous, syllabic, hybrid companding)을 구체적으로 설명하고 그의 성능을 비교하였다. 마지막으로 ADPCM과 ADM을 음성신호의 부호化器로 쓸 때의 성능과 장단점들을 비교 검토하였다.

• 대한전자공학회논문지
• /
• 제15권3호
• /
• pp.1-6
• /
• 1978

본 논문에서는 음성신호의 디지탈화와 대역폭축소의 한 방법으로 예측부호화 원리를 사용하는 adaptive differential pulse code modulation(ADPCM)과 adoptive delta modulation(ADM)에 관하여 고찰하였다. ADPCM에서 사용되는 대표적인 적응양자기의 원리를 설명하고 적응예측기의 계수를 얻는 두 방법, 즉 브록해석과 연차해석 방법을 검토하였다. 또한 ADM에서 사용되는 세가지 압신방법(instantaneous, syllabic, hybrid commanding)을 구체적으로 설명하고 그의 성능을 비교하였다. 마지막으로 ADPCM과 ADM을 음성신호의 부호화기로 쓸 때의 성능과 장단점들을 비교 검토하였다.