• ETRI Journal
• /
• v.26 no.5
• /
• pp.405-412
• /
• 2004

MC-CDMA, a multicarrier (MC) modulation scheme based on code division multiple access (CDMA), is the most likely candidate for the next generation of mobile radio communications. The rate compatible punctured turbo (RCPT) coded hybrid automatic repeat request (HARQ) has been found to give improved throughput performance in a direct sequence (DS) CDMA system. However, the extent to which the RCPT HARQ improves the throughput performance of an MC-CDMA system has not been fully understood. In this paper, we apply the RCPT HARQ to MC-CDMA and evaluate by computer simulations its performance in a frequency selective Rayleigh fading channel. We found that the performance of RCPT HARQ MC-CDMA is almost insensitive to channel characteristics. The performance can be drastically improved with receive diversity combined with space-time transmit diversity. In addition, the comparison of RCPT HARQ MC-CDMA, orthogonal frequency division multiplexing, and DS-CDMA shows that under similar conditions the throughput of MC-CDMA is the best in a frequency selective fading channel.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.733-739
• /
• 1987

In this paper, variable threshold detection with weighted pulse code modulation-encoded signals transmitted over Gaussian channels has been investigated. Each bit in the \ulcornerlaw PCM word is weighted according to its significance in the transmitter. It the output falls into the erasure zone, the regenerated sample replaced by interpolation or prediction. To overall system signal to noise ratio for BPSK/PCM speech signals of this technique has been found. When the input signal level was -17 db, the gains in overall signal s/n compared to weighted PCM and variable threshold detection were 5 db and 3 db, respectively. Computer simulation was performed generating signals by computer. The simulation was in resonable agreement with our theoretical prediction.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.833-840
• /
• 1987

A new Block Truncation Coding(BTC) technique reducing the bit-plane and using differential pulse code modulation (DPCM) is proposed and compared with the conventional BTC methods. A new technique decides whether the subblock can be approximated to be uniform or not. If the subblock can be approximated to be uniform(merge mode), we transmit only the gray-level informantion. It not (split mode), we transmity both the bit-plane and the gray-level information. DPCM method is proposed to the encoding of gray-level information when the subblock can be approximated to be uniform. Also modified quantization method is presented to the encoding of gray-level information when the subblock is not uniform. This technique shows the results of coding 256 level images at the average data rate of about 0.75 bits/pel.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.13-20
• /
• 2005

In this paper, a new multi carrier, direct sequence code division multiple access (MC-DS-CDMA) system is proposed. Our new signal construction is based on convolutional encoding of the transmitted data, serial-to-parallel (S/P) conversion of the encoded data, Walsh-Hadamard-transformation (WHT), a second S/P conversion of the WHT outputs, spread spectrum (SS) modulation with a common pseudo-noise (PN) sequence, and then multicarrier transmission. The system bit error rate (BER) performance in frequency selective fading channel in the presence of additive white Gaussian noise (AWGN) and a jamming tone is analyzed and simulated. The numerical results are compared with those from an orthogonal MC-DS-CDMA system of Sourour and Nakagawa [7]. It is shown that the two systems have almost the same BER performance, but the proposed scheme has better anti-jamming ability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.260-268
• /
• 1990

This paper investigates the design of a frequency hopping FSK tranceiver system, where the system enhancements are made in the following three aspects: dual frequency synthesiszation for the increased hopping rate, linearization of VCO gain in PLL to improve BFSK modulation characteristics, and fast code synchronization by the matched filter method.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.292-294
• /
• 2001

VoIP(Voice over IP) system은 현재 크게 2가지 형태로 진행되어가고 있다. 첫 번째는 H.323을 이용한 방법이고, 두 번째는 SIP(Session Initiation Protocol)를 이용한 방법이다. H.323은 실제 데이터를 전송하기전 호처리에 많은 signaling이 이루어지는 관계로 SIP보다 많은 RTT(Round Trip Time)를 소모하게 된다. 따라서 매우 복잡하고, LAN환경을 바탕으로 만들어서 확장성면에서도 여러 문제점을 가지고 있다. 그래서 본 논문은 호처리는 SIP를 이용하고, 실제 음성전송은 RTP(Real-Time Transport Protocol)와 RTCP(RTP Control Protocol)를 이용하는 시스템 구현을 제시한다. RTP는 실시간 특성을 가지는 데이터에 대해서 종단간 전송 서비스를 제공해주는 프로토콜로, 어떠한 인코딩에도 적합한 프레임워크를 제공한다. 그런데, RTP는 완전한 하나의 프로토콜이 되기 위해서는 RTP와 페이로드 포맷이 함께 제공되어야 하므로, 구현시스템은 음성신호를 PCM(Pulse Code Modulation), ADPCM(Adaptive Differential PCM)등의 여러 압축기술을 이용하여 파일을 생성하여 실시간으로 RTP와 RTCP를 이용하여 전송하는 방법을 제시한다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.8
• /
• pp.1383-1391
• /
• 2008

This paper presents an implementation of vector control for SPMSM using model based controller design in MATLAB/SIMULINK. The model based controller design enables fast development of control system for motor by designing controllers and performing simulation on the GUI (Graphic User Interface) platform, converting program code directly into real-time programs, and then performing tests for the responses from controllers. The controllers designed in this paper are PI speed controller and decoupling PI current controller. Also space vector modulation method using offset voltage is used in PWM scheme. And system stability is also secured by close magnitude overmodulation method, maintaining dynamics of load when overmodulation occurs. The validity of vector control implemented is verified through simulations and experiments.

• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.755-757
• /
• 2009

Since the research of advanced terrestrial digital multimedia broadcasting system is still in progress, and in our previous paper, in which we introduced how to combine one conventional transmitted symbol with two additional bits to form a new symbol transmission, the bit error performance of LP bits is not realizable, because even we implemented the turbo code to protect the LP bits transmission, to obtain a certain good bit error probability, the value of $E_b/N_0$ cost highly. In this paper, we modified the composition of low-priority symbol and high-priority symbol, and through the system presented in previous paper we get a better simulation result of the LP symbol transmission.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.381-388
• /
• 2022

In 2021, development of a regional satellite navigation system called KPS was approved. In this regard, various studies are in progress, but there is no published signal model. So, in relation to the user segment, it is necessary to design a user receiver, but there is no information. Therefore, in this paper, we assume a signal model that can be a candidate signal for KPS based on related studies. This signal uses CNAV-2 structure navigation message, truncated Gold code and BPSK modulation. Based on this signal, a simulator is designed that can be used for receiver design later. The simulator consists of a signal generator and a signal transmitter, and is verified using a software receiver and spectrum analyzer.