• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1300-1310
• /
• 2003

In this paper, the performance of a multicarrier CDMA system using adaptive modulation and adaptive subchannel allocation scheme is analyzed in Rayleigh fading channel. The proposed adaptive modulator consists of modulation schemes using QPSK 16 QAM, 64 QAM and 256 QAM and constellations are pointed by Gray code. In addition, the threshold of the analysis is average E$\_$b//N$\_$o/ when the BER is 1 %. In the multicarrier system with adaptive subchannel allocation scheme, each DS waveform of user is transmitted over the K subchannels with the biggest fading among L subchannels. In case of the proposed system, total 4 subchannels are used and data are transmitted over 2 subchannels with the biggest fading, which results in the threshold of each channels is 5.2 dB, 9 dB, 13.2 dB and 8.4 dB, 12.2 dB, 16.3 dB. In the case of proposed system, the BER of 10$\^$-3/ is satisfied if average E$\_$b//N$\_$o/ is 8.1 dB. This is increased performance of 12.9 dB in comparison with conventional system. The BPS according to average channel is needed average E$\_$b//N$\_$o/ of about 15 dB in 7 bit. In the case of subchannel error, the BER of 10$\^$-3/ is 13.6 dB and is declined about 5.5 dB.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.65-72
• /
• 2010

We propose the asymmetric 2.5Gbps/622Mbps PON(Passive Optical Network) in order to reduce the bandwith of filter at receiver with inverse RZ(Return to Zero) code coded downstream and NRZ(Non Return to Zero) upstream re-modulation. I theoretically analyze BER(Bit Error Rate) performance and the power sensitivity with the optimal threshold level by performing simulation with MATLAB according to the types of downstream data. The results have shown that the optimal threshold level at the optical receiver could be saturated at 0.33 as the optical received power increase more than -26dBm to keep $10^{-12}$ of BER to a minimum. Also the power sensitivity is more improved by about 3dB by fixing the threshold level at 0.33 than the conventional receiver. The proposed system can be a useful technology for optical access networks with asymmetric upstream and downstream data rates because the optical receiver can be used without controlling threshold levels and that does not require a light source in optical network unit (ONU) and its control circuits in the optical line termination (OLT).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.1-8
• /
• 2003

In this paper, performance of the CPC(complex phase code) which is recently proposed as a practical phase encoding method for phase-code multiplexes holographic memory system is comparatively analyzed with those of the conventional phase codes such as PR(pure random code), RCE(random code with equality), WHM(Walsh Hadamard Matrix). In computer simulation, the size of an address bean is fixed at 32$\times$32 pixels and 0%-25% phase-error ratio in a pixel are intentionally added to the real phase values to consider the nonlinear phase-modulation characteristics of the practical spatial light modulator. From comparative analysis of crosstalks and signal-to-noise ratios for these phase codes by calculating auto-correlation and cross-correlation, it is found that the CPC have the lowest cross-correlation mean value of 0.021, the lowest standard deviation of 0.0113 and the highest signal-to-noise ratio(SNR) of 27.4 among the four types of phase code. In addition, from the calculation of the number of all possible address beams for these four types of phase code as the size of the address beam is fixed to 3232 pixels, the CPC is found to have 6.334$\times$10$^{49}$ address beams, which are relatively higher number than that of the conventional phase codes.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.4
• /
• pp.1594-1617
• /
• 2018

In this paper, we consider a spectrum access scenario which consists of two groups of users, namely Primary Users (PUs) and Secondary Users (SUs) in Cooperative Cognitive Radio Networks (CCRNs). SUs cooperatively relay PUs messages based on Amplify-and-Forward (AF) and Decode-and-Forward (DF) cooperative techniques, in exchange for accessing some of the spectrum for their secondary communications. From the literatures, we found that the Conventional Distributed Algorithm (CDA) and Pragmatic Distributed Algorithm (PDA) aim to maximize the PU sum-rate resulting in a lower sum-rate for the SU. In this contribution, we have investigated a suit of distributed matching algorithms. More specifically, we investigated SU-based CDA (CDA-SU) and SU-based PDA (PDA-SU) that maximize the SU sum-rate. We have also proposed the All User-based PDA (PDA-ALL), for maximizing the sum-rates of both PU and SU groups. A comparative study of CDA, PDA, CDA-SU, PDA-SU and PDA-ALL is conducted, and the strength of each scheme is highlighted. Different schemes may be suitable for different applications. All schemes are investigated under the idealistic scenario involving perfect coding and perfect modulation, as well as under practical scenario involving actual coding and actual modulation. Explicitly, our practical scenario considers the adaptive coded modulation based DF schemes for transmission flexibility and efficiency. More specifically, we have considered the Self-Concatenated Convolutional Code (SECCC), which exhibits low complexity, since it invokes only a single encoder and a single decoder. Furthermore, puncturing has been employed for enhancing the bandwidth efficiency of SECCC. As another enhancement, physical layer security has been applied to our system by introducing a unique Advanced Encryption Standard (AES) based puncturing to our SECCC scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.610-617
• /
• 2009

This paper proposes a cross-layer design combining adaptive modulation and coding (AMC) with truncated hybrid automatic repeat request (HARQ) for wireless multicast transmission, in order to increase the spectral efficiency while meeting the target quality-of-service (QoS). In the design, we provide the selection criterion of AMC so as to satisfy the target packet error rate (PER) of all users when the multicast data is received through the common channel and the number of retransmission is limited by the delay constraint of the service. The analytically derived results show that the cross-layer design using HARQ provides a better spectral efficiency than the AMC without HARQ by allowing retransmission and code combining. It is also observed that the design for multicast outperforms that for unicast in the mid to high signal-to-noise ratio region.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.721-732
• /
• 2009

AT-DMB system has been developed to increase data rate up to double of conventional T-DMB in same bandwidth while maintaining backward compatibility. The AT-DMB system adopted hierarchical modulation which adds BPSK signal or QPSK signal as enhanced layer to existing DQPSK signal. The enhanced layer signal should be small enough to maintain backward compatibility and to minimize the coverage loss of existing T-DMB service area. But this causes the enhanced layer signal of AT-DMB susceptible to fading effect in transmission channel. A turbo code which has powerful error correction capability is applied to the enhanced layer signal of the AT-DMB system for compensating channel distortion. We developed the prototype AT-DMB transmitter and receiver systems for performance evaluation. LAB test for analysing the effect of constellation ratio between existing base layer signal and enhancement layer signal, was conducted and the measurement results are shown with analysis comments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1613-1621
• /
• 2015

This paper analyzes the rate adaptation scheme and suggests applicable strategy of the MCS(Modulation and Coding Scheme) for improving DCF throughput in the IEEE 802.11ad and 802.11ad wireless LAN. IEEE 802.11ac and 802.11ad wireless LAN provide MCS technique that dynamically adjusts modulation level and code rate to the time-varying channel conditions in order to obtain considerably high data rates. But these standards did not provide rate adaptation algorithm, so this paper surveyes rate adaptation algorithm and suggests MCS scheme applied to IEEE 802.11ac and 802.11ad wireless LAN. Specially A MAC(Medium Access Control) layer throughput is evaluated over error-prone channel in the IEEE 802.11ac-based wireless LAN. In this evaluation, DCF (Distributed Coordination Function) protocol and A-MPDU (MAC Protocol Data Unit Aggregation) scheme are used. Using theoretical analysis method, the MAC saturation throughput is evaluated with the PER (Packet Error Rate) on the condition that the number of station, transmission probability, the number of parallel beams and the number of frames in each A-MPDU are variables.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.14-24
• /
• 2017

In this paper, we propose a new EIM(erasure insertion method) based on the average-minimal-noise-power for HOM(higher order modulation) over AWGN(additive white Gaussian noise) under PBJ(partial-band jamming). Then we design SFH/SS(slow-frequency-hopping spread-spectrum) system by applying this method and formulate the PER(packet error rate) of the system. Based on this formula, we propose a new method to set the optimal threshold of the EIM and verify it at the designed 16-QAM SFH/SS system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.10A
• /
• pp.962-968
• /
• 2002

Reliable high-speed data communications over insufficient channel bandwidth is one of the major challenges of harsh wireless environments that push the achievable spectral efficiency far below its theoretical limits. A Quadrature amplitude modulation (QAM) scheme is a userful modulation technique for achieving high data rate transmission without increasing the bandwidth of wireless communication systems. The exact general bit error rate (BER) expression of arbitrary rectangular quadrature amplitude modulation has not yet been derived. In this paper, a generalized closed-form expression for the BER performance of rectangular QAM with Gray code bit mapping is derived and analyzed in the presence of additive white Gaussian noise (AWGN) channel. First we analyze the BER performance of an I-ary PAM scheme. Regular patterns in the k-th bit error probability are observed while developing the EBR expression. From these patterns we provide the exact and general closed-from EBR expression of an I-ary PAM. Then we present a general closed-from expression for BER of an arbitrary IXJ rectangular QAM by considering that this signaling format consists of two PAM scheme, i.e., I-ary and J-ary PAM. A simple approximate BER expression for rectangular QAM is given as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.608-616
• /
• 2007

OFDM Systems for multi-user use adaptive modulation and ending (AMC) which is a method that selects suitable modulation order and code rate depending on channel state of each user. Using AMC, OFDM system can provide high quality and reliable communication. Base station using AMC scheme requires downlink channel information of each terminal to operate optimality. However, under practical system environment, it is unsuitable to transmit all channel information because uplink bandwidth of the system is limited. In this paper, we propose a flexible block-wise loading (FBL) algorithm combined with a novel CQI feedback scheme with reduced number of required bits to optimize the performance of AMC system. Proposed algorithm allocates sub-carrier groups dynamically to improve the sector throughput and outage probability performance.