• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.2 s.10
• /
• pp.19-28
• /
• 2006

In the IEEE 802.15.4a system, they require simple, economical and low power consumption transmitter and receiver to transmit low rate data and to identify distance and location. To meet these requirements, LR-WPAN system use transmitter and receiver with simple modulation and demodulation scheme. In this paper, use PPM+BPSK modulation and windowing scheme to overcome multipath fading effect. Then we apply this channel estimation scheme to LR-WPAN system and compare performance depends on transmitter scheme. Proposed method using preamble to find channel characteristic out and we compensate distorted data with that information. Therefore we can detect signal easily at the demodulation part. Simulation result shows that performance evaluation is greater at the NLOS channel than LOS channel no matter what the receiver scheme.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.156-161
• /
• 2007

In a TDD system, the length of slots can be unequal, and the number of downlink (DL) and uplink (UL) slots per frame can be different as well. The advantage of using TDD is the capability to accommodate asymmetric high-bit-rate services for the DL and It, which will be one of the prominent features in 4G systems. This paper analyzes the performance of TDD system on mobile channel environments like indoor pedestrian and vehicular channel, and proposes optimum modulation/demodulation method in TDD system. A rectangular QAM (RQAM) used in various communication systems has good BER performance but the much more signal amplitudes also have become one of the barriers to implement receiver. While PSK receiver is implemented easily because it has a constant amplitude, but it's BER performance is worse than RQAM. APSK proposed in this paper integrates merits of RQAM and PSK, and minimizes demerits of then And a simple method is also proposed to demodulate the soft symbol. The results indicate that the proposed APSK has a little worse performance than RQAM but the dynamic range of APSK is about 4 dB, 8 dB better than RQAM at 16-ary, 64-ary modulation/demodulation respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.166-171
• /
• 2012

In this paper, short-range underwater wireless communication technique using visible LEDs is proposed. As an alternative to conventional acoustic system, visible LED communications show high quality and high speed data transmission characteristics. We design a frequency modulation-based optical wireless audio transmission system. The CD4046B phase-locked loop device is applied to implement the frequency modulation and demodulation. With a transmission modulation of 100 kHz, audio signal has successfully received at a transmission distance of 30 cm.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.6-12
• /
• 2018

In this paper, a 32-variable pulse position modulation (32-VPPM) scheme is proposed to support a red-green-blue light-emitting-diode (RGB-LED)-based optical camera communication (OCC) system. Our proposed modulation scheme is designed to enhance the OCC data transmission rate, which is targeted for the wearable biomedical data monitoring system. The OCC technology has been utilized as an alternative solution to the radio frequency (RF) wireless system for long-term self-healthcare monitoring. Different biomedical signals, such as electrocardiograms, photoplethysmograms, and respiration signals are being monitored and transmitted wirelessly from the wearable biomedical device to the smartphone receiver. A common 30 frames per second (fps) smartphone camera with a CMOS image sensor is used to record a transmitted optical signal. Moreover, the overall proposed system architecture, modulation scheme, and data demodulation are discussed in this paper. The experimental result shows that the proposed system is able to achieve > 9 kbps using only a common smartphone camera receiver.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.1
• /
• pp.82-89
• /
• 2014

This paper discusses the methods for reducing the sampling time quantization errors of the body dither type ring laser gyroscope. A ring laser gyroscope has the angle quantization error which is generated by the frequency counting method of the laser beat signal and sampling time quantization error which is generated by the demodulation method for eliminating the body dithering in which the sampling periods are fitted to the dither periods. Generally, because the dither periods are longer than the calculation periods of the inertial navigation system, vehicle navigation errors are produced by long time attitude update missing during the vehicle move with a high dynamical motion. In this paper, the double demodulation method is proposed for reducing the sampling time quantization error and its effects under the dynamic situation are confirmed by simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.5
• /
• pp.755-764
• /
• 2001

In this paper, we propose maximum likelihood (ML) decision feedback channel estimation (DFCE) for M-ary orthogonal modulation in direct sequence/code division multiple access (DS/CDMA) systems. The proposed DFCE uses the maximum combiner output in a RAKE receiver as decision feedback information, enabling M-ary orthogonal signals to be demodulated coherently and a RAKE receiver to use a em maximal ration combining (MRC) scheme. However, the performance of the proposed DFCE in the multiuser environment is severely degraded due to multiple access interference (MAI). To overcome this problem, a multistage parallel interference cancellation (PIC) scheme is combined with the proposed DFCE for multiuser environments. Accurate knowledge of the channel coefficient estimated by the proposed DFCE is used to regenerate the signal of each user for the multistage PIC scheme. According to the results of our simulations, the performance of coherent demodulation using the proposed system is significantly improved in comparison with conventional noncoherent demodulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.530-537
• /
• 2019

In this paper we propose a novel approach to representation of the 3D reconstruction problem by employing a concept of system function that is defined as the ratio of the output to the input signal. Akin to determination of system function (or system response), this paper determines system function by choosing (or defining) appropriate input and output signals. In other words, the 3D reconstruction using structured circular light patterns is reformulated as determination of system function from input and output signals. This paper introduces two algorithms for the reconstruction. The one defines the input and output signals as projected circular light patterns and the images overlaid with the patterns and captured by camera, respectively. The other one defines input and output signals as 3D coordinates of the object surface and the image captured by camera. The first one leads to the problem as identifying the system function and the second one leads to the problem as estimation of an input signal employing concept of modulation-demodulation theory. This paper substantiate the proposed approach by providing experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.1-9
• /
• 2010

This paper offers performance analysis of selection decode and forward (DF) networks with differential modulation/demodulation for an arbitrary number of relays in independent but not identically distributed Rayleigh fading channels. We have shown that the selection DF protocol with differential modulation can achieve full diversity in both independent identically distributed (i.i.d.) and independent but not identically distributed (i.n.d.) Rayleigh fading channels, and the performance loss due to using non-coherent detection is not substantial. Furthermore, we study the impact of combining techniques on the performance of the system by comparing a system that uses selection combining (SC) to one that uses maximum ratio combining (MRC). Simulations are performed and show that they match exactly with analytic ones in high SNR regime.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.9-13
• /
• 2000

This paper represents analysis of field test results of terrestrial DTV on channel repeaters over Taejon city area. Two kind of on channel repeaters were tested. Non-regenerative repeater performs filtering, amplifying and re-transmit received main DTV signal. Regenerative repeater performs demodulation, modulation and amplifying and re-transmit received main DTV signal. The non-regenerative repeater threshold D/U ratio is about 10dB better than regenerative repeater's one.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.583-585
• /
• 1994

In this study, we have evaluated the effect of amplitude and frequency perturbation of EGG signal during single vowels associated with laryngeal pathology. The normal EGG signal is properly characterized by an autoregressive model which has the optimal order of ninth using the parametric method. This can be analyzed by determining the transfer function. Perturbations in the fundamental pitch and in the peak amplitude of EGG signal derived with a four-electrode system using the modulation/demodulation techniques were investigated for the purpose of developing a decision criteria for the laryngeal function identification.