• Structural Engineering and Mechanics
• /
• 제32권3호
• /
• pp.399-406
• /
• 2009

A three-dimensional panel system, which was offered as a new method for construction in Jordan using relatively high strength modular panels for walls and ceilings, is investigated in this paper. The panel consists of two steel meshes on both sides of an expanded polystyrene core and connected together with a truss wire to provide a 3D system. The top face of the ceiling panel was pored with regular concrete mix, while the bottom face and both faces of the wall panels were cast by shotcreting (dry process). To investigate the structural performance of this system, an extensive experimental testing program for ceiling and wall panels subjected to static and dynamic loadings was conducted. The load-deflection curves were obtained for beam and shear wall elements and wall elements under transverse and axial loads, respectively. Static and dynamic analyses were conducted, and the performance of the proposed structural system was evaluated and compared with a typical three dimensional reinforced concrete frame system for buildings of the same floor areas and number of floors. Compressive strength capacity of a ceiling panel is determined for gravity loads, while flexural capacity is determined under the effect of wind and seismic loading. It was found that, the strength and serviceability requirements could be easily satisfied for buildings constructed using the three-dimensional panel system. The 3D panel system is superior to that of conventional frame system in its dynamic performance, due to its high stiffness to mass ratio.

• 정보처리학회논문지B
• /
• 제8B권6호
• /
• pp.699-704
• /
• 2001

본 논문에서는 혼성 모듈 구조의 recurrent 시간지연신경회로망(time-delay neural network)과 HMM(hidden Markov model)을 결합한 음성인식을 위한 새로운 구조에 대해 연구하였다. 시간지연신경회로망에서는 윈도우 크기를 확장하는 것이 인식률 향상에 유리하므로 이를 위해 첫 번째 은닉층에 궤환 구조를 사용하여 윈도우 크기를 실제로 크게 하지 않고도 동일한 효과를 얻을 수 있도록 하였다. 다음 이 시간지연신경망에서 입력된 음소의 특징 벡터의 시간에 따라 변화하는 성질을 잘 처리 할 수 있도록 시간지연신경회로망의 입력층을 복수의 상태로 나누어 음소특징의 시간축에 대한 각 상태마다 특징 감지기를 갖도록 하였다. 이때 시간지연신경회로망은 전체 음성인식 영역에 적용될 수 있도록 모듈 방식의 구조로 구성되었다. 그리고 이 모듈 구조 시간지연신경망의 출력 벡터를 HMM에 연결하여 서로 결합 하므로써 양 구조의 장점을 취하는 혼성 구조의 인식시스템을 구성하였고 이때 이 혼성 구조에서 효율적으로 적용할 수 있는 HMM 파라미터 smoothing 방법을 제시하였다.

• KIEE International Transactions on Power Engineering
• /
• 제3A권3호
• /
• pp.139-147
• /
• 2003

The paper presents a novel approach of constructing the state matrix of the multi-machine power system for SSR (subsynchronous resonance) analysis using the linearized equations of individual devices including electrical transmission network dynamics. The machine models in the local d-q reference frame are integrated with the network models in the common R-I reference frame by simply transforming their output equations into the R-I frame where the transformed output is used as the input to the network dynamics or vice versa. The salient feature of the formulation is that it allows for modular construction of various component models without rearranging the overall state space formulation. This universal SSR small signal stability program provides a flexible tool for systematic analyses of SSR small-signal stability impacts of both conventional devices such as generation systems and novel devices such as power electronic apparatus and their controllers. The paper also presents its application results to IEEE benchmark models.

• 한국항해항만학회지
• /
• 제37권3호
• /
• pp.315-320
• /
• 2013

According to climate change, deficiency of usable land, large water portion of the Earth surface, and improvement of income level, floating architecture is emerging as a strong & attractive alternative. The aim of this study is to suggest some related applying ways for new building projects around waterside. New paradigm of architecture can be described as a new model and/or system of architecture with new concept and Zeitgeist like sustainability and green building. Floating building is already a new paradigm of architecture comparing with the preconception of building only on the land and current building regulations. New paradigm features from the sample projects can be summarized as new concepts of building, application of various renewable energy resources(water, solar, wind), modular construction, use of local raw material, dual purpose usage, long term and relocatable usage, and special building materials for green building.

• 한국농공학회논문집
• /
• 제52권5호
• /
• pp.69-76
• /
• 2010

The structural material with the highest possibility of new materials that will be used in the future construction field is fiber reinforced polymer. The current studies on FRP members by using such excellent material characteristics mostly focused on stability, composite problem, and durability of FRP members. The initially constructed FRP members secure excellent stability and durability compared to reinforced concrete and steel materials, but measures for defections during the periodical inspection, methods for detecting breakages, and maintenance and reinforcement are not insufficient. Accordingly, this study proposed a measurement system using the FRP sensor to evaluate the safety of the FRP modular box member, and applied the phased array ultrasonic technique to detect the defects and damage likely to occur during the performance period.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.285-291
• /
• 1997

This study is the experimental results on the applicability of the super flowing concrete, which is the pre-cast concrete, to various cases. The primary purpose of this study is to verify the demolding strength, the handling strength of the super flowing concrete at various curing conditions, and the site quality control of the DWS (Daewoo Multi-Room Modular Construction System). From the experimental works, required strength and curing cycles are satisfied. Furthermore site quality control details and quality of the pre-cast concrete using the super flowing concrete are obtained. From now on, this study may suggest how to apply the super flowing concrete for common circumstance.

• 한국주거학회논문집
• /
• 제23권4호
• /
• pp.41-48
• /
• 2012

The purpose of the study, approaching from the aspect of the construction technologies, is to determine the architectural techniques of traditional wood architects in existence, through which the systems and techniques that create the inherent characteristics of Korean Architecture are clarified. With understanding traditional construction system and focusing on the fact that built environment results from the consistent standards and technologies of architects, this study inquires into the systematic standard and its formation that present in the process of planning for the overall scale and shape of a building from the following (four) perspectives. The study determines the characteristics of '間(Kan)' (unit; fundamental unit that measures Korean traditional houses) and the methods of columns disposition of which the '間 (Kan)' is made up. Once the necessary spaces are decided according to the size of a building, then floor plans are drawn with the standard unit, '間(Kan)'. The '間(Kan)', as a modular unit, is not only composing the floor plans, but also functioning as an Area unit, Space unit and Structural unit. Composition of '間(Kan)' varies with disposition of columns, and therefore multiform of floor and spaces are created. In this study, the '間(Kan)', as a standard unit, is used in the form of specific size and area, and it is demonstrated how the floor plans are developed by organizing the columns in accordance with the spaces requested.

• 대한조선학회논문집
• /
• 제42권4호
• /
• pp.411-420
• /
• 2005

World leading company and research centers have invested much cost and effort into a PLM and digital manufacturing field to obtain their own competitiveness. We have been trying to apply a digital manufacturing, especially simulation to ship production process as a part of PLM implementation for a shipyard. A shipbuilding production system and processes have a complexity and a peculiarity different from other kinds of production systems. So, new analysis and modeling methodology is required to implement digital shipyard. which is a digital manufacturing system for a shipbuilding company. This paper suggests an analysis and simulation modeling methodologies for an implementation of a digital shipyard. New methodologies such as a database-merged simulation, a distributed simulation, a modular simulation with a model library and a 3-tire simulation framework are developed.

• 패션비즈니스
• /
• 제20권1호
• /
• pp.35-52
• /
• 2016

Yeohlee Teng's 'Urban Nomad' concept stresses high mobility and flexibility in 'Clothing-as-shelter' in order to satisfy the needs of urban dwellers. Yeohlee interprets clothing as a portable environment that protects and shelters urban nomads as well as creates space of clothing as intimate architecture. This study examines Nomadism in Yeohlee's designs since 1981 when she received the attention from the fashion critics, by conducting literary survey as well as case analysis. Nomadism in Yeohlee's work showed the following characterizes. First, 'modular system' deals with the organized dressing system that enables interchanging and layering of separates that function in the fifth season; second, 'organic geometry' describes the architectonic approach to clothing as wearable structure that transforms two dimensional geometry into three dimensional form; third, 'functionalism' refers to the use of technological novel materials, ergonomic clothing construction, and the strategy of using structure as decoration; and fourth, 'reductionism' is the economical approach for realizing Nomadism, which is composed of one-size-fits-all as well as unisex size system and 'zero waste' strategy to maximize use of a piece of cloth.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권4호통권56호
• /
• pp.116-125
• /
• 2009

최근 건설 기술 발달에 따라 공기 단축을 위하여 세그먼트를 공장 제작하고 현장에서 용접 또는 볼팅 등의 방법으로 접합을 하는 시공이 이루어지고 있으며, 확대되고 있는 추세이다. 이때 강과 콘크리트로 구성된 합성부재의 용접시, 용접열이 약 20,000$^{\circ}C, 용접부 주변 온도가 1,300$^{\circ}C 이상이 될 정도로 높은 온도가 생성 된다. 이때 높은 온도로 인하여 용접부와 맞닿아 있는 콘크리트의 강도 감소가 발생하며, 경우에 따라서 국부적으로 강도감소가 매우 큰 곳도 존재하게 되어 구조물 거동에 영향을 미칠 수 있다. 본 연구에서는 이를 방지하기 위해 강재와 콘크리트 사이에 보강재를 삽입하여 용접열에 의한 콘크리트의 강도 감소를 방지하는 방법을 제시하였다.