• Journal of Korean Society on Water Environment
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2013

This study was focused on improving nitrification efficiencies of M-dephanox (Modified-Dephanox) process. Rotating biological contactor (RBC) was used instead of floating sponge type media in nitrification reactor. High ammonia removal efficiencies were observed in nitrification reactor, regardless of organic loading from contactor of M-dephanox process. Denitrification efficiencies were also increased to maintain low $NO_3-N$ concentration in effluent. This enhanced phosphate release in anaerobic contactor and resulted in high removal efficiencies of phophorus. Average removal efficiencies of $TCOD_{Cr}$ and $SCOD_{Cr}$ were 93.8% and 81.6%, respectively, while those of TKN and ${NH_4}^+-N$ were 80.9% and 74.4%, respectively. As for phosphorous treatment, the average removal efficiencies of TP and OP were 94.7% and 94.3%, respectively. Also, effect of operating temperature on nitrogen removal was examined. Average removal efficiency of TN was 65.8 % at $15^{\circ}C$ or below (at average temperature of $13.3^{\circ}C$), while that was 82.8% at $15^{\circ}C$ or above (at average temperature of $21.9^{\circ}C$).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.3
• /
• pp.237-245
• /
• 2004

The deformities of micrognathia and glossoptosis in the newborn are frequently associated with a cleft palate, which is known as Pierre Robin sequence. Upper airway obstruction is the most serious problem in these patients. Treatment of Pierre Robin sequence includes either positional or surgical intervention. Mild cases are often managed in the prone position. However, when the patient fails to thrive due to chronic upper airway obstruction, or severe respiratory distress ensures despite positional treatment, surgical intervention is mandatory to relieve the obstruction. We experienced three infants with Pierre Robin sequence who showed a symptom triad of micrognathia, glossoptosis, and cleft palate. Intermittent cyanosis, depression of the chest, respiratory difficulty and feeding problems were also observed. To relieve severe upper airway obstruction caused by micrognathia and glossoptosis, we simultaneously performed modified tongue lip adhesion (TLA) and a subperiosteal release of the floor of the mouth (SRFM). Respiratory and feeding difficulties were relieved, the tongue positioned anteriorly, body weight increased, and mandibular growth improved. Simultaneous TLA and SRFM may constitute a simple and reliable method for surgical treatment of airway obstruction in patients with Pierre Robin sequence.

• The Korea Journal of Herbology
• /
• v.23 no.1
• /
• pp.53-61
• /
• 2008

Objectives : The aim of this study was to investigative the effects of Gagambojungikgi-tang (GBT), a Korean herbal medicine, on the immune mediators, T cell proliferation and wound healing in the recombinant Sj26 (rSj26) antigen induced atopic dermatitis(AD) model mice. Methods : GBT is the water extracts prepared from mixture of Ginseng Radix, Astragali Radix, Angelicae gigantis Radix, Atractylodes Rhizoma alba, Aurantii nobilis Pericarpium, Glycyrrhizae Radix, Artemisia iwayomogi Herba, Scutellaria Radix, Lonicera japonica Flos. This is a modified prescription of Bojungikgi-tang, which has been used for the treatment of indigestion, and immunological disease in east-asian countries. GBT was orally administered or externally applied at difference doses. The levels of immune mediators [(IgE, IgG1, prostaglandin E2 (PGE2), Th1/Th2 cytokines], T cell proliferation, and wound healing in the rSj26 or chemical antigen induced AD model BALB/c were investigated. Results : GBT dose-dependently suppressed the release of TNF-${\alpha}$, IL-$1{\beta}$ (Th1 cytokines), IL-4, IL-10 (Th2 cytokines), PGE2 (inflammatory mediators) and T cell proliferation. But GBT increased the production of IFN-${\gamma}$ (Th1 cytokine). Furthermore, A wound healing effect of GBT was similar to external application of dexamethasone. Conclusions : These results suggest that GBT suppresses the inflammatory mediators and regulates the Thl/Th2 cytokines, and promotes the wound healing. Therefore, these properties may contribute to the strong anti-AD effect of GBT.

• 한국연소학회:학술대회논문집
• /
• 1998.10a
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.350-356
• /
• 2017

We previously reported that the CopA3 peptide (LLCIALRKK, ${\small{D}}-form$) originally isolated from the Korean dung beetle has antimicrobial and immunosuppressive effects. However, the high cost of producing the synthetic peptide, especially the ${\small{D}}-form$, has limited the development of CopA3 for therapeutic purposes. Here, we investigated whether the CopA3 deletion derivative, CopA5, which is composed of only five amino acids (LLCIA) and has the ${\small{L}}-form$ structure, could inhibit the lipopolysaccharide (LPS)-induced activation of macrophages. Peritoneal exudate macrophages (PEM) were isolated from mice and exposed to LPS in the presence or absence of CopA5, and biomarkers of macrophage activation were measured. Our results revealed that LPS-induced nitric oxide (NO) production, tumor necrosis factor $(TNF)-{\alpha}$ secretion, and phagocytic activity of PEM were significantly inhibited by CopA5 treatment. Similar to CopA3, the structurally modified CopA5 peptide had no cell toxicity (as assessed by measurement of cell viability loss and apoptosis) in PEM. Moreover, the LPS-induced upregulation of the activating phosphorylation of signal transducer and activator of transcription 1 (STAT1) was markedly inhibited by CopA5 treatment. These results suggest that, similar to CopA3, CopA5 inhibits macrophage activation by inhibiting STAT1 phosphorylation and blocking the release of NO and $TNF-{\alpha}$. CopA5 may therefore prove therapeutically useful in the realm of immune suppression.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2001.12a
• /
• pp.69-73
• /
• 2001

Two opioid peptides, YPLDL and YPLDLF, were isolated from enzymatic digests of spinach ribulose-1, 5-bisphosphate carboxylase/oxygenase (RuBisCO) and named rubiscolin-5 and -6, respectively. These peptides were selective for delta-receptor and the latter was about 3 times more potent than the former. After oral administration in mice at the dose of 100 mg/kg, rubiscolin-6 showed analgesic activity in tail pinch test. It also stimutated learning performance at the same dose in passive avoidance experiment using step-through apparatus. An immunostimulating peptide, MITLAIPVNKPGR, was isolated from a trypsin digest of soybean protein and named soymetide. Immunostimulating activy of soymetide was mediated by fMLP receptor. Interestingly, after oral administration in rats at a dose of 300 mg/kg (po.), soymetide-4 (MITL) protected alopecia (hair-loss) induced by etoposide, a cancer chemotherapy agent. Stimulation of IL-1 release by the peptide was involved in the mechanism. Ovokinin(2-7), RADHPF, is a vasorelaxing peptide released from ovalbumin by the action of chymotrypsin. It lowered blood pressure of spontaneously hypersensive rats (SHR) after oral administration at a dose of 10 mg/kg. RPLKPW, which was designed by replacing 4 amino acid residues in ovokinin(2-7), exhibited hypotensive activity at a dose of 0.1 mg/kg (po.). This peptides was introduced into 3 homologous sites in soybean beta-conglycinin alpha' subunit by site-directed mutagenesis of the cDNA and expressed in E. coli. The minimum effective dose for hypotensive activity of the genetically modified beta-conglycinin alpha' subunit was 10 mg/kg (po.), which is about 1/200 that of ovalbumin.

• Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.140-150
• /
• 2016

Normally all manufacturing and fabrication processes introduce residual stresses in a component. These stresses exist even after all service or external loads have been removed. Residual stresses have been studied elaborately in the past and even in depth research have been done to determine their magnitude and distribution during different manufacturing processes. But very few works have dealt with the study of residual stresses formation during the casting process. Even though these stresses are less in magnitude, they still result in crack formation and subsequent failure in later phases of the component usage. In this work, the residual stresses developed in a shifter during casting process are first determined by finite element analysis using ANSYS(R) Mechanical APDL, Release 12.0 software. Initially the analysis was done on a simple block to determine the optimum element size and boundary conditions. With these values, the actual shifter component was analyzed. All these simulations are done in an uncoupled thermal and structural environment. The results showed the areas of maximum residual stress. This was followed by the geometrical optimization of the cast part for minimum residual stresses. The resulting shape gave lesser and more evenly distributed residual stresses. Crack compliance method was used to experimentally determine the residual stresses in the modified cast part. The results obtained from the measurements are verified by finite element analysis findings.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.23-32
• /
• 2015

Facile immobilization of growth factors in hyaluronic acid (HA) hydrogels using dual enzymes is reported in the paper. The hydrogels were formed by using horseradish peroxidase (HRP) and hydrogen peroxide ($H_2O_2$) and transforming growth factor-${\beta}3$ (TGF-${\beta}3$) was covalently conjugated on the hydrogels in situ using tyrosinase (Ty) without any modifications. For the preparation of hydrogels, HA was grafted with poly(ethylene glycol) (PEG), which was modified with a tyrosine. The gelation times of the HA hydrogels were ranging from 415 to 17 s and the storage moduli was dependent on the concentration of $H_2O_2$ and Ty (470-1600 Pa). A native TGF-${\beta}3$ (200 ng/mL) was readily encapsulated in the HA hydrogels and 17% of the TGF-${\beta}3$ was released over 1 month at the Ty concentration of 0.5 KU/mL, while the release was faster when 0.3 KU/mL of Ty was used for the encapsulation (27%). It can be suggested that the growth factors resident in the hydrogels for a long period of time may lead cells proliferating and differentiating, whereas the growth factors that are initially released from the hydrogels can induce the ingrowth of cells into the matrices. Therefore, the dual enzymatic methods as facile gel forming and loading of various native growth factors or therapeutic proteins could be highly promising for tissue regenerative medicines.

• Elastomers and Composites
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2004

In this work, the diglycidylether of bisphenol A (DGEBA) and modified polyurethane (PU) blends were initiated by N-benzylpyrazinium hexafluoroantimonate (BPH). The cure and fracture toughness of neat DGEBA with the addition of PU were investigated. The cure properties of DGEBA/PU blend system were examined by DSC and near-IR measurements. The fracture touhtness were investigated by measuring the critical stress intensity factor ($K_{IC}$) and the critical strain energy release rate ($G_{IC}$). According to the results, the maximum values of owe activation energy ($E_a$) and conversion (${\alpha}$) were found at 10 phr of PU. Also the $K_{IC}$ showed a similar behavior with the results of conversion. These results were probably due to increase of crosslinking density in the blends resulted from increase of the hydrogen bonding between the hydroxyl groups of DGEBA and isocyanate groups of PU.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.197-204
• /
• 1993

Abstract The effects of the hole size and the specimen width on the fracture behavior of several fabric composite plates are experimentally investigated in tension. Tests are performed on plain woven glass/ epoxy, plain woven carbon/epoxy and satin woven glass/polyester specimens with a circular hole. It is shown in this paper that the characteristic length according to the point stress criterion depends on the hole size and the specimen width. An excellent agreement is found between the experimental results and the analytical predictions of the modified failure criterion. The notched strength increase with an increase in the damage ratio, which is explained by a stress relaxation due to the formation of damage zone. When the unstable fracture occurred, the critical crack length equivalent for the damage zone is about twice the characteristic length. The critical energy release rate $G_c$ is independent of hole size for the same specimen width. The variation of $G_c$ according to the material system, fiber volume fraction and specimen width relates to the notch sensitivity factor. $G_c$ increases with a decrease in the notch sensitivity factor, which can be explained by a stress relaxation due to the increase of damage zone.