• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.269-274
• /
• 2002

statement of problem The viscoelastic property is the most important and peculiar characteristics of soft liners. But the authorized standard is not certainly established than other dental materials. purpose of study This study is aimed to compare the initial flow of gelation of the modified soft liner with 4-META with that of PMMA soft liners using dynamic method and evaluate the clinical acceptance of the trial materials. materials and method This study consists of 3 groups with the given % of 4-META powder in the Coe soft liquid; 0%, 5%, 10% Each group was tested for 10 times to record the change of G′values during 3 hours. the gelation time was recorded by the oscillating rheometer with parallel plate with 1 rad/sec. results As the results of this study, the gelation time of modified soft liner was elongated by 5 to 6 minutes. conclusion The mean gelation time of modified soft liner could be within the range of clinically acceptable.

• Elastomers and Composites
• /
• 제34권5호
• /
• pp.383-390
• /
• 1999

Functionally graded polyurethane elastomers PUEs/grad. Poly(dimethylammoninum ethylacrylate bromide)(PDMAEA) were prepared by the method of electrophoresis. Results of elemental analysis showed that concentration of PDMAEA had gradient across the thickness(2mm) of the base PUEs. The modified PUEs(PUEs/grad. PDMAEA) containing high concentration of PDMAEA displayed low degree of swelling in benzene which was poor solvent for PDMAEA, and high degree of swelling in water which was good solvent. For the each layer of modified PUEs, glass transition temperature, dynamic storage modulus were stooled by DSC, Rheovibron DDV-IIC dynamic viscoelastomer. The chemomechanical properties of modified PUEs was explored by the electric-stimulus.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.215-219
• /
• 2003

Buckling and post-buckling Analysis of Ludwick type and modified Ludwick type elastic materials was carried out. Because the constitutive equation, or stress-strain relationship is different from that of linear elastic one, a new governing equation was derived and solved by $4^{th}$ order Runge-Kutta method. Considered as a special case of combined loading, the buckling under both point and distributed load was selected and researched. The final solution takes distinguished behavior whether the constitutive relation is chosen to be modified or non-modified Ludwick type as well as linear or non-linear. We also derived strain energy function for non-linear elastic constitutive relationship. By doing so, we calculated the criterion function which estimates the stability of the equilibrium solutions and determines critical buckling load for non-linear cases. We applied this theory to the constitutive relationship of fabric, which also is the non-linear equation between the applied moment and curvature. This results has both technical and mathematical significance.

• 전기화학회지
• /
• 제10권1호
• /
• pp.43-47
• /
• 2007

산화환원 화학 종이 화학적으로 흡착 된 전극에서의 전자 이동 현상은 흡착 화학 종이 전극표면에 흡착 되기 전과는 다르게 흡착 된 산화환원 화학 종의 전자 이동 특성에 전적으로 의존한다. 이러한 전극 표면에서의 전자이동에 관한 기본적인 변화는 전자 이동 현상에 관한 기초 연구를 넘어 전기화학 촉매, 전기화학적 바이오센서, 분자전자공학 등에 유용한 지식이 되고 있다. 본 고에서는 산화환원 화학 종이 자기 조립 막을 형성하여 화학적으로 흡착 된 전극을 사용 할 때 전극/용액 계면에서 관측 되는 전기화학 정류 전류와 전압 사이의 관계에 대한 상관관계를 소개 한다.

• 대한소아치과학회지
• /
• 제24권2호
• /
• pp.436-448
• /
• 1997

Topical fluoride application for children is a widely performed procedure in the field of Pediatric Dentistry for its dental caries prevention effects. However, it is recently recognized as having some unwanted effects on several esthetic restorative materials as it roughens the surfaces of the restorative materials. In order to evaluate the surface changes in esthetic restorative materials, the author immersed composite resin, glass ionomer cement, and resin-modified glass ionomer cement specimens in various topical fluoride agents and measured the weight loss and also, examined the specimens under the scanning electron microscope. The followings are the results : 1. All the specimens immersed in APF gel for 4 minutes showed statistically significant weight loss. (paired t-test, P<0.05). 2. There was no statistically significant weight loss for the resin-modified glass ionomer cement and composite resin groups immersed in sodium fluoride solution (paired t-test, P>0.05). 3. When the glass ionomer cement group was immersed in APF gel for 1 and 4 minutes, there was a statistically significant weight loss compare to other esthetic restorative materials (ANOVA, P<0.05). 4. In the resin-modified glass ionomer cement group and the composite resin group, weight loss in the APF gel 4 minutes immersion group was greater than the 1 minute immersion group, and it was statistically significant (ANOVA, P<0.05). 5. When the specimens were examined under scanning electron microscope, the surface changes were greatest in the order of glass ionomer cement, resin-modified glass ionomer cement, composite resin and also in the order of APF gel 4 minute immersion group, 1 minute immersion group, sodium fluoride immersion group, and control group.

• 폴리머
• /
• 제38권6호
• /
• pp.720-725
• /
• 2014

Hydride terminated polydimethylsiloxane과 allyl amine을 hydrosilylation 반응으로 aminopropylpoly-dimethylsiloxane을 합성하고, 이를 hexamethylenediisocyanate(HDI)의 고리화 반응으로 제조된 cyclic HDI trimer와 반응시켜 urea결합으로 결합된 polydimethylsiloxane 변성 urea을 제조하였다. Polydimethylsiloxane 변성 urea의 말단에 있는 isocyante기와 2-hydroxyethylmethacrylate를 반응시켜 말단에 multi acrylate기가 도입된 polydimethylsiloxane 변성 urea/acrylate(PUA)를 제조하였다. 제조한 화합물의 구조를 FTIR, $^1H$ NMR로 확인하였으며, PUA에 아크릴계 단량체, 광 개시제, 용매 등을 여러 가지 조성비로 혼합하여 코팅 액을 제조하였으며 이를 PET 필름에 도포하고 UV을 조사하여 고경도의 유연성을 갖는 코팅 막을 제조하였다. 제조한 코팅 막의 연필 경도는 3H, 접촉각은 $82^{\circ}$, bendability는 $7{\phi}$까지 scratch가 발생하지 않았다.

• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.73-76
• /
• 2010

This study deals with the properties of polymer-modified mortars with a nitrite-type hydrocalumite, which are effectively used as intelligent patch materials for deteriorated reinforced concrete structures. The calumite is a material that can adsorb the chloride ions (Cl-) causing the corrosion of reinforcing bars and liberate the nitrite ions (NO2-) inhibiting the corrosion in reinforced concrete, and can provide a self-corrosion inhibition function to the reinforced concrete. Polymer-modified mortars using hydrocalumite and terpolymer powders are prepared with various calumite contents and polymer-binder ratios, and tested for corrosion inhibition. Subsequently, regardless of the polymer-binder ratio, the replacement of ordinary portland cement with the calumite has a marked effect on the corrosion-inhibiting property of the polymer-modified mortars.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.237-240
• /
• 2002

Amino terminated polyetherimide(ATPEI) has been synthesized by bisphthalic anhydride arid m-phenylenediamine, after that characterized by differential scanning calorimetry(DSC), thermogravimetric analyzer(TGA). Fourier transform (FT-IR) spectroscopy and gel permeation chromatography(GPC). ATPEI was blend to improve the toughness of bisphenol-A type epoxy resin which was cured by nadic methyl anhydride(NMA). The fracture toughness and the molphology of the toughened epoxy resin was evaluated. The toughness of ATPEI modified epoxy resin was higher than that of the PEI modified epoxy resin. In addtion, carbon fiber/ATPEI modified epoxy resin composites were fabricated and the mechanical properties of the resulted composites were investigated.

• Transactions on Electrical and Electronic Materials
• /
• 제10권1호
• /
• pp.9-15
• /
• 2009

There is a growing demand for a high voltage silicone rubber composite with high mechanical property and high electrical property. The effect of modified cross-linking agent on the mechanical, electrical properties, and short-circuit test performance of silicone rubber insulators have been investigated. To use base polymer, the various silicone polymers were prepared by the equilibrium polymerization. Aluminum trihydrate surface was treated by vinyl silane. Liquid silicone rubber nanocomposite was prepared from the compounding of VPMPS, HPDMS, catalyst, and alumina trihydrate modified with 1,3,5-trivinyl-l,3,5-trimethylcyclotrisiloxane. The mechanical property and electrical property for insulation materials were measured, indicating the high tensile strength and the good short-circuit property.