• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.90-96
• /
• 2004

The objective of this study was to develop a model for safe work load based on a physiological model of metabolic energy of manual material handling tasks. Fifteen male subjects voluntarily participated in this study. Lifting activities with four different weights, 0, 8, 16, 24kg, and four different working frequencies (2, 5, 8, 11 lifts/min) for a lifting range from floor to the knuckle height of 76cm were considered. Oxygen consumption rates and heart rates were measured during the performance of sixteen different lifting activities. Simplified predictive equations for estimating the oxygen consumption rate and the heart rate were developed. The oxygen consumption rate and the heart rate could be expressed as a function of task variables; frequency and the weight of the load, and a personal variable, body weight, and their interactions. The coefficients of determination ($r^2$) of the model were 0.9777 and 0.9784, respectively, for the oxygen consumption rate and the heart rate. The model of oxygen consumption rate was modified to estimate the work load for the given oxygen consumption rate. The overall absolute percent errors of the validation of this equation for work load with the original data set was 39.03%. The overall absolute percent errors were much larger than this for the two models based on the US population. The models for the oxygen consumption rate and for the work load developed in this study work better than the two models based on the US population. However, without considering the biomechanical approach, the developed model for the work load and the two US models are not recommended to estimate the work loads for low frequent lifting activities.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.349-355
• /
• 1994

Superrsolution of an optical imaging system, which resolves $\epsilon_O$ (half width of the square top amplitude impulse function) less than the Rayleigh's resolution limit $\epsilon_R$, is theoretically treated by using the diffraction theory, and an experimental system is proposed. Initially superresolution is stated as an inverse problem, and an integral equation is derived as a function of parameter $\beta$, which is positive. The integration is numerically carried out for the given aperture and those given values of $\beta$, which is 1, 5, 10, 15, and 20. 1/2$\times$FWHM's of the amplitude impulse functions are meassured for the cases of diffrent value of {J and in the case of $\beta=5$, the half-width already approaches to $\epsilon_O=0.1$,urn, which is, in the case of the present work, one fifth of the Rayleigh's resolution limit. It is found both the pupil function and the phase of the Huygens wave are to be modified, and theories of the pupil function modulation plate and the phase modulation hologram plate are also presented. The result obtained may be useful in ultrafine optical lithography.graphy.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.669-676
• /
• 2015

Time dependent model for prediction of compressive strength development of concrete cured by microwave heating form was presented in this study. The presented model is similar to the equation which is given in ACI 209R-92 but the constants which is dependent on cement type and curing method in the presented model are modified by the regression analysis of the experimental data. Laboratory scale concrete specimens were cast and cured by the microwave heating form and drilled cores extracted from the specimens were fractured in compression. The measured core strengths are converted to standard core and in-situ strengths. These in-situ strengths are used for the regression.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.823-829
• /
• 2014

In the present study, simple models were proposed to predict the capillary-driven flow length in a surfactant-added poly(dimethylsiloxane) (PDMS) rectangular microchannel. Owing to the hydrophobic nature of PDMS, it is difficult to transport water in a conventional PDMS microchannel by means of the capillary force alone. To overcome this problem, microchannels with a hydrophilic surface were fabricated using surfactant-added PDMS. By measuring the contact angle change on the surfactant-added PDMS surface, the behavior was investigated to establish a simple model. In order to predict the filling length induced by the capillary force, the Washburn equation was modified in the present study. From the investigation, it was found that the initial rate-of-change of the contact angle affected the filling length. Simple models were developed for three representative cases, and these can be useful tools in designing microfluidic manufacturing techniques including MIcroMolding In Capillaries (MIMIC).

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1736-1740
• /
• 2004

Since the application of relatively high levels of heavy metals in the compost poses a potential hazard to plants and animals, the content of heavy metals in the compost with animal manure is important to know if it is as a fertilizer. Measurement of heavy metals content in the compost by chemical methods usually requires numerous reagents, skilled labor and expensive analytical equipment. The objective of this study, therefore, was to explore the application of near-infrared reflectance spectroscopy (NIRS), a nondestructive, cost-effective and rapid method, for the prediction of heavy metals contents in compost. One hundred and seventy two diverse compost samples were collected from forty-seven compost facilities located along the Han river in Korea, and were analyzed for Cr, As, Cd, Cu, Zn and Pb levels using inductively coupled plasma spectrometry. The samples were scanned using a Foss NIRSystem Model 6500 scanning monochromator from 400 to 2,500 nm at 2 nm intervals. The modified partial least squares (MPLS), the partial least squares (PLS) and the principal component regression (PCR) analysis were applied to develop the most reliable calibration model, between the NIR spectral data and the sample sets for calibration. The best fit calibration model for measurement of heavy metals content in compost, MPLS, was used to validate calibration equations with a similar sample set (n=30). Coefficient of simple correlation (r) and standard error of prediction (SEP) were Cr (0.82, 3.13 ppm), As (0.71, 3.74 ppm), Cd (0.76, 0.26 ppm), Cu (0.88, 26.47 ppm), Zn (0.84, 52.84 ppm) and Pb (0.60, 2.85 ppm), respectively. This study showed that NIRS is a feasible analytical method for prediction of heavy metals contents in compost.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.6
• /
• pp.457-473
• /
• 1992

The first order wave equation over a double shelf has wind stresses on both coastal boundaries and wind stress curl forcing across the shelf. In the Yellow Sea, the effect of wind stress curl can be neglected as a forcing of shelf waves. The decay distance of Kelvin waves is much greater than that of continental shelf waves so that Kelvin waves are transmitted nearly intact through the northern embayment. The numerical method of characteristics has been modified to accomodate wave propagation of opposite directions. Using a little more realistic coastline, the wave model hindcast has been improved for current velocity, but hardly for sea level. It means that Kelvin waves, which mainly determine sea levels, are affected little by the change of bottom slope. For a better hindcast of sea level, input energy of Kelvin waves transmitted from the East China Sea is needed. The basic structure of downwind flows along the coasts and upwind flows along the trough supports the seasonal circulations driven by monsoon winds in the Yellow Sea.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.151-154
• /
• 2008

Purpose: Javals' rule is a commonly used formula for estimating total astigmatism from corneal astigmatism. Many researchers suggested a modication of Javals' rule. Therefore, we estimated the total astigmatism on the basis of measurements of corneal astigmatism and assessed the accuracy of Javals' rule. Methods: We estimated the total astigmatism on the basis of measurements of corneal astigmatism on 108 eyes of 54 subjects of koreans in their twenties. Results: The regression of the total astigmatism from corneal astigmatism is less than 1.25 of Javals' rule, but it was equivalent to Auger's modified Javals' rule. Conclusions: The regression equation for this study was as follows: Total Astigmatism=0.79 (Corneal Astigmatism)-0.49D${\times}$90.

• The Research Journal of the Costume Culture
• /
• v.25 no.5
• /
• pp.682-693
• /
• 2017

The purpose of the study was to compare two different MBTI personality types by evaluating the influence of perceived risk on brand and store loyalty and purchase intention. 340 questionnaires were used for the analysis. For statistical analysis, SPSS 20.0 and AMOS 20.0 were performed, and frequency tests, reliability analyses and Structural Equation Modeling were used. The results of SEM analysis, confirmed that one question of brand loyalty and one question of store loyalty were inappropriate for this study. Thus, these two questions were removed and the research model was modified. To determine the goodness of fit of the research model, convergent validity was tested. Most items fell into the goodness of fit, and the average coefficient was fulfilled. According to the results of a path coefficient analysis for the Judging type, perceived risk has a significant influence on brand loyalty and brand loyalty also affected store loyalty. Furthermore, brand loyalty and store loyalty have a significant effect on purchase intentions, but perceived risk did not affect brand loyalty for the Perceiving type. Brand loyalty influences store loyalty and purchase intentions, but store loyalty did not influence purchase intentions. As a result of this study, it is concluded that considering consumers' personality types is critical to developing strategies that enhance brand loyalty.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1463-1469
• /
• 2012

This paper has presented the influence of scaling theory on short channel effects of double gate(DG) MOSFET in subthreshold region. In the case of conventional MOSFET, to preserve constantly output characteristics,current and switching frequency have been analyzed based on scaling theory. To analyze the results of application of scaling theory for short channel effects of DGMOSFET, the changes of threshold voltage, drain induced barrier height and subthreshold swing have been observed according to scaling factor. The analytical potential distribution of Poisson equation already verified has been used. As a result, it has been observed that threshold voltage among short channel effects is grealty changed according to scaling factor. The best scaling theory for DGMOSFET has been explained as using modified scaling theory, applying weighting factor reflected the influence of two gates when scaling theory has been applied for channel length.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.2
• /
• pp.720-729
• /
• 1996

An analysis of convective boiling heat transfer for refrigerant mixtures is performed for an annular flow to investigate the degradation of the heat transfer rate. Annular flow is selected in this study because a great portion of the evaporator in the refrigeration and air conditioning system is known to be in the annular flow regime. Mass transfer effect due to composition difference between liquid and vapor is included in this analysis, which is considered to be one of driving forces for the mass transfer at the interface. Due to the concentration gradient at the interface the mass transfer is interfered, so is the evaporative heat transfer at the interface. The mass transfer resistance makes the interface temperature slightly higher and, as a result, the heat transfer coefficients decrease compared with those without mass transfer effects. The degradatioin of the heat transfer rate reaches its maximum at a certain composition. The composition difference between vapor core and vapor at the interface has a direct effect on the temperature difference between the vapor core and the interface and the degradation of the heat transfer rate. Correction factor $C_{F}$ for the mixture effects is added to the correlation for pure substances and the flow boiling heat transfer coefficients can be calculated using the modified equation.n.