• Journal of Korean Society of Steel Construction
• /
• v.30 no.2
• /
• pp.87-96
• /
• 2018

This study is aiming at investigating the ultimate behaviors and curling influence on the ultimate strength in high strength aluminum alloys (7075-T6) single shear two-bolted connections using finite element analysis. The validation of finite element analysis for predicting the ultimate behaviors was verified through the comparison between previous test results and analysis predictions. Strength reduction due to curling occurrence was estimated quantitatively. Parametric analyses with extended variables were conducted and the conditions of curling occurrence according to end distance and edge distance were suggested. Finally, modified equation was suggested considering curling influence on the ultimate strength of aluminum alloys 7075-T6 bolted connections.

• Journal of the Korean Society of Tobacco Science
• /
• v.28 no.2
• /
• pp.111-116
• /
• 2006

It is very important to add uniformly casing materials on tobacco for taste and flavor. However, analysis of casing materials was spent much time, effort and money. The object of this study was the development of a rapid method for the determination of glycerine, propylene glycol(PG), sucrose, glucose, fructose and water in the casing materials using the NIR transmittance method. Hundreds of calibration samples, with extended ranges (50%, 75%, 100%, 125%, and 150% of standard addition) in each constituent, were prepared in the casing materials at the various temperatures $(25^{\circ}C\;and\;30^{\circ}C)$. Calibration equation was developed by modified partial least square (MPLS) method using second derivative. The standard error of calibration and $R^2$ between added value and NIR estimated value results were $0.007{\sim}0.034\;and\;0.996{\sim}1.000$ for the casing sample set, respectively. The standard error of prediction and R2 between added value and NIR estimated value results were $0.010{\sim}0.034\;and\;0.997{\sim}1.000$ for the casing sample set, respectively. The analysis result was not different significantly between the NIR and added value. These results show that the NIR measurement system is an effective tool to ensure quality on the casing materials.

• Geotechnical Engineering
• /
• v.3 no.2
• /
• pp.29-40
• /
• 1987

This paper aims at investigating the characteristics of soil deformation by finite element method (FEM) coupling the cap model with the multi.purpose program developed by authors for the analysis of foundation displacement. The cap model as the constitutive equation has proved to be very useful to a partially saturated roils as well as rocks with high accuracy. As described in the Previous Paper (Park et al 1987) , there exist some difficulties in the determination of soil parameters in order to use the cap model at Present. However the authors have been studying to seek the method for the determination of the soil parameters from the laboratory results of conventional cylindrical triaxial test. Though the computer program advocated by foreign scholars has been kept secret, authors accomplished in performing the FEM analysis by the algorithm and program developed by authors for the cap model. Good results are obtained compared with those published already by Desai(1981) The main conclusions analyzed are as follows: 1. The cap model can be coupled with the multi.purpose computer program of authors bases on the Biot's consolidation theory without loss of generality. 2. Big difference appears in the settlement of center of the embankment between the cap modes and the modified Cam clay model in undrained conditions. The more study on which is more accurate should be performed in this respect.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.136-142
• /
• 2007

This paper proposes a new approach on nonlinear maneuvering target tracking. In this paper, proposed algorithm is the Kalman filter based on the adaptive interactive multiple model using the concept of predicted impact point and utilize modified Kalman filter regarding the error between measurement position and predicted impact point. The unknown target acceleration is regarded as an additional process noise to the target model, and each sub-model is characterized in accordance with the valiance of the overall process noise which is obtained on the basis of each acceleration interval. To compensate the decreasing performance of Kalman filter in nonlinear maneuver, we construct optional algorithm to utilize proposed method or Kalman filter selectively. To effectively estimate the acceleration during the target maneuvering, the rapid increase of the noise scale is recognized as the acceleration to be used in maneuvering target's movement equation. And a few examples are presented to show suggested algorithm's executional potential.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.230-236
• /
• 2013

This paper presents the numerical calculation for input impedance of a conductor located in the loss media by using the program with MATLAB. The input impedances of the conductor were numerically calculated with the moment of method. To increase an accuracy of results, the Galerkin's method which both the basic function and the weight function are the triangle function was applied. And by applying the modified image method, image sources of the conductor located in air were considered. According to the comparison between the current distributions at the conductor which were calculated with the MATLAB program and the NEC program, the reliability of the self-made program with MATLAB was obtained. In case of the conductor located in soil, which length are 1 m and 2 m, the input impedance were simulated as a function of both a conductivity and a frequency. Finally, input impedances and phases of the conductor located in soil were measured, and those results were compared with simulated results which calculated under the same conditions.

• The Korean Journal of Ecology
• /
• v.1 no.1
• /
• pp.17-23
• /
• 1977

Flowering dates of 389 plant species in the Hongneung Arboretum, Seoul, had been recorded from 1968 through 1975. The thermal analysis on the air temperature as the key factor determining the first flowering date, with climatological data obtained in the Arboretum, were undertaken by Nuttonson's Index (1948) and Lindsey & Newman's Index (1956). The results and conclusion in this study are as follow; Peak in the bell shape distribution curve of the species and first flowering dates, largely, was early May. Flower spans of most species were 10 to 20 days, neverthless, some species flower only a few days while others may stay flowering a hundred days even more. Increase-curves of summation temperature from early spring through late-summer showed almost the same mode in both Nuttonson;s Index (Tn) and Lindsey & Newman's Index (T1). These Indices manifested the exponential curve, increasing slowly at the beginning of spring chiefly but rapidly from the middle part of April. The equation of the linear relationahip between Tn and Tl as far as in thisstudy is as follow. Tl=230Tn It appears that the distribution of summation temperature, below Tn=400°C·day, affects the first flowering, even though it could be modified somehow by the distribution of precipitation, day length and others. Nuttonson's Index (Tn.f) and Lindsey & Newman's Index (Tl.f) upon the thermal amount first flowering dates have been respectively simulated as follow. Tn.f=θa + C Tl.f=230θa + 230C where θ is air temperature 10°C, a and C are a constant.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.981-987
• /
• 2010

The split Hopkinson pressure bar (SHPB) technique is extensively used to characterize material deformation behavior under high strain rate condition. In this study, the dynamic deformation behavior of aluminum 7075-T6 under a high strain rate and at a high temperature is investigated by using a modified SHPB set-up with the pulse shaper technique. The parameters used in the Johnson-Cook constitutive equation are determined by using the SHPB experimental results including the data on the effects of strain rate, temperature, strain hardening, and thermal softening of the material.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.6
• /
• pp.1385-1394
• /
• 1994

A three-dimensional numerical model of surface buoyant jets with variable density was established. The model uses fully nonlinear, time-dependent, three-dimensional, ${\sigma}$-transformed equations of motion and equation of heat transport. A semi-implicit numerical scheme in time has been adopted for computational efficiency. The model was applied for thermal jets discharging into a stagnant water and the simulated results were compared with a hydraulic experimental data set showing good agreement. Comparative studies of exchange coefficients and stability functions indicated that spatial variation of exchange coefficients should be considered and the existing stability functions should be modified to simulate surface buoyant jets accurately.

• Korean journal of food and cookery science
• /
• v.22 no.3 s.93
• /
• pp.282-290
• /
• 2006

This study was carried out to investigate the effects of modified starch, sugars and enzymatic hydrolysis with ${\beta}-amylase$ on extending the self-life of Injulmi, a Korean soft and glutinous rice cake, in terms of maintaining a soft texture. The Injulmi was prepared with or without kneading of waxy rice flour, NaCl and water mixture. The Injulmi was stored at -20, 4 and $20^{\circ}C$ and the hardness was measured to calculate the Avrami exponents during storage. The results showed that cold heading and enzymatic hydrolysis with ${\beta}-amylase$ before steaming of the waxy rice dough significantly extended the self-life on the basis of the Avrami equation. Among the various additives including different kinds of starches, sugars and polymannuronic acid, the addition of 1.5% tapioca starch, 8.0% of glucose or 3.0% of polymannuronic acid was also effective for delaying the retrogradation phenomena during storage. However, despite the effectiveness of these treatments, the Injulmi developed hardness within 2-3 days at $4^{\circ}C$ and within 4 days at $20^{\circ}C$ while storage at $-20^{\circ}C$ showed a storage stability that was maintained over x days. Sensory showed the Injulmi prepared with NOVA-0.005, GL-8.0 had a lower hardness than that of the other treatments.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.7-15
• /
• 2001

This paper describes the smoke filling process of a fire field model based on a self-developed SMEP (Smoke Movement Estimating Program) codo to the simulation of fire induced flows in the atrium space (SIVANS atrium at Japan) containing smoke radiation effect. The SMEP using PISO algorithm solves conservation equations for mass, momentum, energy and species, together with those for the modified k-$\varepsilon$ turbulence model with buoyancy term. Also it solves the radiation equation using the discrete ordinates method. The result of the calculated smoke temperature containing radiation effect has shown a better prediction than the result calculated by only convection effect in comparison with the experimental data. This seems to come from the radiation effect of $H_2$O and $CO_2$ gas under smoke productions. Thus, the consideration of the radiation effect under smoke in fire should be necessary in order to get more realistic result. Also the numerical results indicated that the smoke layer is developing at a rate of about 0.1 m/s. It would take about 450 seconds after starting the ultra fast fire of 560 kW that the smoke layer move down to 1.5m above the escape level.