• 제목/요약/키워드: Modified equation

검색결과 1,410건 처리시간 0.034초

하이드라진(N2H4) 아크젯 추력기의 수치적 모델링 (Numerical Modeling of Hydrazine-Fueled Arcjet Thruster)

  • 신재렬;이대성;오세종;최정열
    • 한국항공우주학회지
    • /
    • 제36권9호
    • /
    • pp.907-915
    • /
    • 2008
  • 하이드라진(N2H4) 아크젯 추력기의 열화학 유동장 해석을 위한 전산유체해석을 수행하였다. 열복사와 전기장이 고려된 압축성 유동해석을 위해서 RANS 방정식을 수정하여 사용하였다. 로렌츠 힘과 Ohm 가열효과를 고려한 Maxwell 방정식이 유동방정식과 결합되어 전기 방전으로 인한 전기장해석을 위해 이용되었다. 아크젯 추력기 내부에서 유동장은 충분히 고온상태이기에 화학평형 해석이 이용되었으며, 광학 두께를 이용한 열복사 모델이 유동방정식에 적용되었다. 계산 결과들은 아크젯 추력기유동이 동결유동에 비해 추력은 180%증가되며, 비추력은 200%가까이 상승됨을 보여준다. 또한 유동장 해석 결과들은 아크젯 추력기 내부의 열적 물리적 특성에 대한 이해를 돕는다.

큐벡시 스토커 소각로 2차원 비반응 유동장 수치해석 (A Numerical Study of the 2-D Cold Flow for a Qubec City Stoker Incinerator)

  • 박지영;송은영;장동순
    • 에너지공학
    • /
    • 제2권3호
    • /
    • pp.268-275
    • /
    • 1993
  • 수치해석 방법에 의해 큐백시의 스토커 소각로 유동장을 분석하였다. 수치모사의 변수는 큐백시의 스토커 소각로를 중심으로 한 5가지 내부 형상, 1차공기 속도, 2차공기 속도 및 주입각, 출구면적을 고려하였다. 검사체적에 기초한 Patankar의 유한차분 방법을 사용한 본 논문에서는 power-law scheme과 SIMPLEC 알고리즘을 사용했으며 난류 유동은 표준 k-e 모델을 이용했다. 소각로 유동장 분석을 위해서 재순환 영역의 크기, 난류 점성계수 및 이차공기의 질량분율 분포, 압력강하를 계산했다. 계산 결과는 물리적 의미에 잘 맞게 나타났으며, 큐백시의 스토커 소각로가 다른 내부 형상의 소각로에 비해 상부에 강한 난류를 가진 재순환 영역을 형성하였다.

  • PDF

Evaluation of Biogas Production Performance and Dynamics of the Microbial Community in Different Straws

  • Li, Xue;Liu, Yan-Hua;Zhang, Xin;Ge, Chang-Ming;Piao, Ren-Zhe;Wang, Wei-Dong;Cui, Zong-Jun;Zhao, Hong-Yan
    • Journal of Microbiology and Biotechnology
    • /
    • 제27권3호
    • /
    • pp.524-534
    • /
    • 2017
  • The development and utilization of crop straw biogas resources can effectively alleviate the shortage of energy, environmental pollution, and other issues. This study performed a continuous batch test at $35^{\circ}C$ to assess the methane production potential and volatile organic acid contents using the modified Gompertz equation. Illumina MiSeq platform sequencing, which is a sequencing method based on sequencing-by-synthesis, was used to compare the archaeal community diversity, and denaturing gradient gel electrophoresis (DGGE) was used to analyze the bacterial community diversity in rice straw, dry maize straw, silage maize straw, and tobacco straw. The results showed that cumulative gas production values for silage maize straw, rice straw, dry maize straw, and tobacco straw were 4,870, 4,032.5, 3,907.5, and $3,628.3ml/g{\cdot}VS$, respectively, after 24 days. Maximum daily gas production values of silage maize straw and rice straw were 1,025 and $904.17ml/g{\cdot}VS$, respectively, followed by tobacco straw and dry maize straw. The methane content of all four kinds of straws was > 60%, particularly that of silage maize straw, which peaked at 67.3%. Biogas production from the four kinds of straw was in the order silage maize straw > rice straw > dry maize straw > tobacco straw, and the values were 1,166.7, 1,048.4, 890, and $637.4ml/g{\cdot}VS$, respectively. The microbial community analysis showed that metabolism was mainly carried out by acetate-utilizing methanogens, and that Methanosarcina was the dominant archaeal genus in the four kinds of straw, and the DGGE bands belonged to the phyla Firmicutes, Bacteroidetes, and Chloroflexi. Silage maize is useful for biogas production because it contains four kinds of straw.

Evaluation of Bacterial Transport Models for Saturated Column Experiments

  • Ham, Young-Ju;Kim, Song-Bae;Kim, Min-Kyu;Park, Seong-Jik
    • 한국농공학회논문집
    • /
    • 제48권7호
    • /
    • pp.55-63
    • /
    • 2006
  • Bacterial transport models were evaluated in this study to determine the suitable model at describing bacterial transport in saturated column experiments. Four models used in the evaluation were: advective-dispersive equation (ADE) + equilibrium sorption/retardation (ER) + kinetic reversible sorption (KR) (Model I), ADE + two-site sorption (Model 2), ADE + ER + kinetic irreversible sorption (KI) (Model 3), ADE + KR + KI (Model 4). Firstly, analyses were performed with the first experimental data, showing that Model 4 is appropriate for describing bacterial transport. Even if Model 1 and 2 fit well to the observed data, they have a defect of not including the irreversible sorption, which is directly related to mass loss of bacteria. Model 3 can not properly describe the tailing observed in the data. However, further analysis with the second data indicates that Model 4 can not describe retardation of bacteria, even if the sorption-related parameters are varied. Therefore, Model 4 is modified by incorporating retardation factor into the model, resulting in the improved fitting to the data. It indicates that the transport model, into which retardation, kinetic reversible sorption, and kinetic irreversible sorption are incorporated, is suitable at describing bacterial transport in saturated column experiments. It is expected that the selected transport model could be applied to properly analyze the bacterial transport in saturated porous media.

밭 작물의 최적관개수준과 계획용수량 산정 (The Optimum Irrigation Level and the Project Water Requirement for Upland Crops)

  • 윤학기;정상옥;서승덕
    • 한국농공학회지
    • /
    • 제32권1호
    • /
    • pp.72-86
    • /
    • 1990
  • This study was carried out to get the basic information of irrigation plans for upland crops such as the optimum irrigation level and the project water requirement. Red peppers and cucumbers were cultivated in PVC pot lysimeters filled with 60cm deep clay loam soil. Four tensiometers were installed in each pot to measure the soil water pressure head. Six levels of irrigation were used. The results obtained from this study are summarized as follows: 1.The optimum irrigation level. The irrigation level of FC-PF2.7 was found to be the optimum level for both red pepper and cucumber with respect to the yield and the weight per fruit. In case of FC-PF2.7, total ET during the irrigation period were 1005.2mm for red pepper, and 429.6mm for cucumber, respectively. 2.soil moisture extraction patterns. Average soil moisture extraction patterns (SMEP)during the irrigation period were from 1st soil layer 43% : 32% : 16% : 9% for red pepper and 39% : 34% : 15% : 12% for cucumber, respectively. The extraction ratio of the upper soils showed very large values during the early stage of growth and decreased largely during the middle stage, and became larger in the last stage. 3.The project water requirement. Among the reference crop evapotranspiration(ETo) computation methods presented by FAO, the Penman method was found to be the best. The effective rainfall was computed by a modified USDA-SCS curve number equation. Availability ratios of the total rainfall during irrigation season were 59.2% for red pepper and 48.9% for cucumber, respectively. Net project water requirement of design year are 837.3mm for red pepper. and 502.Smm for cucumber, respectively.

  • PDF

벽면에 근접한 사각주 후면의 와류 유동장 수동제어 (Passive Control of the Vortex Shedding behind a Rectangular Cylinder Near a Wall)

  • 이보성;김태윤;이도형;이동호
    • 한국항공우주학회지
    • /
    • 제32권6호
    • /
    • pp.16-22
    • /
    • 2004
  • 지면엔 근접한 사각주 후면에서 발생하는 비정상 와류 배출은 지상 운송체, 교량, 건물 등의 항력 증가뿐 아니라, 동안정성에도 큰 영향을 미친다. 비압축성 평균 Navier-Stokes 방정식에 수정된 ${\varepsilon}-SST$ 난류 모델을 적용하여 사각주 하부와 지면과의 간극 유동을 해석하였다. 사각주 후류에서 와류가 발생하는 경우에는 간극에서의 평균 최대 속도가 억제된 경우에 비하여 높으며, 또한 최대 속도의 위치 또한 사각주 하부에 근접한 것을 확인하였다. 본 연구에서는 사각주 하부에 수평, 수직의 펜스를 설치하는 수동 제어기법을 적용하여 사각 주 후류의 와류 배출용 억제할 수 있다.

Coupling of Electromagnetic and Electrostatic Waves in Inhomogeneous Plasmas

  • Kim, Kyung-Sub;Kim, Eun-Hwa;Lee, Dong-Hun
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2003년도 한국우주과학회보 제12권2호
    • /
    • pp.82-82
    • /
    • 2003
  • It is well known that electromagnetic (EM) waves are mode converted to electrostatic (ES) waves in inhomogeneous plasmas. We examine this issue in a three-dimensional multi-fluid numerical model. First, we derive a set of coupled linear wave equations when a one-dimensional inhomogeneous density profile is assumed in a cold and collisionless plasma. The massive ions are considered as fixed because we are interested in high frequency waves in plasmas. It is shown that the EM mode satisfies the 0th order modified Bessel equation near the resonant region where the frequency matches the local electron plasma frequency. It is expected that the EM waves are coupled and damped to the ES waves owing to the logarithmic singular behavior at such resonances. Second, we numerically test the same case in a 3-D multi-fluid model. An impulsive input is assumed to excite EM waves in the inhomogeneous 3-D box model. The wave spectra of electric and magnetic fields are presented and compared with the analytical results. Our results suggest that the EM energy is irreversibly converted into the ES energy wherever the resonant condition is satisfied. Finally we discuss how the mode conversion appears in both electric and magnetic fields by analyzing time histories of each component. We also compare our results with MHD wave coupling. It is numerically confirmed in this study that the coupling of EM and ES waves is similar to that of compressional and transverse MHD waves.

  • PDF

시변 지연시간을 갖는 이산 구간 시변 시스템의 안정조건 (Stability Condition for Discrete Interval Time-varying System with Time-varying Delay Time)

  • 한형석
    • 한국항행학회논문지
    • /
    • 제20권5호
    • /
    • pp.475-481
    • /
    • 2016
  • 본 논문에서는 상태변수에 시변 지연시간이 있는 선형 이산 구간 시변 시스템의 안정조건을 새롭게 제안한다. 고려한 시스템은 지연 없는 상태변수에 대한 시스템 행렬과 지연 상태변수에 대한 시스템 행렬이 시변 구간 행렬로 표현되며, 지연시간도 구간에 대하여 시변인 특성을 갖는다. 제안된 안정조건은 리아프노프 안정 이론을 이용하여 유도되며, 매우 간단한 부등식의 형태로 표현된다. 본 논문에서는 기존의 시불변 구간 행렬의 안정성 문제를 시변 구간 행렬의 안정성 문제로 확장하고, 기존에 발표된 결과를 포함하는 강력한 안정조건이 유도된다. 이 안정조건의 유도과정에서는 복잡한 선형행렬부등식 혹은 리아프노프 방정식의 상한 해 한계를 구하지 않아도 된다. 또한, 기존의 결과들과의 비교를 통하여 제안된 안정조건이 많은 기존 안정 조건들을 포함할 수 있음을 보인다. 기존 수치예제를 일반적인 형태로 확장하였고 이에 대하여 새로운 안정조건의 확장성과 효용성을 확인한다.

Removal of different anionic dyes from aqueous solution by anion exchange membrane

  • Khan, Muhammad Ali;Khan, Muhammad Imran;Zafar, Shagufta
    • Membrane and Water Treatment
    • /
    • 제8권3호
    • /
    • pp.259-277
    • /
    • 2017
  • Adsorption is a widely used technique for the removal of dyes from wastewaters by variety of adsorbents. In this work, the main focus is on the potential assessment of anion exchange membrane for the removal of different dyes using batch system and investigation of experimental data by applying various kinetic and thermodynamic models. The removal of anionic dyes i.e., Eosin-B, Eriochrome Black-T and Congo Red by anion exchange membrane BII from aqueous solution was carried out and effect of various parameters such as contact time, membrane dosage, temperature and ionic strength on the percentage removal of anionic dyes was studied. The experimental data was assessed by kinetic models namely pseudo-first-order, pseudo-second-order, Elovich liquid film diffusion, Bangham and the modified Freundlich models equation have been used to analyze the experimental data. These results indicate that the adsorption of these anionic dyes on BII follows pseudo-second-order kinetics with maximum values of regression coefficient (0.992-0.998) for all the systems. The adsorption of dyes was more suitable to be controlled by a liquid film diffusion mechanism. The adsorptive removal of dye Eosin-B and Eriochrome Black-T were decreased with temperature and thermodynamic parameters such as free energy (${\Delta}G^o$), enthalpy (${\Delta}H^o$) and entropy (${\Delta}S^o$) for adsorption of dyes on membrane BII were calculated at 298 K, 308 K and 318 K. The values of enthalpy and entropy were negative for EB and EBT representing that the adsorption of these dyes on BII is physiosorptive and exothermic in nature. Whereas the positive values of enthalpy and entropy for CR adsorption on BII, indicating that its adsorption is endothermic and spontaneous in nature. It is evident from this study that anion exchange membrane has shown good potential for the removal of dyes from aqueous solution and it can be used as adsorbent for dues removal on commercial levels.

금속담지 활성탄의 인산염 흡착특성 (Phosphate Adsorption on Metal-Impregnated Activated Carbon)

  • 황민진;황유식;이원태
    • 대한환경공학회지
    • /
    • 제37권11호
    • /
    • pp.642-648
    • /
    • 2015
  • 수계에 존재하는 인산염의 흡착제거 용량을 향상시키기 위하여, 참나무 기반 활성탄을 제조하였으며, 이때 $Fe^{3+}$$Al^{3+}$이온의 혼합물을 흡착제 표면에 담지 하였다. 금속담지 활성탄의 인산염의 흡착용량은 금속이온으로 표면을 개질 하지 않은 활성탄에 비해 약 8배 높게 나타났다. 흡착평형량은 흡착반응의 온도가 증가할수록 증가하였으며, Langmuir 흡착등온식의 경향과 일치하였다. 제조된 금속담지 활성탄의 인산염 흡착제거공정은 흡열의 자발반응으로 진행되었음을 확인하였다. 흡착공정의 거동과 제거속도를 평가하기 위하여, 세공확산모델을 통해 내부 확산계수를 산출하였으며, 이는 실험결과와 매우 일치하였다.