본 연구에서는 국내에서 개발된 Full-Scale 포장가속시험기(HAPT; Hanyang Accelerated Pavement Tester)를 소개하고, 이 시험의 시험운영과 함께 개질아스팔트 혼합물과 일반 밀입도 아스팔트 혼합물의 소성변형 저항성 비교 연구를 수행하였다. 포장가속시험은 일반 밀입도와 3종의 개질아스팔트 각각에 대해 3가지 온도조건(25-30, 40, $50^{\circ}C$)에서 소성변형 저항성을 평가하였으며, 이 평가 결과들은 DSR실험등 바인더의 실내실험 결과들과도 비교하였다. 포장가속시험을 통한 소성변형 발생량을 분석한 결과, 시험 대상이 된 모든 개질아스팔트 구간에서 일반 밀입도에 비해 소성변형 저항성이 큰 것으로 나타났다. 특히 고온조건에서는 그 차이가 매우 크게 나타났다. 일반 밀입도 아스팔트포장을 대상으로 포장온도 증가에 따른 소성변형 저항성을 분석한 결과 온도가 어느 이상 되면 소성변형 저항성이 급격히 떨어짐을 알 수 있었다. 또한 소성변형에 관련한 중요한 인자로 제시되는 $G^*/sin{\delta}$는 소성변형 저항성을 잘 나타내고 있는 것으로 나타났다. 반면에 회복탄성계수는 소성변형 저항성을 나타내는 인자로 바람직하지 않음도 확인하였다.
During recent years researchers performed large effort to increase the service life and asphalt stability of the roads against traffic loads and weather conditions. Investigations carried out in various aspects such as changes in gradation, addition of various additives, changes in asphalt textures and etc. The objective of this research is to evaluate the advantages of adding recycled glass powder (RGP), Crumb Rubber (CR), styrene-butadiene rubber (SBR) and styrene butadiene styrene (SBS) to base bitumen with grade of 60/70 for modification of asphalt concrete. Initial studies conducted for determining the physical properties of bitumen and modifiers. A series of asphalt concrete samples made using various combinations of RGP, CR, SBR, SBS and base bitumen. All samples tested using Indirect Tensile Strength (ITS), Indirect Tensile Strength Modulus (ITSM) and Marshall Stability Tests. The new data compared with the results of control samples. The results showed that replacing RGP with known polymers improved ITS and ITSM results considerably. Also the Marshall Stability of modified mixtures using RGP is more than what is found for the base blend. Ultimately, the new RGP modifier had a huge impact on pavement performance and results in high flexibility which can be concluded as high service life for the new modified asphalt concrete.
PURPOSES : This study evaluated the field applicability and laboratory performance of glass fiber-reinforced asphalt (GFRA) mixtures. METHODS : The general hot-mix asphalt (HMA) and GFRA mixtures were paved in five sites, including three national highways, one express highway, and an arterial road, to evaluate field applicability and durability. The plant mixing and construction method for the GFRA were similar to those for the general HMA. The lab performances of the field samples were relatively compared through the mechanical measures from the Marshall stability, indirect tensile strength, and dynamic stability. The field performance was surveyed after a year. RESULTS : The lab tests verified the superior lab performances of the GFRA compared to the general HMA. The Marshall stability of the GFRA increased for about 128% of the general HMA. The indirect tensile strength of the GFRA was 115% greater than that of the general HMA. The dynamic stability of the GFRA resulted in 16,180 reps/mm, which indicated that high rut resistance may be expected. No noticeable defects, such as cracks or deformation, were observed for the GFRA sections after a year. CONCLUSIONS : The lab tests and field survey for the five GFRA sites resulted in superior performances compared to the general HMA. The relatively low-cost GFRA, which required no pre-processing procedures, such as polymer modification, may be a promising alternative to the polymer-modified asphalt mixtures. The long-term performance will be verified by the superior field durability of the GFRA in the near future.
아스팔트는 노화에 따라 물리적 특성변화가 일어난다. 하지만 같은 수준으로 노화시킨 아스팔트 혼합물들임에도 골재와 결합재 등에 따라 서로 다른 강성이나 취성을 보인다. 이는 노화에 의한 바인더 특성 변화의 차이에 기인한 것인데 이와 같이 혼합물 내에서 바인더의 물리적 특성 변화 차이에 영향을 주는 요인에 대한 연구는 별로 없다. 따라서 본 연구에서는 아스팔트 혼합물의 노화 후추출한 바인더의 물리적 특성을 측정하고 물성 차이에 영향을 미치는 요인을 분석하였다. 폴리머 3종류와 골재 두 종류, 두 가지 입도, 두 종류의 아스팔트를 사용하여 32종류의 혼합물을 제조하고, 이를 장 단기 노화 처리하였다. 각 혼합물의 노화 후 Abson recovery 방법으로 바인더를 추출 회생하고 바인더 물성 시험(침입도, 동점도, 절대점도)을 수행하였다. 이를 SAS를 이용하여 통계 분석하였다. 바인더 시험에서 골재 종류와 폴리머가 노화시 물성변화에 차이를 가져오는 심각한 요인임을 알 수 있었고, 입도는 점도 변화에 큰 영향을 미치는 인자인 것임을 확인할 수 있었다. 본 연구 결과, 혼합물 내의 바인더 물성은 골재 종류, 입도, 개질제의 종류, 바인더의 종류 등의 다양한 요인에 의해 많은 영향을 받는 다는 것을 알 수 있었다.
본 연구는 아스팔트 덧씌우기 포장에 야기되는 반사균열 실내 시험을 통해 여러 보강된 혼합물의 반사균열 저항성에 따른 피로수명을 추정하기 위해 수행되었다. 아스팔트 개질재로는 LDPE, SBS 및 카본블랙을 이용하였고 보강재로는 합성섬유(PF), 비닐(PV), 그리드 (GG)를 이용하였다. 공시체 몰드 바닥에 보강재를 미리 깐후 배합설계를 통해 얻은 아스팔트 혼합물을 부어 공시체를 제조하였다. 반복하중 하에서 균열이 있는 시멘트 콘크리트 위에 부착된 아스팔트 콘크리트 공시체 하단의 수평변위를 측정하여 각 혼합물별 균열지연에 따른 반사균열 피로수명을 추정하였다. 본 연구의 반사균열 실험 결과를 토대로 균열진전에 따른 각 혼합물별 피로수명에 대하여 이론적인 예측식을 개발 제안하였으며 예측식에 의한 추정치와 실측치와의 상관관계가 상당히 높게 ($r^2=0.95$이상) 나타났다.
Cold-mixed asphalt mixture is a widely recommended asphalt pavement materials with potentially economic and environmental benefits. Due to the reduction of natural non-renewable mineral resources, powder minerals with similar properties are considered as new mineral fillers in asphalt mixtures. This study explored the feasibility of using cement to replace natural limestone powder (LP) in emulsified asphalt concrete modified by styrene-butadiene styrene copolymer. The experimental tests, including compressive strength, Marshall stability as well as moisture susceptibility test, were used to investigate the mechanical properties, the Marshall stability, flow value, as well as the moisture damage. In addition, the influence of material composition on the performance of asphalt concrete is explained by the microstructure evolution of the pore structure, the interface transition zone (ITZ), and the micromorphology. Due to mineralogical reactivity of cement, its replacement part of LP improved the mechanical properties, Marshall stability, but it will reduce the moisture susceptibility and flow value. This is because with the increase of the cement substitution rate, the pore structure of the asphalt concrete is refined, the width of ITZ becomes smaller, and the microstructure is more compact. In addition, asphalt concrete with a larger nominal particle size (AC-16) has relatively better performance.
폼드아스팔트를 이용한 현장 상온 재생아스팔트 혼합물에 대한 배합설계법이 아이오아 주 교통국에서 사용하기 위해 개발되었다. 상온 재생 폼드아스팔트 혼합물의 배합설계를 위한 실내시험절차를 개선하기 위하여 배합설계에 영향을 미치는 중요한 배합설계변수들을 결정하여 상온 재생 폼드아스팔트 혼합물의 특성을 반영할 수 있는 새로운 배합설계절차를 개발하였다. 개발된 배합설계법의 검증을 위한 한 가지 방법으로 상온 재생 폼드아스팔트 혼합물의 동탄성계수를 측정하였다. 본 연구에서는 새로운 simple performance testing 장비를 이용한 상온 재생 폼드아스팔트 혼합물의 동탄성계수 측정을 위한 표준시험절차를 정립하고, 7가지 재생 아스팔트 골재를 사용하여 생산된 상온 재생 폼드아스팔트 혼합물의 동탄성 계수를 측정하여 마스터곡선을 작성하였다. 또한 재생 아스팔트 골재의 특성이 상온 재생 폼드아스팔트혼합물의 동탄성 계수에 미치는 영향을 조사하였다. 3가지 온도와 6가지의 하중주기에서 측정된 상온 재생 폼드아스팔트 혼합물의 동탄성계수는 7가지 재생 아스팔트 골재에서 일관된 값을 나타내었으며, 작성된 상온 재생 폼드아스팔트 혼합물의 마스터곡선은 가열 아스팔트 혼합물의 마스터곡선에 비해 하중주기에 대해 덜 민감한 것으로 평가되었다. 저온에서는 재생 아스팔트 골재의 잔골재 함유량이 상온 재생 폼드아스팔트 혼합물의 동탄성계수에 영향을 미치는 것으로 나타났으며, 고온에서는 재생 아스팔트 골재의 잔류 아스팔트 특성이 상온 재생 폼드아스팔트 혼합물의 동탄성계수에 영향을 미치는 것으로 나타났다.
최근 국내에서는 교면포장의 파손에 따른 교량 바닥판의 열화 및 운전자 안정성의 문제가 대두되고 있다. 기존 아스팔트 재료는 교량에서 발생하는 열악한 환경에 적용하기에는 한계가 있어 교량 바닥판을 보호하고 상대적으로 큰 처짐에 대하여 장기간 견딜 수 있는, 피로저항성이 우수한 고내구성 교면포장 아스팔트 혼합물의 개발이 필요하게 되었다. 이에 SBS 첨가물과 첨가제를 사용하여 생산성 및 작업성이 우수하고 피로균열저항성이 뛰어난 교면포장용 아스팔트 바인더를 개발하였다. 새로운 아스팔트 바인더는 회전점도시험 (RV test), 인화점시험 (Flash point test), 동적전단시험(DSR test), 저온빔시험(BBR test) 등을 통하여 PG 70-34의 공용등급으로 확인되었다. 본 연구에서 개발된 아스팔트 바인더를 사용한 혼합물의 공용성을 평가하기 위하여, 피로시험, 휠트래킹시험, 수분손상시험 등을 실시하였으며 실물크기의 윤하중시험을 통하여 소성변형 저항성 및 피로균열 저항성에 대하여 평가하였다. 실내공용성 시험을 통하여 교면포장용 아스팔트 혼합물이 SBS 개질 혼합물에 비하여 3배 이상의 피로수명을 가졌다. 또한, 윤하중시험에서도 소성흐름이 발생하지 않았고, 피로균열은 250,000회 이상을 재하하여도 PG 64-22 혼합물의 38% 밖에 나타나지 않았다.
본 논문은 가열 페타이어 재활용 아스팔트 혼합물의 습윤과 동결융해 저항성에 대한 시험결과를 나타내고 있다. 재래식 아스팔트 혼합물과 페타이어 재활용 아스팔트의 기계적 특성을 비교하기 위하여 각기 다른 습윤 조건과 동결 융해 횟수하에서 시험이 수행되었다. 또한, 두 혼합물에 대한 최적 아스팔트 함량을 결정하기 위하여 마샬배합설계가 우선 수행되었다. 본 연구에서 수행된 시험결과에 의하면 페타이어 재활용 아스팔트 혼합물의 습윤과 동결-융해 저항성이 재래식 아스팔트 혼합물보다 우수함을 나타내었다. 따라서 향후 도로포장 재료로의 페타이어 재활용은 습윤과 동결융해로 인한 피해를 최소화할 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.