References
- AIPCR and PIARC. (2002) "old In-Place Recycling of Pavements with Emulsion or Foamed Bitumen." Association Mondiale de la Route (AIPCR) and World Road Association (PIARC) Draft Report, Version 3.1A.
- ASTM. (2003). "Standard Test Method for Recovery of Asphalt from Solution by Abson Method." ASTM D 1856-95a, American Society for Testing and Materials, West Conshohocken, PA.
- ASTM. (2006). "Standard Test Method for Penetration of Bituminous Materials." ASTM D 5, American Society for Testing and Materials, West Conshohocken, PA.
- AASHTO. (2007) 'Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures (HMA)." TP 62-07, American Associate of State Highway and Transportation Offices, Washington D.C.
- AASHTO (2001). "Bulk Specific Gravity of Compacted Bituminous Mixtures Using Saturated Surface-Dry Specimens." AASHTO T 166, American Associate of State Highway and Transportation Offices, Washington D.C.
- Bonnaure, F., Gest, G., Gravois, A., and Uge, P. (1977) "A New Method of Predicting the Stiffness of Asphalt Paving Mixtures." Proceedings of Association of Asphalt Paving Technologists, Vol. 46, pp. 64-100.
- Bonaquist, R. F., Christensen, D. W. and Stump, W. (2003) "Simple Performance Tester for Superpave Mix Design Development and Evaluations." Transportation Research Record, NCHRP Report 513.
- Brown, E. R., Prowell, B. Cooley, A., Zhang, J., and Powell, B. (2004). 'Evaluation of Rutting Performance at the 2000 NCAT Test Track." Journal of the Association of Asphalt Pavement Technologist, Volume 73, pp. 287-336.
- Birgisson, B., Roque, R., Kim, J. and Pham, L. V.(2004) "The Use of Complex Modulus to Characterize the Performance of Asphalt Mixtures and Pavements in Florida." Final Report, 4910-4501-784-12, Florida Department of Transportation.
- Clyne, T. R., Li, X., Marasteanu, M. O., and Skok, E. L. (2003) 'Dynamic Modulus and Resilient Modulus of Mn/Road Asphalt Mixtures." Final Report, MN/RC-2003-09, Minnesota Department of Transportation.
- Drescher, A., Newcomb, D. E., and Zhang, W. (1997) "Interpretation of Indirect Tension Test Based on Viscoelasticity." Transportation Research Record 1590, TRB, National Research Council, Washington, D. C., pp 45-52.
- Ekingen, E. R. (2004). 'Determining Gradation and Creep Effects in Mixtures Using the Complex Modulus Test." Thesis of Mater Degree, University of Florida.
- Guide for Mechanical-Empirical Design of New and Rehabilitated Pavement Structures. NCHRP Project 1-37A, www.trb.org/mepdg/. Accessed March 3, 2008.
- Kim, Y. and Lee, H. (2006) 'Development of Mix Design Procedure for Cold In-Place Recycling with Foamed Asphalt." Journal of Materials in Civil Engineering, ASCE, Vol. 18, No 1, pp.166-124.
- Kim, Y., Lee, H, and Heitzman, M. (2007) 'Validation of New Mix Design Procedure for Cold In-place Recycling with Foamed Asphalt for Iowa Department of Transportation." Journal of Materials in Civil Engineering, ASCE, Vol. 19, No 11, pp. 994-1000.
- Lee, H. and Kim, Y. (2003) 'Development of a Mix Design Process for Cold In-Place Rehabilitation using Foamed Asphalt." Final Report, Iowa Highway Research Board, Iowa Department of Transportation.
- Lundy, J. R., Sandoval-Gil, J., Brickman, A. and Patterson, B. (2005) "Asphalt Mix Characterization Using Dynamic Modulus and APA Testing" Final Report, FHWA-OR-RD-06-09, Oregon Department of Transportation and Federal Highway Administration.
- Marquis, B., Bradbury, R. L., Colson, S., Malick, R. B., Nanagiri, Y. B., Gould, J. S., O'Brien, S. and Marshall., M. (2003) "Design, Construction and Early Performance of Foamed Asphalt Full Depth Reclaimed (FDR) Pavement in Maine." TRB 82nd Annual Meeting (CD-ROM), Transportation Research Board, Washington. D.C.
- Stroup-Gardiner, M. and Newcomb, D. E. (1997) 'Investigation of Hot Mix Asphalt Mixtures at MnRoad." Final Report 97-06, Minnesota Department of Transportation.
- Tran, N. H. and Hall, K. D. (2006) 'Evaluation Protocols for Dynamic Modulus for Hot Mix Asphalt." TRB 85th Annual Meeting (CD-ROM), Transportation Research Board, Washington. D.C.
- Thomas, T. W. and Richard, W. M. (2007). "Mechanistic-Empirical Design Guide Modeling of Asphalt Emulsion Full Depth Reclamation Mixes." TRB 86th Annual Meeting (CD-ROM), Transportation Research Board, Washington, D.C.
- Williams, M. L., Landel, R. F. and Ferry, J. D. (1955). "The Temperature Dependence of Relaxation Mechanism in Amorphous Polymers and other Glass Forming Liquids." Journal of the American Chemical Society, Vol. 77, pp 3701-3706. https://doi.org/10.1021/ja01619a008
- Witczak, M. W. and Rott, R. E. (1974) "Summary of Complex Modulus Laboratory Test Procedures and Results." STP 561, American Society for Testing and Materials, pp 67-94.
- Witczak, M. W., Kaloush, K., Pellinen, T., El-Basyouny, M. and Von Quintus, H. (2002). "Simple performance test for Superpave Mix Design." NCHRP Rep. No. 465, Transportation Research Board, Washington D.C.
- Zhang, W., Drescher, A. and Newcomb, D. E. (1997). 'Viscoelastic Behavior of Asphalt Concrete in Diametral Compression." Journal of Transportation Engineering, ASCE, Vol. 123, pp495-502. https://doi.org/10.1061/(ASCE)0733-947X(1997)123:6(495)