• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2000
• /
• pp.372-380
• /
• 2000

Seismic forces for member design of bridges may be determined by modifying elastic member forces induced by design earthquakes using appropriate response modification factors according to national design code of bridges. Modeling of soil/foundation system is one of the critical parameter in the process of elastic seismic analysis of bridge system which greatly affects on the analysis results. In this paper, a simplified modelling procedure of soil/foundation system which gives practically reasonable results is presented and its applicability has been validated through example bridge. Based on the results, it has been shown that the procedure is acceptable in modelling soil/foundation system for practical seismic analysis of bridges.

• International journal of advanced smart convergence
• /
• 제6권4호
• /
• pp.1-8
• /
• 2017

In this work, the effects of fairly influential factors on performance of vacuum system, such as constant pressure and outgassing effect were simulated to propose the optimum design factors. Outgassing effects of selected vacuum materials on the vacuum characteristics were simulated by the $VacSim^{Multi}$ simulation tool. This investigation examined the feasibility of reliably simulating the outgassing characteristics of common vacuum chamber materials (aluminum, copper, stainless steel, nickel plated steel, Viton A). The optimum design factors for vacuum systems were suggested based on the simulation results. And, the effects of throttle valve applications on vacuum characteristics were also simulated to obtain the optimum design model of variable conductance on high vacuum system. Simulated vacuum characteristics of the proposed modelling were agreed with the observed experimental behaviour of real systems. Pressure limit valve and normally on-off control valve were schematized as the modelling of throttle valve for the constant process-pressure. Simulation results were plotted as pump-down curve of chamber and variable conductance of throttle valve. Simulated behaviors showed the applications of throttle valve sustained the process-pressure constantly, stably, and reliably.

• 한국정보과학회논문지:데이타베이스
• /
• 제30권3호
• /
• pp.237-251
• /
• 2003

이 논문에서는 비디오 데이타의 논리적 구조와 의미적 내용을 효과적으로 검색하기 위한 비디오 검색 시스템을 제안한다. 제안하는 검색 시스템은 비정형화된 비디오 데이타를 원시 데이타 계층, 내용 계층 그리고 키프레임 계층의 세 계층으로 구성하는 계층화된 모델링을 사용한다. 계층화된 모델링에 존재하는 내용 계층은 비디오 데이타에 대한 논리적인 계층 구조와 의미적 내용을 표현한다. 제안하는 검색 시스템은 모델링에 따라 텍스트 기반의 검색은 물론 시각적인 특징 기반의 유사도 검색을 지원한다. 또한 시공간 관계에 기반한 의미적 내용 검색과 유사도 검색을 지원한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.213-219
• /
• 2000

In this work, it has been predicted the thermal performance of the engine cooling system in cases of stationary mode, constant speed mode, city-drive mode, and hill-climb mode by theoretical modeling of each component and numerical analysis. The modelling components are engine, radiator, heater, thermostat, water-pump, and cooling-fan. And also it has been developed the simulation program that can be used in case of design and system configuration changes. The comparison has not been made to verify the results of this work with experimental data, but the overall tendencies were agreed well with those of actual situation in four modes.

• 한국기계기술학회지
• /
• 제13권3호
• /
• pp.73-79
• /
• 2011

In this study, an analytical realization of end-milling system was introduced using recursive parametric modeling analysis. Also, the numerical mode analysis of end-milling system with different conditions was performed systematically. In this regard, a recursive least square modelling algorithm and the natural mode for real part and imaginary one was discussed. This recursive approach (RLSM) can be adopted for on-line end-milling identification. After experimental practice of the end-milling, the end-milling force was obtained and it was used for the calculation of FRF (Frequency response function) and mode analysis. Also the FRF was analysed for the prediction of a end-milling system using recursive algorithm.

• 한국학교수학회논문집
• /
• 제14권4호
• /
• pp.423-442
• /
• 2011

연구의 목적은 ICME(2008,Mexico) 모델링 TSG21에서 논의한 모델일의 두 과제 설정 MMa, MeA이 학교수학에 효율적으로 적용이 될 수 있는지를 알아보는데 있다. 이 실험에서 수학과 교육과정에 적용할 수 있는 몇 가지 중요한 점을 발견했는데, 첫째는 MMa집단이 통제집단 IPS에 모델링 문항에서 성취도에 우의미한 차이를 보였고, 정보처리 문항에서도 좋은 성취수준을 보였다. 다시 말하면 모델링 MMa, MeA 교육이 가능하게 현행 학교 문제 해결 또는 개념 학습에 포함이 되고 더욱 발전 되는 시스템을 가질 수 있다. 둘째는 실험집단의 학생들이 생성한 모델링 처음 3단계 상황분석, 수학질문 구성, 모델설정에서 독특한 발견전략을 사용하였고 후반 2단계에서도 전통적 IPS 문제해결과 좋은 연결성을 보였다. 또, 실험집단 MMa, MeA 학생들이 개념적 시스템의 구성과정을 잘 이해했으며 Lesh & Sriraman(2005a, 2005b)의 개념적 시스템의 구성을 뒷받침 해 주었다. 셋째는 과제설정 MMa, MeA 간에 모델링의 사고행동인 수학적 상황 센스를 만들기(S), 창조하기(C), 확장하기(E), 재정의하기(RF)가 교실에서 활발하게 일어났다는 점이다. 따라서 Pollak등이 제언한 모델링 활동은 현행 IPS 활동과 의미 있게 교류 될 수 있다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.83-88
• /
• 1995

In this paper, the solid modeller suitable for PC was developed for Top-down 3-D representation and analysis of fixed offshore structures. Also solid modelling and hidden line removal were conducted in order to visualize the offshore structures based on the scan line z-buffer algorithm.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.17-24
• /
• 1988

This paper describes a neural network modelling of a vertebrate retina using a discrete-time and discrete-space approach based on neuro-anatomical data, and the computer simulations of the model which approximate the frog/amphibian negro-physiological data. It then compares them and describes how such a model can be beneficially used for confirming the hypothesis of a given neural system and further predict yet unknown experimental data.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.368-373
• /
• 1998

This paper presents a GA-based fuzzy modelling scheme of nonlinear systems. The fuzzy model is a type of the Sugeno-Tagaki's fuzzy model whose consequence parts are described by a linear continuous dynamic equation as subsystem of a nonlinear system. The centers and width of the membership functions of the fuzzy sets defined over the input space and the orders and parameters of subsystems in the consequence parts are adjusted by a genetic algorithm. The effectiveness of the proposed method is verified

• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.633-640
• /
• 2001

Statement of problem. Relatively low success rate of root analogue implant system was supposed to be due to the time duration between extraction and implant installation. The use of three-dimensional computer tomography and the reconstruction of objects using rapid prototyping methods would be helpful to shorten this time. Purpose. This aim of this study was to evaluate the application possibility of the 3-dimensional computer tomography and the rapid prototyping to root analogue implants. Material and methods. Ten single rooted teeth were prepared. Width and height of the teeth were measured by the marking points. This was followed by CT scanning, data conversion and rapid prototyping model fabrication. 2 methods were used; fused deposition modelling and stereolithography. Same width and height of this models were measured and compared to the original tooth. Results. Fused deposition modelling showed an enlarged width and reduced height. The stereolithography showed more exact data compared with the fused deposition modelling. Smaller standard deviation were recorded in the stereolithographic method. Overall width error from tooth to rapid prototyping was 7.15% in fused deposition modelling and 0.2% in stereolithography. Overall height showed the tendency of reducing dimensions. Conclusion. From the results of this study, stereolithography seems to be very predictable method of fabricating root analogue implant.