• Nuclear Engineering and Technology
• /
• v.26 no.3
• /
• pp.401-410
• /
• 1994

Validation study of two radionuclide migration models for single fracture developed in geologic medium the hydrodynamic dispersion diffusion model(HDDM) and the channeling dispersion diffusion model(CDDM), was studied by migration experiment of tracers through an artificial granite fracture on the labolatory scale. The tracers used were Uranine and Sodium lignosulfonate know as nonsorbing material. The flow rate ranged 0.4 to 1.5 cc/min. Related parameters for the models were estimated by optimization technique. Theoretical breakthrough curves with experimental data were compared. In the experiment, it was deduced that the surface sorption for both tracers did not play an important role while the diffusion of Uranine into the rock matrix turned out to be an important mass transfer mechanism. The parameter characterizing the rock matrix diffusion of each model agreed well The simulated result showed that the amount of flow rate could not tell the CDDM from the HDDM quantitatively. On the other hand, the variation of fracture length gave influence on the two models in a different degree. The dispersivity of breakthrough curve of the CDDM was more amplified than that of the CDDM when the fracture length was increased. A good agreement between the models and experimental data gave a confirmation that both models were very useful in predicting the migration system through a single fracture.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.14 no.2
• /
• pp.110-116
• /
• 2003

Background and Objectives : Laryngeal cancer discrimination using voice signals is a non-invasive method that can carry out the examination rapidly and simply without giving discomfort to the patients. n appropriate analysis parameters and classifiers are developed, this method can be used effectively in various applications including telemedicine. This study examines voice analysis parameters used for laryngeal disease discrimination to help discriminate laryngeal diseases by voice signal analysis. The study also estimates the laryngeal cancer discrimination activity of the Gaussian mixture model (GMM) classifier based on the statistical modelling of voice analysis parameters. Materials and Methods : The Multi-dimensional voice program (MDVP) parameters, which have been widely used for the analysis of laryngeal cancer voice, sometimes fail to analyze the voice of a laryngeal cancer patient whose cycle is seriously damaged. Accordingly, it is necessary to develop a new method that enables an analysis of high reliability for the voice signals that cannot be analyzed by the MDVP. To conduct the experiments of laryngeal cancer discrimination, the authors used three types of voices collected at the Department of Otorhinorlaryngology, Pusan National University Hospital. 50 normal males voice data, 50 voices of males with benign laryngeal diseases and 105 voices of males laryngeal cancer. In addition, the experiment also included 11 voices data of males with laryngeal cancer that cannot be analyzed by the MDVP, Only monosyllabic vowel /a/ was used as voice data. Since there were only 11 voices of laryngeal cancer patients that cannot be analyzed by the MDVP, those voices were used only for discrimination. This study examined the linear predictive cepstral coefficients (LPCC) and the met-frequency cepstral coefficients (MFCC) that are the two major cepstrum analysis methods in the area of acoustic recognition. Results : The results showed that this met frequency scaling process was effective in acoustic recognition but not useful for laryngeal cancer discrimination. Accordingly, the linear frequency cepstral coefficients (LFCC) that excluded the met frequency scaling from the MFCC was introduced. The LFCC showed more excellent discrimination activity rather than the MFCC in predictability of laryngeal cancer. Conclusion : In conclusion, the parameters applied in this study could discriminate accurately even the terminal laryngeal cancer whose periodicity is disturbed. Also it is thought that future studies on various classification algorithms and parameters representing pathophysiology of vocal cords will make it possible to discriminate benign laryngeal diseases as well, in addition to laryngeal cancer.

• Journal of Educational Research in Mathematics
• /
• v.26 no.1
• /
• pp.47-62
• /
• 2016

Cultivating mathematical creativity is one of the aims in the recently revised mathematics curricular. However, there have been lack of researches on how to nurture mathematical creativity for ordinary students. Perspective of Realistic Mathematics Education(RME), which pursues education of creative person as the ultimate goal of mathematics education, could be useful for developing principles and methods for cultivating mathematical creativity. This study reanalyzes RME from the points of view in mathematical creativity education. Major findings are followed. First, students should have opportunities for mathematical creation through mathematization, while seeking and creating certainty. Second, it is vital to begin with realistic contexts to guarantee mathematical creation by students, in which students can imagine or think. Third, students can create mathematics in realistic contexts by modelling. Fourth, students create the meaning of 'model of(MO)', which models the given context, the meaning of 'model for(MF)', which models formal mathematics. Then, students create MOs and MFs that are equivalent to the intial MO and MF given by textbook or teacher. Flexibility, fluency, and novelty could be employed to evaluate the MOs and the MFs created by students. Fifth, cultivation of mathematical creativity can be supported from development of local instructional theories by thought experiment, its application, and reflection. In conclusion, to employ the education model of cultivating mathematical creativity by RME drawn in this study could be reasonable when design mathematics lessons as well as mathematics curriculum to include mathematical creativity as one of goals.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.808-823
• /
• 2008

Sediment abrasion in rivers is caused by the interaction between bedrock channel bed and sediment particles transported through the river. Abrasion rate of sediment particles in rivers is controlled by two major factors; Sediment transport conditions including hydraulic conditions form the erosive forces and physical and chemical strengths of the particles form a resistance force against abrasion and other erosional processes. Physical experiments were performed to find the role of each variable on sediment abrasion process. Total 266 sediment particles were used in this experiment. All sediment particles were divided into 11 independent sediment groups with sediment particle size and sediment loads. Each sediment groups were abraded in tumbling mill for up to 8 hours. Changes in weight were recorded by run and total: 2,128 cases of abrasion rate were recoded. Physical strength of rock particles was measured with point load strength index. It is found that sediment abrasion rate has a negative functional relationship point load strength index ($I_{a(50)}$) ($R^2=0.22$). It was suggested that physical strength of sediment particles set the "maximum possible abrasion rate'. As sediment flux increases, abrasion rates of sediment particles with similar point load strength index were changed. It could be concluded that not only physical characteristics of sediment particles, but also sediment transport conditions control sediment abrasion rates.

• Horticultural Science & Technology
• /
• v.30 no.6
• /
• pp.650-656
• /
• 2012

The aims of the experiment, conducted over three years in the Central Europe field conditions, were (1) to investigate the effect of growing period (plantings in the middle and at the end of August: $1^{st}$ and $2^{nd}$ term, respectively) on yield and chemical composition of the non-heading Chinese cabbage (Brassica rapa var. chinensis) cultivars 'Taisai', 'Pak Choy White', and 'Green Fortune', and (2) to develop regression models to evaluate the changes in crop yields as a function of weather conditions. A highest marketable yield was obtained from 'Taisai' (65.71 and 77.20 $t{\cdot}ha^{-1}$), especially in the $2^{nd}$ term of production. Low yield, observed for 'Pak Choy White' was due to its premature bolting. Almost 39% ($1^{st}$ term) and 70% ($2^{nd}$ term) of plants of this cultivar formed inflorescence shoots before harvest. The highest dry matter level was observed in the leaf petioles of 'Taisai', while 'Green Fortune' was the most abundant of carotenoids and L-ascorbic acid. The content of soluble sugars was the lowest for 'Pak Choy White'. In a phase of harvest maturity, more of the analyzed constituents were gathered by plants from earlier plantings, and differences were as follows: 4.7% (dry matter), 26.3% (carotenoids) and 22.1% (L-ascorbic acid), in comparison to $2^{nd}$ term of production. Significant increase of soluble sugars level was observed for plants from later harvest. The regression model for marketable yield of Chinese cabbage cultivar 'Taisai' as a function of maximum air temperature can predict the yield with accuracy 68%. The models for yield or bolting of 'Pak Choy White', based on extreme air temperatures and sunshine duration, were more precise (98%). It should be pointed out that Taisai could be recommended for later growing period in Central Europe conditions with regard to maximum yield potential. 'Green Fortune' was notable for its uniform yielding. To obtained plants of higher nutritional value, earlier time of cultivation should be suggested. Described models can be successfully applied for an approximate simulation of Chinese cabbage yielding.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.313-322
• /
• 2006

Among many modelling factors which consist of a screen, a form brings a child's psychological response, according to its being drawn and expressed shape, and would be defined as a visual descriptive method which transmits the relation between the subject and background by a story content and the circumstance and emotion of characters in the story. In this study, to analyze how an expressed form on a screen works to a child visually and psychologically, I, first have examined how differently a child's perception development and its experience to the form is come out by the age of a child, and have found that it influences on a child's originality and creativity development, visual and psychological thinking development, and the stimulation on dream and imagination. And I have examined each characteristic by discriminating the expressive style of the form into a reproductive, a simplified, an exaggerated and a distorted form expression, and by utilizing it as substantiative data through the 1st and 2nd stage, have analyzed responses and preferences according to a style of a child's expression form. In conclusion, I have considered that the analysis result through the substantiative study would be a help not only to the form expression which is based on an illustrator's personality and creativity, and also would be utilized in the effective expression method study and experiment of students who learns the illustration.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.369-378
• /
• 2003

The statistical modeling was introduced to satisfy various experimental conditions on the sorption of heavy metals (Pb, Cu, Cd, and Zn) by clay minerals, i.e. kaolinite, illite and chlorite. The Box-Behnken model designed statistically was applied to determine a relative impact among three variables such as pH, HCO3(or K) concentration and initial concentration of heavy metals. The SAS program was used to obtain the statistical solution by surface response analysis. The results of a statistical sorption modelling indicated that pH is a strong impact of the variables influencing the sorption of heavy metals. A relative effect between an initial concentration of heavy metals and bicarbonate(or K) concentration is dependent on solution condition. The sorption edge of heavy metals as function of pH shows sigmoidal curve, and a great increase in the range of pH 6～8. The sorption sequence among heavy metals is Cu>Pb>>Zn>Cd. The solution chemistry exerts greater influence on the sorption of heavy metals rather than the crystal chemistry of clay minerals. The potassium exerts some effect into a sorption competition with heavy metals. The research suggests that the statistical modeling is an effective method to demonstrate sorption results in three dimension and to reduce the effort of batch sorption experiment.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.2
• /
• pp.67-73
• /
• 2007

A respiration rate analysed by enzyme kinetics-based respiration model and gas permeability data of LDPE film were applied to design the optical modified atmosphere (MA) packaging condition of persimmon (Diospyros kaki cv. Fuyu) fruits. The fruit quality rapidly decreases due to physiology disorder such as softening and peel blackening. $O_2$ permeance ($Q_{O2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) and $CO_2$ performance ($Q_{CO2}$ in $ml{\cdot}hr^{-1}{\cdot}atm^{-1}{\cdot}m^{-2}$) of low density polyethylene (LDPE) film samples were measured at $0^{\circ}C$ and described as function of thickness (L in ${\mu}m$) as $Q_{O2}=(2540{\times}1/L)-16$, and $Q_{CO2}=(13742{\times}1/L)-70$, respectively. MA package containing single persimmon fruit of 225g was designed and tested experimentally at $0^{\circ}C$ by using LDPE films. Package atmospheres predicted from the relationship of $O_2$, $CO_2$ and $N_2$ balances on the packages was in good agreement with those obtained experimentally. Physiology disorder occurrence was the lowest at 52 ${\mu}m$ package that attained optimum gas condition ($O_2$ 2.8% and $CO_2$ 5.4%). The computer simulation was found to be effective to help to design the optimum MA packaging condition of individual persimmon fruit.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.372-382
• /
• 2013

Thermal-hydro-mechanical (THM) modeling is a critical R&D issue in the performance and safety assessment of a high-level waste repository. With an $\ddot{A}$sp$\ddot{o}$ prototype repository, its thermal behavior was analyzed and then compared with in-situ experimental data for its validation. A model simulation was used to calculate the temperature distributions in the deposition holes, deposition tunnel, and surrounding host rock. A comparison of the simulation results with the experimental data was made for deposition hole DH-6, which showed that there was a temperature difference of $2{\sim}5^{\circ}C$ depending on the location of the measuring points, but there was a similar trend in the evolution curves of temperature as a function of time. It was expected that the coupled modeling of the thermal behavior with the hydro-mechanical behavior in the buffer and backfill of the $\ddot{A}$sp$\ddot{o}$ prototype repository would give a better agreement between the experimental and model calculation results.

• Journal of Korea Water Resources Association
• /
• v.49 no.3
• /
• pp.241-252
• /
• 2016

In this study, the characteristics of flow and bed changes with variation of space and length of serial spur dikes were investigated with 2 dimensional numerical simulation. Upstream spur dike was affected by flow and made a role as a single spur dike. As time increased, local scouring was developed around outside of spur dike, and migrated upstream. The aggradation of the bed at the back of spur-dike was made at the initial stage of experiment and numerical modelling. However, the aggradation of the bed was increased in the downstream area. The scour whole around a spur dike upstream was not deep as the Dimensionless spur-dike interval (b) of the dike increased. The depth of scour hole was nearly constant at the dynamic equilibrium state. The dimensionless scour depth ($y_s/H$) increased with L/b. The spur dike downstream had the characteristics of single spur dike as the L/b was larger than 10. However, the spur dike downstream was affected by the dike upstream as the L/b was less than 4, and the bed of the upstream in the spur dike was aggradated and the effects of the serial spur dikes on the bed decreased.