• International Journal of Computer Science & Network Security
• /
• 제21권11호
• /
• pp.165-170
• /
• 2021

Discrete event systems interact with the external environment to decide which action plan is adequate. Some of these interactions are not predictable in the modelling phase and require consequently an adaptation of the system to the metamorphosed behavior of the environment. One of the challenging issues is to guarantee safety behavior when failures tend to derive the system from normal status. In this paper we propose a framework to combine diagnose technique with adaptive control to avoid unsafe sate an maintain the normal behavior as long as possible.

• 인터넷정보학회논문지
• /
• 제15권1호
• /
• pp.171-178
• /
• 2014

본 논문에서는 실시간으로 가상현실의 증강객체에 외부의 힘이 작용할 때 증강된 가상 객체의 동적 모델링 방법을 제시하였다. 가상객체의 자연스러운 움직임을 시뮬레이션 하기 위하여 AR 객체에 적용되는 외부의 힘의 변화에 대하여 Newton의 운동법칙을 적용하여 객체의 움직임을 설명하는 식을 생성하였다. 동적 모델링 과정에서 증강된 객체와 햅틱 장비간의 실질적 상호작용이 발생하며 이때 외부의 힘이 가상객체에 전달된다. 증강된 객체의 고유특성은 강체 혹은 탄성체의 성질을 갖는 모델이다. 강체의 동적 모델링에서는 선형 모멘텀과 각속도 모멘텀을 모두 고려하여 증강된 객체와 햅틱 스틱이 충돌할 때 수행하였다. 비강체의 동적 모델링에 있어서는 탄성체의 변형 모델은 내외의 힘과 제한요소에 자연적으로 반응하기 때문에 물리기반 시뮬레이션 방법을 적용하였다. 증강된 탄성체는 햅틱 인터페이스를 통해 사용자에 의하여 발생하는 힘의 특성과 모델의 고유 특성에 따라 자연스럽게 변형된다. 변형 물체의 모델링을 위하여 Newton의 제 2 운동법칙이라 불리는 질량-스프링 연결 시스템을 적용하였다. 실험을 통하여 증강된 강체와 비강체의 성질을 지닌 가상 객체에 햅틱 장비에 의한 햅틱 상호작용이 발생 할 때 객체의 변환을 자연스럽게 가시화 할 수 있었다.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.45-55
• /
• 2018

The arched stone bridge has been continuously deteriorated and damaged by the weathering and corrosion over time, and also natural disaster such as earthquake has added the damage. However, masonry stone bridge has the behavior characteristics as discontinuum structure and is very vulnerable to lateral load such as earthquake. So, it is necessary to analyze the dynamic behavior characteristics according to various design variables of arched stone bridge under seismic loads. To this end, the arched stone bridge can be classified according to arch types, and then the discrete element method is applied for the structural modelling and analysis. In addition, seismic loads according to return periods are generated and the dynamic analysis considering the discontinuity characteristics is carried out. Finally, the dynamic behavior characteristics are evaluated through the structural safety estimation for slip condition.

• Structural Engineering and Mechanics
• /
• 제61권1호
• /
• pp.77-90
• /
• 2017

Glazed curtain walls are façade systems frequently chosen in modern architecture for mid and high-rise buildings. From recent earthquakes surveys it is observed the large occurrence of non-structural components failure, such as storefronts and curtain walls, which causes sensitive economic losses and represents an hazard for occupants and pedestrians safety. In the present study, the behavior of curtain wall stick systems under seismic actions has been investigated through experimental in-plane racking tests conducted at the laboratory of the Construction Technologies Institute (ITC) of the Italian National Research Council (CNR) on two full-scale aluminium/glass curtain wall test units. A finite element model has been calibrated according to experimental results in order to simulate the behavior of such components under seismic excitation. The numerical model investigates the influence of the interaction between glass panels and aluminium frame, the gasket friction and the stiffness degradation of aluminium-to-glass connections due to the high deformation level on the curtain walls behavior. This study aims to give a practical support to researchers and/or professionals who intend to numerically predict the lateral behavior of similar façade systems, so as to avoid or reduce the need of performing expensive experimental tests.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.617-635
• /
• 2021

This paper numerically investigated the behavior of built-up square concrete-filled steel tubular (CFST) columns under combined preload and axial compression. The finite element (FE) models of target columns were verified in terms of failure mode, axial load-deformation curve and ultimate strength. A full-range analysis on the axial load-deformation response as well as the interaction behavior was conducted to reveal the composite mechanism. The parametric study was performed to investigate the influences of material strengths and geometric sizes. Subsequently, influence of construction preload on the full-range behavior and confinement effect was investigated. Numerical results indicate that the axial load-deformation curve can be divided into four working stages where the contact pressure of curling rib arc gradually disappears as the steel tube buckles; increasing width-to-thickness (B/t) ratio can enhance the strength enhancement index (e.g., an increment of 1.88% from B/t=40 to B/t=100), though ultimate strength and ductility are decreased; stiffener length and lip inclination angle display a slight influence on strength enhancement index and ductility; construction preload can degrade the plastic deformation capacity and postpone the origin appearance of contact pressure, thus making a decrease of 14.81%~27.23% in ductility. Finally, a revised equation for determining strain εscy corresponding to ultimate strength was proposed to evaluate the plastic deformation capacity of built-up square CFST columns.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.411-414
• /
• 1999

Five reinforced concrete rigid frame and masonry infilled wall and cut off type masonry infilled wall were constructed and tesed during vertical and cycle loads simultaneously. Experimental programs were accomplished to evaluate the structural performance of test spcimens, such as the hysteretic behavior, the maximum horizontal strength, crack propagation, and ductility etc. Test variables are hoop reinforcement ratio and masonry infilled wall with on without. All the specimens were modelling in one-third scale size.

• 한국세라믹학회지
• /
• 제24권5호
• /
• pp.411-416
• /
• 1987

Thermal expansions and thermal expansion coefficients of cordierite ceramics reinforced by SiC whiskers up to 40 vol. % were investigated. The composite specimens were hot pressed at 1523K for 30 min under 28.5 MPa pressing pressure in Ar atmosphere. Thermal expansions of the hot pressed composites were measured using a differential dilatometer up to 1262 K in air. Thermal expansions and thermal expansion coefficient of the composites increased with SiC whisker content. Thermal expansion behaviors of the composites were well explained by modelling parallel slabs randomly distributed on the whisker plane as the microstructural element of the composites.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 추계학술논문발표회 논문집
• /
• pp.328-331
• /
• 2007

• 자원ㆍ환경경제연구
• /
• 제9권2호
• /
• pp.373-391
• /
• 2000

This paper investigates the existence of a long-run relationship between world oil price and consumer price index for Korea during 1983~1999. The cointegration and error correction modelling approaches have been applied. Empirical results suggest that there exists a long-run relationship among world oil prices. consumer prices, M2 and a production gap variable. The dynamic behavior of the relationship has been investigated by estimating a error correction model, in which the error correction term have been found significant. The error correction model has also been found to be robust as it satisfy almost all relevant diagnostic tests.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.388-391
• /
• 2003

In this study, the experimental results were simulated by using a nonlinear analysis programs IDARC 2D and RUAUMOKO 2D. These programs use a global Takeda-like model. The objectives of this study is to verify the correlation between the experimental and analytical responses of reinforced concrete (RC) frame and to provide the calibration to the available static inelastic analysis techniques. The evaluation of the accuracy of analytical simulation by IDARC 2D and RUAUMOKO 2D leads to the conclusion that the global behaviors can be, in general, simulated with limited accuracy in the linear analysis as detailing.