• 반도체디스플레이기술학회지
• /
• 제5권4호
• /
• pp.29-34
• /
• 2006

In order to design an OLED(Organic Luminescent Emitting Device) evaporation system, geometric simulation of film thickness distribution profile is required. For the OLED evaporation process, thin film thickness uniformity is of great practical importance. In this paper, a geometric modeling algorithm is introduced for process simulation of the OLED evaporating process. The physical fact of the evaporating process is modeled mathematically. Based on the developed method, the thickness of the thin-film layer can be successfully controlled.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.252-255
• /
• 2003

The pulsed laser deposition process modeling is investigated using neural networks based on radial basis function networks and multi-layer perceptron. Two input factors are examined with respect to the PL intensity. In order to minimize the joint confidence region of fabrication process with varying the conditions, D-optimal experimental design technique is performed and photoluminescence intensity is characterized by neural networks. The statistical results were then used to verify the fitness of the nonlinear process model. Based on the results, this modeling methodology can be optimized process conditions for pulsed laser deposition process.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2327-2335
• /
• 2018

Fluid catalytic cracking (FCC) is an important chemical process that is widely used to produce valuable petrochemical products by cracking heavier components. However, many difficulties exist in modeling the FCC process due to its complexity. In this study, a dynamic process model of a FCC process is suggested and its structural observability is analyzed. In the process modeling, yield function for the kinetic model of the riser reactor was applied to explain the product distribution. Hydrodynamics, mass balance and energy balance equations of the riser reactor and the regenerator were used to complete the modeling. The process model was tested in steady-state simulation and dynamic simulation, which gives dynamic responses to the change of process variables. The result was compared with the measured data from operating plaint. In the structural analysis, the system was analyzed using the process model and the process design to identify the structural observability of the system. The reactor and regenerator unit in the system were divided into six nodes based on their functions and modeling relationship equations were built based on nodes and edges of the directed graph of the system. Output-set assignment algorithm was demonstrated on the occurrence matrix to find observable nodes and variables. Optimal locations for minimal addition of measurements could be found by completing the whole output-set assignment algorithm of the system. The result of this study can help predict the state more accurately and improve observability of a complex chemical process with minimal cost.

• 한국CDE학회논문집
• /
• 제6권3호
• /
• pp.157-168
• /
• 2001

The description of enterprise activities is the basis fur process improvement and information system building. To describe such activities, it is necessary to model the enterprise activities from the abstraction level to the implementation level in a stepwise and integrated form. For this reason, several modeling approaches have been proposed. However, most of them lacked the stepwise or integration aspects although some of them covered overall levels. This study proposes the hierarchical modeling approach for integrating the enterprise activity model from the abstraction level to the implementation level systematically. It is composed of five modeling levels such as function level, process level, task level, document workflow level, and event flow level. This study discusses the definition and characteristics of each level and compare our modeling frame with other modeling methodologies in case study.

• 한국멀티미디어학회논문지
• /
• 제11권4호
• /
• pp.525-543
• /
• 2008

최근 들어 소프트웨어 개발에 있어서 사용자 인터페이스가 차지하는 비중이 급증하고 있다. 이로 인해 스윙, MFC, Web 2.0 등과 같은 다양한 사용자 인터페이스 개발 관련 기술들이 소개되고 있다. 그러나 현재 대부분의 소프트웨어 개발에 있어서는 사용자 인터페이스 부분과 비즈니스 부분을 별도로 개발하는 프로세스로 진행되고 있다. 이로 인해 통합 과정에서의 어려움, 개발 기간의 연장, 개발 모델의 재사용성의 저하등과 같은 문제점들이 발생하고 있다. 즉, UI 모델링이 체계적이고 계층적이지 못하며, UI 모델링과 비즈니스 모델링간의 일관성있는 통합 기법을 제공치 않아, 구축 모델의 확장성과 재사용성의 저하를 초래하고 있다. 본 논문은 이를 해결하기 위해 개발 단계의 추상화 수준에 따른 계층적 메타모델을 사용해서 단일화되고 체계적인 UML 기반의 사용자 인터페이스 모델링 프로세스를 제시한다. 이를 위해, 개발의 성숙도에 준거하여 PIM/PSM으로 UI 모델의 모델링 요소를 계층화하여 메타모델을 제시한다. 3 단계 모델링(개념/명세/상세)에 의해 UI 및 비즈니스 메타모델을 적용해서 UI 모델링과 비즈니스 모델링이 통합된 계층적인 모델링 프로세스를 정립한다. 제시한 프로세스를 인터넷 쇼핑몰에 적용해 봄으로써 실효성을 제시한다. 실험 결과를 통해 계층적 UI 메타모델 및 프로세스가 체계적이고 계층적인 UI 모델을 구축할 수 있다. 이는 모델의 품질과 재 사용성을 향상시킬 수 있었다.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제2권4호
• /
• pp.227-238
• /
• 2013

업무에 초점을 둔 BPMN 모델은 서비스 지향 비즈니스 모델링에 한계점을 안고 있다. 이에, SOA 기반의 시스템 개발을 위해 서비스 수준에서 복잡한 응용 시스템을 디자인할 수 있는 서비스 지향의 비즈니스 모델링 기법이 요구된다. 본 논문은 BPMN 비즈니스 모델의 모듈성과 재사용성을 향상시키기 위해, 서비스 지향으로 BPMN 모델을 계층적으로 구축할 수 있는 메타모델과 이에 기반한 비즈니스 모델링 프로세스를 제시한다. 이를 위해, BPMN 모델의 모델링 요소들을 MDA와 MVC 패턴에 의해 계층화하고 서비스 지향의 모델링을 위한 확장된 XL-BPMN 메타모델을 정의한다. 이 메타모델의 모델링 요소를 이용해서, 모델링 단계에 의한 BPMN 서비스 모델링 프로세스를 정립한다. 이 기법은 온라인쇼핑몰시스템의 비즈니스 모델링에 사례로서 적용되고 평가되어진다. 잘 정의된 메타모델과 모델링 프로세스를 통해, 서비스 중심의 BPMN 비즈니스 모델을 생성할 수 있고, BPMN 모델의 모듈성을 증진시킬 수 있으며, 또한 독립적으로 재사용 가능한 모델의 수를 극대화할 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.487-490
• /
• 2004

In order to simulate OLED evaporation process, modeling of directional distribution of the vaporized organic materials, film thickness distribution profile and pattern-mask shadow effect are required In accordance with many literatures; all of them except shadow effect modeling are studied and developed. In this paper, modeling algorithm of evaporation shadow is presented for process simulation of full-color OLED evaporating system. In OLED evaporating process the offset position of the point cell-source against the substrate rotation axis and the usage of the patterned mask are the principal causes for evaporation shadow. For geometric simulation of shadow using z-map, the film thickness profile, which is condensed on a glass substrate, is converted to the z-map data. In practical evaporation process, the glass substrate is rotated. This physical fact is solved and modeled mathematically for z-map simulation. After simulating the evaporation process, the z-map data can present the shadow-effected film thickness profile. Z-map is an efficient method in that the cross-sectional presentations of the film thickness profile and thickness distribution evaluation are easily and rapidly achieved.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.133-136
• /
• 2000

In recent years, hybrid neural network approaches which combine neural networks and mechanistic models have been gaining considerable interests. These approaches are potentially very efficient to obtain more accurate predictions of process dynamics by combining mechanistic and neural models in such a way that the neural network model properly captures unknown and nonlinear parts of the mechanistic model. In this work, such an approach was applied in the modeling of a full-scale coke wastewater treatment process. First, a simplified mechanistic model was developed based on the Activated Sludge Model No.1 and the specific process knowledge, Then neural network was incorporated with the mechanistic model to compensate the errors between the mechanistic model and the process data. Simulation and actual process data showed that the hybrid modeling approach could predict accurate process dynamics of industrial wastewater treatment plant. The promising results indicated that the hybrid modeling approach could be a useful tool for accurate and cost-effective modeling of biochemical processes.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.190-194
• /
• 2004

본 논문에서는 비선형 생화학적인 공정의 모델링을 위해 퍼지시스템이 응용된 것을 보인다. SBR 반응조에서 질소제거를 위한 수처리 공정이 제시되었으며, 이 공정의 ORP값을 모델링하고 동정하기 위해 서로 다른 후반부 다항식을 가진 퍼지시스템이 소개되었다. 퍼지모델링 결과를 비교하고 분석하며 또한 제안된 방법에 의해 비선형 공정이 합리적이고 효율적으로 모델링 될 수 있음을 본 논문에서 보인다.

• 한국전자거래학회지
• /
• 제3권2호
• /
• pp.141-160
• /
• 1998

In order to achieve a successful introduction of CALS, an enterprise model which is a concise description of what an enterprise does is required. The enterprise model mainly consists of a process model and a data model. The process model describes processes that create, change, combine, or destroy the entities within the enterprise. Several process modeling methodologies have been proposed. Each modeling methodology requires its own modeling view point, elements, and syntax. In developing a process model for CALS, these models created at different view points are required to analyze and design a system in a broad view. This paper aims at proposing an integration methodology for a process model. Specifically, IDEF0, IDEF3, and Petri Net are considered to be integrated. An IDEF0 model describing static functions of enterprise is transformed to an IDEF3 model describing behaviour of a system with additional information. Also, the IDEF3 model is transformed to a Petri Net model. These transformations will be automatically accomplished once the additional information for the transformation is provided.