• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.455-458
• /
• 2013

The conventional design of the information system architecture based on the personal experience of information systems has been acted as a limit in progress utilizing appropriate resource allocation and performance improvements. Architecture design depending on personal experience makes differences in variance of a designer's experience, intellectual level in related tasks and surroundings, and architecture quality according to individual's propensity. After all these problems cause a waste of expensive hardware resources. At working place, post-monitoring tools are diversely developed and are running to find the bottleneck and the process problems in the information operation. However, there are no simulation tools or models that are used for expecting and counteracting the problems at early period of designing architecture. To solve these problems we will first develop a simulation model for designing information system architecture in a pilot form, and will verify validity. If an error rate is found in the permissible range, then it can be said that the simulation reflects the characteristic of information system architecture. After the model is developed in a level that can be used in various ways, more accurate performance computation will be able to do, getting out of the old way relying on calculations, and prevent the existence of idle resources and expense waste that comes from the wrong design of architecture.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.423-431
• /
• 2011

Recentincreasing awareness of the environmental damage caused by the $CO_2$ emission of fossil fuelsstimulated the interest in alternative and renewable sources of energy. Fuel cell is a representative example of hydrogen energy utilization. In this study, Molten Carbonate Fuel Cell system is simulated by using $Aspen^{TM}$. Stack model is consisted of equilibrium reaction equations using $ACM^{TM}$(Aspen Custom Modeler). Balance of process of fuel cell system is developed in Aspen $Plus^{TM}$ and simulated at steady-state. Analysis of performance of the system is carried out by using sensitivity analysis tool with main operating parameters such as current density, S/C ratio, and fuel utilization and recycle ratio.In Aspen $Dynamics^{TM}$, dynamics of MCFC system is simulated with PID control loops. From the simulation, we proposed operation range which generated maximum power and efficiency in MCFC power plant.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.63-73
• /
• 2017

In contemporary society, it is increasingly common to spend more time indoors. As such, there is a continually growing desire to build comfortable and safe indoor environments. Along with this trend, however, there are some serious indoor-environment challenges, such as the quality of indoor air and Sick House Syndrome. To address these concerns the government implements various systems to supervise and manage indoor environments. For example, green building certification is now compulsory for public buildings. There are three categories of green building certification related to indoor air in Korea: Health-Friendly Housing Construction Standards, Green Standard for Energy & Environmental Design(G-SEED), and Indoor Air Certification. The first two types of certification, Health-Friendly Housing Construction Standards and G-SEED, evaluate data in a drawing plan. In comparison, the Indoor Air Certification evaluates measured data. The certification using data from a drawing requires a considerable amount of time compared to other work. A 2D tool needs to be employed to measure the area manually. Thus, this study proposes an automatic assessment process using a Building Information Modeling(BIM) model based on 3D data. This process, using open source Industry Foundation Classes(IFC), exports data for the certification system, and extracts the data to create an Excel sheet for the certification. This is expected to improve the work process and reduce the workload associated with evaluating indoor air conditions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.521-528
• /
• 2013

Urban drainage systems are generally designed as open channel flow. The system, however, shows a partially surcharged flow in its body, especially at junctions or manholes. Thus, a special case of this condition needs to be explained as pressurized flow condition for designing the sewer system. This study considered the surcharged manhole flows during an unexpected rainfall event or an excess of design frequency. Overflows from surcharged manholes and urban flooding can occur from the effect of surcharged flows. Thus, sewer systems should be designed with the concept of open channel flow and pressurized flow. Also, energy losses in a manhole need to be considered. The aim of this study is to develop the numerical model which can evaluate the effect of the energy losses at the manhole. The numerical model was verified and compared with hydraulic model and SWMM. The results showed that the water depth of numerical model was in good agreement with hydraulic model at the each manhole. However, the SWMM underestimated the water depth because that model ignored the energy losses at manholes. Thus, the developed numerical model in this study could be a useful tool for the assessment of a conveyance of urban drainage system.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.35-41
• /
• 2000

This paper considers the consturction of 24/25 I-NRZI (Interleaved - Non Return to Zero Inverse) modulator designs for DVCR (Digital Video Cassette Recorder), and size of validity bit in order to store the amplitude value of square-wave and the standard data ( sine and cosine coefficients) at ROM Table that to acceptable the spectrum standard. The validity bit size of the standard data and the amplitude value of square-wave that to store at ROM Table are affected the size of pilot signal on the output spectrum, and the hardware size of modulator. At the designable 24/25 I-NRZI modulator, we simulated using random pattern (F0,F1,F2) that to verification the output data of the spectrum. Moreover, the resultant of the spectrum analysis, at the optimizing value, is 0.065 on the amplitude value of square-wave, and 3bit on the size of bit in order to store the standared data at ROM Table. In order to verify the hardware of designable 24/25 I-NRZI modulator, we perform to modeling of C-language firstly, and coding to Verilog HDL (Cadence Verilog XL) and synthesized using Synopsys (Library "Samsung KG75") tool as a base of spectrum results. In a foundation of this result, we are considered the size of hardware. In this paper, a considerable 24/25 I-NRZI modulator designable less than 10,000 gates as that is improved consturction as regards the path method of pre-coder etc, and able to application digital camcorders as now practical use.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.59-67
• /
• 2013

Complex-shaped tall building causes many structural challenges due to its structural characteristics regarding inclined members and complexed shape. This paper is aimed at development of design process using computational-platform which is effective design tool for responding frequent design changes, particularly as to overseas projects. StrAuto, a parametric structural modeling and optimizing system, provides the optimized alternatives according to design intent and realize a swift process converting a series of structural information necessary to nonlinear analytical models. The application of the process was to a 45-story hotel building in Ulanbator, Mongolia adopting shear wall and special moment frame with outrigger systems. To investigate the safety of lateral force resisting system against maximum considered earthquake(MCE), nonlinear response history analysis was conducted using StrAuto.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.29-34
• /
• 2015

Accidents in laboratory dealing with chemicals have constantly occurred. In the case of a gas explosion or an accident related to leakage of chemical materials, the damage is much greater, thereby leading to a serious accident. Especially, the safety of laboratory in University is important because students build up knowledge and skills and accumulate experience as the main researchers. In this paper, 5 gases(CO, $NH_3$, $H_2$, $CH_4$, $N_2$) are selected to model since they are often used in university laboratories. From the scenarios where the gases are released, the diffusion process is estimated and analyzed to predict damage degree by PHAST v.6.7. Internal diffusion process is modeled through FLUENT which is Computational Fluid Dynamics(CFD) tool. Also, we compare indoor damage with outdoor one when discharged to the outside through the laboratory's window. In the modeling results, the outdoor damages for accident scenarios in the results are far less than then of real plants since the vessel usually used in laboratory(i.e. the capacity of the cylinder; 47 L or less) is significantly less than workplace's one(using ton measure). However as shown in the results small amount can have high consequences for indoor accidents.

• The KIPS Transactions:PartD
• /
• v.13D no.3 s.106
• /
• pp.405-414
• /
• 2006

These days, business environments are rapidly change and companies are taking the pressure about a customer value enhance to the continuance from the market. Therefore companies propel various innovative and strategic initiatives for a customer value enhancement. Also Information Technology is rapidly becoming part of our everyday lives due to its fast development, the functions and responsibilities of CSC(Consolidated Service Center) are undergoing revolutionary change. The function of sales organization based on the manpower and human networks are gradually shrinking, and CSC is slowly establishing itself as the company's core parts as its function expands and its operations are in the spotlights. Among these, many organizations are currently introducing ITSM concept for primary processes as a means of achieving synergy in operational excellence, reducing costs and improving service quality. In this thesis, we propose an extended CSC, which is applied ITIL Process to traditional BMP. It also needs to manage more effectively business process model, to modeling rapidly changing business process, and to developing its business application programs whenever and whatever it is changed. The ITSM(IT Service Management), which is an ITIL tool, effectively managing for dynamically changing the business process.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.727-737
• /
• 1999

프로세스 중심 소프트웨어 개발 환경(PSEE : Process-centered Software Engineering Environment)은 소프트웨어 개발자를 위한 여러가지 정보의 제공과 타스크의 수행, 소프트웨어 개발 도구의 수행 및 제어, 필수적인 규칙이나 업무의 수행등과 같은 다양한 행위를 제공하는 프로세스 모형의 수행을 통하여 소프트웨어 개발 행위를 지원한다. SEED(Software Engineering Environment for Development)는 효율적인 소프트웨어 개발과 프로세스 모형의 수행을 제어하기 위해 ETRI에서 개발된 PSEE이다.본 논문에서는 SEED에서 프로세스 모형을 설계하기 위해 사용되는 SimFlex 프로세스 프로그래밍 언어와, 수행지원시스템인 SEED Engine의 구현에 대하여 기술한다. SimFlex는 간단한 언어 구조를 가진 프로세스 프로그래밍 언어이며, 적절한 적합화를 통하여 다른 PSEE에서 사용될 수 있다. SimFlex 컴파일러는 SimFlex에 의해 기술된 프로세스 모형을 분석하고, 모형의 오류를 검사하며, SEED Engine에 의해 참조되는 중간 프로세스 모형을 생성한다. 중간 프로세스 모형을 사용하여 SEED Engine은 외부 모니터링 도구와 연관하여 사용자를 위한 유용한 정보뿐만 아니라 SimFlex에 의해 기술된 프로세스 모형의 자동적인 수행을 제공한다. SimFlex 언어와 수행지원 시스템의 지원을 통하여 소프트웨어 프로세스를 모형화하는데 드는 비용과 시간을 줄일 수 있으며, 편리하게 프로젝트를 관리하여 양질의 소프트웨어 생산물을 도출할 수 있다. Abstract Process-centered Software Engineering Environments(PSEEs) support software development activities through the enaction of process models, providing a variety of activities such as supply of various information for software developers, automation of routine tasks, invocation and control of software development tools, and enforcement of mandatory rules and practices. The SEED(Software Engineering Environment for Development) system is a PSEE which was developed for effective software process development and controlling the enactment of process models by ETRI.In this paper, we describe the implementation of the SimFlex process programming language used to design process models in SEED, and its runtime support system called by SEED Engine. SimFlex is a software process programming language to describe process models with simple language constructs, and it could be embedded into other PSEEs through appropriate customization. The SimFlex compiler analyzes process models described by SimFlex, check errors in the models, and produce intermediate process models referenced by the SEED Engine. Using the intermediate process models, the SEED Engine provides automatic enactment of the process models described by SimFlex as well as useful information for agents linked to the external monitoring tool. With the help of the SimFlex language and its runtime support system, we can reduce cost and time in modeling software processes and perform convenient project management, producing well-qualified software products.