• 한국통신학회논문지
• /
• 제35권12B호
• /
• pp.1227-1235
• /
• 2010

Stateflow는 임베디드 시스템을 모델링 하는 유용한 도구로 산업 현장에서 많이 사용되고 있다. 하지만 Stateflow는 연속적인 동작이나 시간에 따른 시스템의 행동을 표현하기에 불편한 점이 있다. 한편 Timing diagram은 전자공학의 하드웨어 분야에서 시스템의 동작을 표현하기 위한 도구로 널리 사용되고 있는 도구이다. 이 도구는 연속적인 동작이나 시간에 따른 시스템의 행동을 표현하기에 편리한 장점이 있다. 그러므로 본 논문에서는 시스템의 행동을 Stateflow로 모델링 할 때 기존의 불편했던 점들을 개선하기 위해서 Stateflow 도메인에서 Stateflow 표현방식과 Timing diagram 표현방식을 통합하여 모델링 하는 방법론인 $Stateflow_{TD}$를 제안하고자 한다. 본 논문은 Stateflow 모델과 Timing diagram 모델들을 통합하는 방법과 $Stateflow_{TD}$이 가지는 장점에 대해서 설명하였을 뿐만 아니라, 두 가지 예제 시스템을 사용하여 $Stateflow_{TD}$이 유용함을 보였다.

• 정보처리학회논문지D
• /
• 제8D권6호
• /
• pp.761-770
• /
• 2001

소프트웨어 산업이 급속하게 발전해감에 따라 정보 기술 업체간 경쟁이 더욱 심화되어 소프트웨어 재사용성, 적시성, 유지 보수성 등이 업체의 생명력으로 대두되면서 소프트웨어 컴포넌트 기술이 점차 각광을 받고 있다. 현재 몇몇 컴포넌트 생성 지원 도구들이 제공되고 있지만 컴포넌트의 식별, 모델링, 상세 설계, 코드 생성, 전개, 시험 등 컴포넌트 생성 전 과정을 밀접히 연계하여 지원하는 도구가 드물다. 또한, 특정 플랫폼에 의존적인 소규모 컴포넌트 생성에 중점을 두고 있어 사용자 관점의 다양한 규모의 컴포넌트 생성에는 제약이 따른다. 이 논문에서는 컴포넌트 생성에 연관된 모든 과정을 지원하는 컴포넌트 모델링 및 생성 지원 도구의 설계와 프로토타입 구현에 대해 기술한다. 컴포넌트 모델링은 영역 고유의 비즈니스 로직의 재사용 측면에서 컴포넌트 플랫폼 아키텍쳐에 관계없이 개념적인 컴포넌트의 식별 및 모델링을 지원한다. 상세설계 및 코드 생성 부분은 일차적으로 J2EE 플랫폼 아키텍쳐에 의존적으로 지원되며 설계 모델과 소스 코드의 일관성을 동적으로 유지시키는 Round-trip Engineering 기능을 지원한다.

• 전기학회논문지
• /
• 제66권6호
• /
• pp.885-891
• /
• 2017

The energy storage system(ESS) is a core component for exchanging the power system structure of the unidirectional power flow into a bidirectional structure. Its important role has been increasing because it has multiple functions such as output stabilization of new renewable energy, demand management, frequency regulation, etc. However, the performance evaluation technology of ESS in korea is lower than one of advanced countries and the recognition of standardization is also lack compared to advanced countries. Furthermore, in order to more accurately and reliably validate the performance of the ESS in advanced countries, it has been required to perform not only performance testing by H/W devices but also performance verification by S/W tool. Therefore, in order to verify the performance testing of ESS by S/W tool, this paper proposes the modeling method of performance testing devices for MW scaled ESS by using the PSCAD/EMTDC S/W, based on real testing devices in domestic institute. From the simulation results of proposed modeling method, it is confirmed that the proposed modeling method is a useful tool for performance validation of ESS.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.2(A)
• /
• pp.42-43
• /
• 2010

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 2003년도 한국생물과학협회 학술발표대회
• /
• pp.39-39
• /
• 2003

No Abstract, See Full Text

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.207-212
• /
• 1997

The purpose of this study is the development of CAM system which can cut and measure any shape by machining center and coordinate measuring machine. The overall goal of the CAM system is to achieve the CNC machining, from digitizing through to final cutting. The hardware of the system comprises PC and machining center, CMM. There are three steps in the CNC machining, (1) workpiece measuring on the CMM, (2) geometric modeling by the CAD system, (3) NC commands generation by the tool path compensated for tool nose radius. It is developed a software package, with which can conduct a micro CAM system in the PC without economical burden.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1832-1843
• /
• 1995

Tool interference is one of the most critical problems in sculptured surface machining. When machining cavities and concaves, the tool frequently overcuts the portions of the surface, which cause inaccuracy in machining. So tool interference-free paths must be generated for rough cutting more efficiently. In this paper a software using SSI(Surface/Surface intersection) algorithm is developed for eliminating tool interference which occurs in an offset surface in 3-dimensional free form surface modeling. this work consists of two stages : using the offset data, the intersection curves are rapidly checked by this algorithm at the first stage. CL(cutter location) data are obtained by deleting the loop section of intersected offset patches at the second stage. This algorithm can reduce the amount of memory required to store machining data and also easily check region which have the possibility of intersection. Also, This software is verified to be useful in machining a curved object on a DNC milling machine.

• ETRI Journal
• /
• 제38권5호
• /
• pp.988-995
• /
• 2016

In this paper, we present a new specific and customized interface tool with parameter identification of Modified Butterworth-Van Dyke models for ladder bulk acoustic wave filters. The aforementioned tool is easy to use and flexible because it allows simulations and reengineering to be conducted in an application. A modular design approach is applied to simplify the extension of the proposed tool for different topologies. The proposed tool was validated using measurements from an aluminum-nitride based ladder BAW filter dedicated to the frequency ranges of the Universal Mobile Telecommunications Service and standards and Wideband Code Division Multiple Access.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.121-127
• /
• 2008

Micro end-milling has been becoming an important machining process to manufacture a number of small products such as micro-devices, bio-chips, micro-patterns and so on. Despite the importance of micro end-milling, many related researches have given grand efforts to micro end-milling phenomenon, for example, micro end-milling mechanism, cutting force modeling and machinability. This paper strongly concerned actual problem, micro tool deflection, which causes excessive machining errors on the workpiece. To solve this problem, machining error prediction method was proposed through a series of test micro cutting and analysis of their SEM images. An iterative algorithm was applied in order to obtain corrected tool path which allows reducing machining errors in spite of tool deflection. Experiments are carried out to validate the proposed approaches. In result, remarkable error reduction could be obtained.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.31-37
• /
• 2001

In this paper, we developed an automated program for the modeling and simulation of three-dimensional roller gear cam mechanisms. The three-dimensional modeling for a roller-gear cam employs coordinate transformations based on the con-tact condition. the wire frame modeling followed by the shading technique using triangular meshing elements incorporat-ed the to reduce the number of data and computational load. Computer simulations for two kinds of products for rollger-gear cam mechansim illustrate the relative motion between the modeled roller-gear cam and a turret and thus show the effectiveness of the proposed modeling.