• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.1
• /
• pp.121-126
• /
• 2003

In this paper, we propose a new wavelet-based fuzzy modeling using a DNA coding method. Generally, it is well known that the DNA coding method is more diverse in the knowledge expression and better in the optimization performance than the genetic algorithm (GA) because it can encode more plentiful genetic informations based on the biological DNA. The proposed method can construct a fuzzy model using the wavelet transform, in which the coefficients are identified by the DNA coding method. Thus, we can effectively get the fuzzy model of the nonlinear system by using the advantages of both wavelet transform and DNA coding method. In order to demonstrate the superiority of the proposed method, it is compared with modeling method using the conventional GA.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.5
• /
• pp.431-438
• /
• 2017

The information management system for urban planning, urban management and related decision making is increasing an importance in recent years. Especially, the information about 3D buildings in urban area is necessary for urban management related precise location based service. However, it takes a lot of time, effort, and costs to produce 3D modeling data of buildings. These problems have been found in many studies, but the research to solve these problems is still necessary. In this study, we have tested an efficient 3D modeling method of building to solve these problems. SketchUp was used to test 3D modeling methods with OSM(OpenStreetMap) data. The other 3D modeling method using a digital map was tested. The 3D modeling of building data was efficient using PlaceMaker, which can use OSM data. In addition, modeling was possible through simple editing of the digital map and automatic building generation. The efficiency of the research results is presented by comparing with the traditional method based on the regulation and the stadard man power issued by Korean government. These two 3D modeling methods of building tested through the study can be used as basic data for related research and work. Additional studies should be conducted to improve the accuracy of the building model and determine how to obtain height data efficiently.

• The Mathematical Education
• /
• v.48 no.4
• /
• pp.365-385
• /
• 2009

Recently, mathematical modeling has been attractive in that it could be one of many efforts to improve students' thinking and problem solving in mathematics education. Mathematical modeling is a non-linear process that involves elements of both a treated-as-real world and a mathematics world and also requires the application of mathematics to unstructured problem situations in real-life situation. This study provides analysis of literature review about modeling perspectives, case studies about mathematical modeling, and textbooks from the United States and Korea with perspective which mathematical modeling could be potential and meaningful to students even in elementary school. Further, teaching method with mathematical modeling was investigated to see the possibility of application to elementary mathematics classroom.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.10
• /
• pp.718-723
• /
• 2012

The purpose of this study is to propose modeling method of Underfloor Air Distribution System with reliability and validity by comparing characteristics of modeling methods. For this, the modeling methods of UFAD were selected by investigating various modeling methods of previous researches. Then, simulations were conducted by using EnergyPlus which is dynamic analysis program of building energy. Annual energy consumption for each method was compared with a wide range of indoor thermal loads. As a result, the methodology of reducing internal gains can cause under sizing of the system. It suggests modeling methods to reflect occupied zone air-conditioning, temperature stratification and supply plenum which are the main characteristics of UFAD.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.2
• /
• pp.281-287
• /
• 1997

In the conventional inverse modeling method for on-line modeling of the secondary path transfer function, the signal to noise ratio between the arbitrary random signal and the plant noise have to keep at -10 - -20 dB. For these reasons, the modeling can't be exactly implemented by the conventional method alone and the convergence time for modeling becomes too long. In this study, by combining the conventional inverse modeling method with an adaptive line enhancer, or with an adaptive noise canceller, a rigorous transfer functions of secondary path modeling and the control of a primary noise have been implemented simultaneously.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2266-2273
• /
• 2000

Equations of motion of a multi-beam system undergoing overall rigid body motion are derived by employing finite element method. An orientation angle is employed to allow the arbitrary orientation o f the beam element. Modal coordinate reduction technique, which has been successfully utilized in the conventional linear modeling method, is employed for the present modeling method to reduce the computational effort. Different from the conventional linear modeling method, the present modeling method captures the motion-induced stiffness variations which are important for the dynamic analysis of structures undergoing overall rigid body motion. The numerical results are compared to those of a commercial program to verify the reliability of the present method.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.197-204
• /
• 2003

This paper presents an efficient modeling and dynamic analysis method for open cracked beam structures. An equivalent bending spring model is introduced to represent the structural weakening effect in the presence of cracks. The proposed method adopts the exact dynamic element method (EDEM) to avoid the inconvenience and numerical errors in association with re-meshing the structural model with the crack position changed. The proposed modeling method is validated through a series of simulation and experiments. First, the proposed method is rigorously compared with a commercial finite element code. Then, two kinds of experiments are performed to validate the proposed modeling method. Finally, a diagnostic scheme fur open cracked beam structures is proposed and demonstrated through a numerical example.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.814-819
• /
• 2003

Machine tool design concepts have evolved towards high efficiency, accurate precision. high structural integrity, and multi-functional systems. Like many other structures, machine tools are also composed of many parts. When these parts are assembled, many kinds of joints are used. In the finite element analysis of these assembled structures, most joints are commonly considered as rigid joints. But, to get the more accurate solution, we need to model these joints in a appropriate manner. In this study, rational dynamic modeling and analysis method for complex structures are studied with special attention to slide way joints. For modeling of slide way joints, a general modeling technique is used by influence coefficients method which is applied to the conversion of detailed finite element model to the equivalent reduced joint model. The theoretical part of this method is illustrated and the method is applied to the structure with slide way joint. In this method. the non-linearity of the contact surfaces is considered within a proper range and the boundary effect of the joint model can be eliminated. The proposed method was applied to finite element modal analysis of a clamp jointed cantilever beam and slide way joints of the vertical type lathe. The method can also be used to other kinds of joint modeling. The results of these analysis were compared with those of Yoshimura models and rigid joint models. which demonstrated the practical applicability of the proposed method.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.13-22
• /
• 2010

For implementing TMDL(Total Maximum Daily Loading) to adopt more effective management of water pollution, water quality modeling is pre-requisite and such modeling requires the extraction of stream centerline. The institutes responsible for the water quality modeling, however, generates the stream centerline with their own criteria and this lead to low accuracy of the extracted centerline as well as different modeling results for the same watershed. Therefore, this study mainly focused on the development of extraction method of the stream centerline. For that, an automated method has been developed through the integration of the centerline extraction method using a maximum inscribed circle with GIS. The result has shown that the newly developed method could enable to represent more details of the stream topography along with enhanced accuracy compared with conventional extraction method. Furthermore, the new method can afford centerline extraction for the island areas which has been the limitation of the conventional method thereby supporting water quality modeling in a detailed level.

• Journal of Environmental Impact Assessment
• /
• v.12 no.4
• /
• pp.245-257
• /
• 2003

$SO_2$ concentrations in the Seoul Metropolitan Area (SMA) were predicted by the regional segment ISCST3 modeling. The SMA was segmented by three modeling regions where the weather monitoring station exists since the area of the SMA, approximately $100km{\times}100km$, is too wide to be modeled by one modeling domain. The predicted concentrations by the model were compared with the measured concentrations at 39 air monitoring stations located in the SMA to validate the ISCST3 modeling coupled with the regional segment approach. The predicted concentrations by the regional segment method showed better performance in depicting the measurements than those by the non-segment ISCST3 modeling. The correction methods of the calculated concentrations reviewed were here the correlation method by the first order linear equation and the ratio method of observed to calculated concentrations. The corrected concentrations by two methods showed good agreement with the measured data. The ratio method was, however, easily applicable to the concentration correction in case of a wide modeling region considered in this study.