• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.1
• /
• pp.119-126
• /
• 2020

This study analyzed the effects of future climate change on water resources in the Gyeongan-cheon watershed of the Han River. Considering the uncertainties of GCM climate data, future data using 16 GCMs and SQM downscaling method are used. And SWAT model was applied to simulate the hydrological changes from the past to the future. The maximum to minimum difference according to GCM for the future period (2010-2099) was about 1,500 mm of annual precipitation, 150 mm of evapotranspiration, 1,380 mm of runoff, and the deviation from the mean was -40 % to +60 % of precipitation, ±15 % of evapotranspiration, -60 % to +90 % of runoff, which means that the variability is very high according to GCM. The impacts of climate change over the three future periods showed that precipitation, evapotranspiration, and runoff were expected to increase gradually toward the far future (2070-2099), and would be relatively larger under the RCP 8.5 scenario. On a monthly basis, it was analyzed that precipitation and runoff increased in July to September, while the evapotranspiration decreased in July and August, and increased in September and October. The results of this study are expected to be helpful in understanding the future climate impacts of various GCM data and the uncertainties associated with GCMs.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.1
• /
• pp.94-98
• /
• 1985

A laboratory experiment was conducted to find out the denitrification rate upon the different levels of nitrogen fertilizer in submerged sandy soil. The results obtained were summarized as follows: 1. The highest denitrification rate was observed at 25 days after incubation. The amount was reached at 1830 ug/100g soil for 20mg nitrogen was applied in 100g soil. 2. Increases of fertilizer nitrogen was enhanced the rate of ammonification and nitrification during the incubation time. 3. Deep correlation was observed between the denitrification capacities which was determined as nitrous oxide and Mitchaelis-Menten kinetic with relation to nitrate concentration. More higher denitrification rates were observed in Mitchaelis-Menten kinetic than dentrification rate with determined as nitrous oxide. 4. A Zero order (with relation to nitrate concentration) kinetic model for denitrification was presented in this experiment condition to illustrate the variability of nitrous oxide concentrations in the submerged soil atmosphere.

• Journal of KIISE:Software and Applications
• /
• v.30 no.5_6
• /
• pp.398-413
• /
• 2003

Component-based Software Development(CBSD) supported by both component and reusability can reduce development time and cost, and also can achieve high productivity. To support component reusability systematically domain analysis and design in parallel with CBSD-process is needed. And also it is needed to suggest objective analysis process to fine out commonality and variability in domain, which is lacked in current domain analysis and design method. And to abstract domain component from the information which is well reflected in domain model, and to express it in domain architecture is needed. In this paper, we suggest the method to define, analyze and design domain systematically for enhancing reusability effectively in Component-base Software Development. We abstract components which can be reusable in domain, in other word, which have commonality from requirement analysis level. We sustain and refine them. And we reflect them to the products of each level. From these process, we can produce the domain component which have commonality. On this basis, we can design domain architecture. In this paper, to produce reusable software we investigate new systematic approach to domain analysis and design from the view point of software reusability.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.19-31
• /
• 2007

When estimating the benefits from an investment project in the transportation sector, errors caused by many factors may exist. This study focuses on user equilibrium traffic assignment methods and stopping criteria. According to previous studies, when using a user equilibrium assignment model, the benefits of travel time savings can be effected by the relative gap value. As the stopping criteria decreases, the time needed for traffic assignment increases, so that lowering the criteria cannot be the best solution. Therefore, an effort is necessary to reduce this change rate and thus improve reliability. This paper considers three methods: reducing the links subject to benefit calculation, extracting sub-area O/D tables and networks, and applying the mean value of successive traffic assignment results. The results of the analysis show that the method using the mean value of five results is more proper than the other methods. Using the sub-area analysis method, if the study area is small the benefits of a project might be over- or under-estimated. This paper used a nationwide O/D table and network at peak time as a case study. The resulting patterns can differ according to basic data to be used in analysis. So further analysis using the data from metropolitan areas are needed.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.4
• /
• pp.1-11
• /
• 2003

In order to measure aperture variation dependent on normal stress and to characterize on relationship between aperture variation and hydraulic conductivity this study measured apertures of rock fractures under a high resolution confocal laser scanning microscope (CLSM) with application of five stages of uniaxial normal stresses. From this method the response of aperture can be continuously characterized on one specimen by different loads of normal stress. The results of measurements showed a rough geometry of fracture bearing non-uniform aperture. They also revealed different values of aperture variations according to the load stages on each position along a fracture due to the fracture roughness. Laboratory permeability tests were also conducted to evaluate the changes of permeability coefficients related to the aperture variations by different loads. The results of permeability tests revealed that the hydraulic conductivity was not reduced at a fixed rate with increase of normal load. Moreover, the rates of aperture variations did not match to those of hydraulic conductivity. The hydraulic conductivity calculated in this study did not follow the cubic law, representing that the parallel plate model is not suitable to express the fracture geometry corresponding to the results of aperture measurements under the CLSM.

• Reproductive and Developmental Biology
• /
• v.36 no.3
• /
• pp.183-188
• /
• 2012

The bovine fatty acid binding protein 4 and 5 (FABP4 and 5) is a major positional and physiological candidate gene for the bovine marbling and carcass weight. The aim of this study was to evaluate the association between economic traits of Korean cattle (Hanwoo) and genetic variation in fatty acid binding protein 4 and 5 (FABP4 and 5) genes within carcass/meat quality traits and the before/after of fatting in breed Hanwoo. Here, we characterized the nucleotide polymorphism of FABP4 and 5 in 86 cattle. We were detected the variability of three types (GG, AG, and AA) by PCR, and economic traits were analyzed by the mixed regression model implemented in the ASReml program. As the result of statistical and supersonic analysis, FABP4 gene was highly showed significant effect (p<0.006) on marbling score (MS), in contrast FABP5 gene was lowed (p<0.084) on MS before fatting. But, FABP4 gene was highly showed significant effect (p<0.0054) on MS, in contrast FABP5 gene lowest (p<0.0899) on MS in the after of fatting. Compare to supersonic result before fatting in FABP4 gene, it was detected type GG: (p<7.18), AG: (p<8.50), and AA: (p<10.50) (n=50), showed type GG: (p<4.88), AG: (p<2.33), and AA: (p<0.00) after weed out (n=20). Futhermore, it was detected type GG: (p<9.30), AG: (p<7.95), and AA: (p<7.40) (n=50) before fatting in the FABP5 gene. It was shown type GG: (p<2.67), AG: (p<3.50), and AA: (p<5.00) after weed out (n=50). Our results indicate that FABP4 and 5 gene transcription is regulated by the environment of feeding and management, and suggest that feeding and management could be potential key in determining FABP4 and 5 genes transcription for carcass/meat quality traits in breed Hanwoo.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.509-520
• /
• 2018

The impact of meteorological condition on surface $PM_{10}$ concentrations in South Korea was quantitatively simulated from 2010 to 2014 using WRF (ver.3.8.1) and CMAQ (5.0.2) model. The result showed that seasonal standard deviations of PM10 induced by change of weather conditions were $4.8{\mu}g/m^3$, $1.7{\mu}g/m^3$, $1.7{\mu}g/m^3$, $4.2{\mu}g/m^3$ for spring, summer, autumn and winter compared to 2010, respectively, with the annual mean standard deviation of about $2.6{\mu}g/m^3$. The results of 18 regions in South Korea showed standard deviation of more than $1{\mu}g/m^3$ in all regions and more than $2{\mu}g/m^3$ in Seoul, Northern Gyeonggi, Southern Southern Gyeonggi, Western Gangwon and Northern Chungcheong in South Korea.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.2
• /
• pp.123-132
• /
• 2000

Evaluation method of soil fertility by combination of soil color characteristics and survey data from soil map as well as chemical properties was investigated on total 35 field and pot experiments. Total 35 tobacco fields including 11 fields located at Cheonweon county in Chungnam Province, 9 fields located at Goesan county in Chungbuk Province, and 15 fields located at Youngcheon county in Kyongbuk Province were selected in 1984 to cover the wide range of distribution in landscape and soil attributes. Yields of tobacco grown on the plots of both the pot and field experiment which were not applied with any fertilizer were considered as basic fertility of the soil (BFS). The BFS was estimated by 32 independent variables including 15 chemical properties, 3 color characteristics, and 14 soil survey data from soil map. Twenty-four independent variables containing 16 quantitative variables selected from 24 quantitative variables by collinearity diagnostics and 8 qualitative variables, were classified and analyzed by multiple linear regression (MLR) of REG and GLM models of SAS. Tobacco yield of field experiment showed high variations by eight times in difference between minimum and maximum yield indicating the diverse soil fertility among the experimental fields. Evaluation for the BFS by the MLR including quantitative variables was still more confidential than that by a single index and that showed more improvement of coefficient of determination ($R^2$) in pot experiment than in field experiment. Evaluation for the BFS by MLR in field experiment was still improved by adding qualitative variables as well as quantitative variables. The variability in the BFS of field experiment was explained 43.2% by quantitative variables and 67.95% by adding both the quantitative and qualitative variables compared with 21.7% by simple regression with NO$_3$-N content in soil. The regression evaluation for the best evaluation of the BFS of field experiment by MLR included NO$_3$-N content, L value, and a value of soil color as quantitative variables and available soil depth and topography as qualitative variables. Consequently, it is assumed that this approach by the MLR including both the quantitative and qualitative variables was available as an evaluation model of soil fertility for tobacco field.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.93-104
• /
• 1982

DTM data evaluation regards accuracy and efficiency as its most important parameters, and these two elements are sensitively influenced by the sampling technique employed and its procedure. This study attempts to improve sampling techniques and evaluate the accuracy of DTM based on earth volume calculation, using aerial photography and field survey information as basic DTM data, and a regular grid and progressive sampling method for sampling process. Especially, the progressive sampling has employed different combinations of threshold and sampling criteria, that is, parameters influential on efficiency and accuracy, for the purpose of numerical tests intended to permit comparative analysis. The tests have resulted in the findings that in progressive sampling its grid density fits in well with given terrain characteristics in proportion to their variability. and that threshold and accuracy contain close mutual relations in which an increased threshold bringing more efficency but less accuracy. It follows, therefore. that a threshold, when appropriately determined, can be of very efficient use for considerably broad applications, and particularly, will play a significant role in its application to such general civil engineering as earth volume calculation.

• 한국해양학회지
• /
• v.25 no.1
• /
• pp.8-20
• /
• 1990

A series of pore water data were obtained during the different time over one year period between October 1987 and October 1988, from a site on a muddy intertidal flat, located in the Kyeong-gi Bay, west coast of Korea, The results have revealed that the tidal flat is an environment of active nutrient the subface supplied by the overlying seawater is almost completely removed from the pore water at depth of about 10 cm below the sediment surface. The nutrients such as ammonium and phosphate are produced through this process and subsequently accumulated in the pore water forming steep gradients near the sediment surface. Below the main sulfate redirection zone, a secondary peak of dissolved sulfate was often observed. Greal seasonal variation of the pore water nutrient profiles was observed, which was particularly clear in their maximum concentration as well as in their concentration gradient. The rate constants of sulfate reduction and nutrient regeneration, estimated by using a diagenetic model (Berner, 1980), differ by an order of magnitude between the summer and winter seasons. The difference in sediment temperature may account for most of the calculated variation. The C:N:P ratio, calculated from the pore water nutrient gradients also exhibits a slight seasonal difference. The organic matter being decomposed by sulfate reduction appears to be depleted in depleted in nitrogen, compared to the average marine organic matter.