• Journal of the Korea Computer Graphics Society
• /
• v.28 no.2
• /
• pp.29-41
• /
• 2022

In this paper, we introduce a novel real-time, interactive animation system which uses real-time motion inputs from a low-cost motion-sensing device Kinect. Our system generates interaction motions between the user character and the counterpart character in real-time. While the motion of the user character is generated mimicking the user's input motion, the other character's motion is decided to react to the user avatar's motion. During a pre-processing step, our system analyzes the reference motion data and generates mapping model in advance. At run-time, our system first generates initial poses of two characters and then modifies them so that it could provide plausible interacting behavior. Our experimental results show plausible interacting animations in that the user character performs a modified motion of user input and the counterpart character properly reacts against the user character. The proposed method will be useful for developing real-time interactive animation systems which provide a better immersive experience for users.

• Animal Bioscience
• /
• v.36 no.1
• /
• pp.29-42
• /
• 2023

Objective: Pigs, an ideal biomedical model for human diseases, suffer from about 50% early embryonic and fetal death, a major cause of fertility loss worldwide. However, identifying the causal variant remains a huge challenge. This study aimed to detect single nucleotide polymorphisms (SNPs) and candidate genes for the number of mummified (NM) piglets using the imputed whole-genome sequence (WGS) and validate the potential candidate genes. Methods: The imputed WGS was introduced from genotyping-by-sequencing (GBS) using a multi-breed reference population. We performed genome-wide association studies (GWAS) for NM piglets at birth from a Landrace pig populatiGWAS peak located on SSC11: 0.10 to 7.11 Mbp (Top SNP, SSC11:1,889,658 bp; p = 9.98E-13) was identified in cyclin dependent kinase on. A total of 300 Landrace pigs were genotyped by GBS. The whole-genome variants were imputed, and 4,252,858 SNPs were obtained. Various molecular experiments were conducted to determine how the genes affected NM in pigs. Results: A strong GWAS peak located on SSC11: 0.10 to 7.11 Mbp (Top SNP, SSC11:1,889,658 bp; p = 9.98E-13) was identified in cyclin dependent kinase 8 (CDK8) gene, which plays a crucial role in embryonic retardation and lethality. Based on the molecular experiments, we found that Y-box binding protein 1 (YBX1) was a crucial transcription factor for CDK8, which mediated the effect of CDK8 in the proliferation of porcine ovarian granulosa cells via transforming growth factor beta/small mother against decapentaplegic signaling pathway, and, as a consequence, affected embryo quality, indicating that this pathway may be contributing to mummified fetal in pigs. Conclusion: A powerful imputation-based association study was performed to identify genes associated with NM in pigs. CDK8 was suggested as a functional gene for the proliferation of porcine ovarian granulosa cells, but further studies are required to determine causative mutations and the effect of loci on NM in pigs.

• Journal of Wetlands Research
• /
• v.24 no.2
• /
• pp.115-122
• /
• 2022

As the impermeable area of soil increases due to urbanization, the water circulation system of the city is deteriorating. The existing guidelines for low impact development (LID) facilities installed to solve these water problems or in previous studies, engineering aspects are more prominent than landscaping aspects. This study attempted to present an engineering and landscaping model for reducing pollutants by identifying the effects of vegetation on rainfall outflows and pollutant reduction in bioretention and the economic aspects of planting. Based on the results of artificial rainfall monitoring at Jeonju Seogok Park and the literature on vegetation rainfall runoff and pollutant reduction performance, the best vegetation for reducing pollution compared to cost was Lythrum salicaria L and Salix gracilistyla Miq. was the best vegetation for carbon storage. If you insist to design plants with only these two plantation, there is no choice but to take risks such as biodiversity. Herbaceous plants such as Lythrum salicaria L can be replaced by death of the plants or pests if considered planting various plants. The initial planting cost could expensive, but it is also necessary to mix and plant Salix gracilistyla Miq, which are woody plants that are advantageous in terms of maintenance, according to the surrounding environment and conditions. Based on the conclusions drawn in this study, it can be a reference material when considering the reduction of pollution by species and carbon storage of vegetation in LID facilities.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.17-33
• /
• 2007

Downhole seismic method is widely used for obtaining shear wave velocity profile of a site because it is simple and economical. Determining accurate travel time of shear wave is very important to obtain reliable result in downhole seismic method. In this paper, comparison study of various travel time determination methods was performed. Numerical study and model chamber test were performed for effective comparison study. Signal traces were acquired by performing downhole test at each numerical simulation and soil box test. Travel time data for each signal traces were determined by using six different methods and Vs profiles were evaluated. Comparing travel time data and Vs profiles with the reference value, the first arrival picking method proved to be ambiguous and unreliable. Other methods also did not always provide accurate results and the magnitude of error was dependent on the signal to noise ratio. Cross-correlation method proved to be the most adequate method for the field application and it was verified additionally with field data.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.97-103
• /
• 2009

In this thesis, we discuss the implementation of parallel processing system which is able to get a high degree of efficiency(size, cost, performance and flexibility) by using $Nios^{(R)}$ II(32bit RISC(Reduced Instruction Set Computer) processor) embedded processor in DE2-$70^{(R)}$ reference board. The designed Parallel processing system is master-slave, shared memory and MIMD(Mu1tiple Instruction-Multiple Data stream) architecture with 4-processor. For performance test of system, N-point FFT is used. The result is represented speed-up as follow; in the case of using 2-processor(core), speed-up is shown as average 1.8 times as 1-processor's. When 4-processor, the speed-up is shown as average 2.4 times as it's.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.1
• /
• pp.1-14
• /
• 2022

In order to conduct rapid, accurate and safe surveying at the excavation site, In this study, the possibility of underground facility survey using drones and the expected effect of 3D visualization were obtained as follows. Phantom4Pro 20MP drones have a 30m flight altitude and a redundant 85% flight plan, securing a GSD (Ground Sampling Distance) value of 0.85mm and 4points of GCP (Groud Control Point)and 2points of check point were calculated, and 7.3mm of ground control point and 11mm of check point were obtained. The importance of GCP was confirmed when measured with low-cost drones. If there is no ground reference point, the error range of X value is derived from -81.2 cm to +90.0 cm, and the error range of Y value is +6.8 cm to 155.9 cm. This study classifies point cloud data using the Pix4D program. I'm sorting underground facility data and road pavement data, and visualized 3D data of road and underground facilities of actual model through overlapping process. Overlaid point cloud data can be used to check the location and depth of the place you want through the Open Source program CloudCompare. This study will become a new paradigm of underground facility surveying.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1460-1467
• /
• 2023

A robust approach was conducted to determining the absolute oral bioavailable (f_ab) fractions of ²³⁸U and ²³²Th in rats exposed to contaminated soil along with their hematotoxicity and nephrotoxicity. The soil sample is the International Atomic Energy Agency-312 (IAEA-312) certified reference material, whereas blood, bones, and kidneys of in vivo female Sprague-Dawley (SD) rats estimate ²³⁸U- and ²³²Th-f_ab fractions post-exposure. We predict the bioavailable concentration (C_ab) and f_ab values of ²³⁸U and ²³²Th after acute soil ingestion. The blood ²³⁸U (0.750%) and ²³²Th (0.028%) reach their maximum f_ab values after 48 h. The ²³⁸U (f_ab: 0.169-0.652%) accumulates mostly in the kidney, whereas the ²³²Th (f_ab: 0.004-0.021%) accumulates primarily in the bone. Additionally, ²³⁸U is more bioavailable than ²³²Th. Post 48 h acute ingestion demonstrates noticeable histopathological and hematological alterations, implying that intake of ²³⁸U in co-contaminated soil can lead to erythrocytes and proximal tubules damage, whereas, ²³²Th intake can harm erythrocytes. Our study provides new directions for future research into the health implications of acute oral exposures to ²³⁸U and ²³²Th in co-contaminated soils. The findings offer significant insight into the utilization of in vivo SD rat testing to estimate ²³⁸U and ²³²Th bioavailability and toxicity in exposure assessment.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.34-41
• /
• 2022

Recently, digital technology and computer-aided design/computer-aided manufacturing (CAD/CAM) environment have changed the clinician treatment method in the fabrication of dentures. The denture manufacturing method with CAD/CAM technology simplifies the treatment and laboratory process to reduce the occurrence of errors and provides clinical efficiency and convenience. In this case, complete dentures were fabricated using stereolithography (SLA)-based 3D printing in patient with mandibular deviation. Recording base were produced in a digital model obtained with an intraoral scanner, and after recording a jaw relation in the occlusal rim, a definitive impression was obtained with polyvinyl siloxane impression material. In addition, facial scan data with occlusal rim was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a Food and Drug Administration (FDA)-approved liquid photocurable resin. The denture showed adequate retention, support and stability, and results were satisfied functionally and aesthetically.

• Journal of Technologic Dentistry
• /
• v.45 no.2
• /
• pp.31-38
• /
• 2023

Purpose: This in vitro study aimed to compare the trueness of 3-unit fixed dental provisional prostheses (FDPs) fabricated by three different additive manufacturing and subtractive manufacturing procedures. Methods: A reference model with a maxillary left second premolar and the second molar prepped and the first molar missing was scanned for the fabrication of 3-unit FDPs. An anatomically shaped 3-unit FDP was designed on computer-aided design software. 10 FDPs were fabricated by subtractive (MI group) and additive manufacturing (stereolithography: SL group, digital light processing: DL group, liquid crystal displays: LC group) methods, respectively (N=40). All FDPs were scanned and exported to the standard triangulated language file. A three-dimensional analysis program measured the discrepancy of the internal, margin, and pontic base area. As for the comparison among manufacturing procedures, the Kruskal-Wallis test and the Mann-Whitney test with Bonferroni correction were evaluated statistically. Results: Regarding the internal area, the root mean square (RMS) value of the 3-unit FDPs was the lowest in the MI group (31.79±6.39 ㎛) and the highest in the SL group (69.34±29.88 ㎛; p=0.001). In the marginal area, those of the 3-unit FDPs were the lowest in the LC group (25.39±4.36 ㎛) and the highest in the SL group (48.94±18.98 ㎛; p=0.001). In the pontic base area, those of the 3-unit FDPs were the lowest in the LC group (8.72±2.74 ㎛) and the highest in the DL group (20.75±2.03 ㎛; p=0.001). Conclusion: A statistically significant difference was observed in the RMS mean values of all the groups. However, in comparison to the subtractive manufacturing method, all measurement areas of 3-unit FDPs fabricated by three different additive manufacturing methods are within a clinically acceptable range.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.417-428
• /
• 2023

The demolition of domestic infrastructures mirrors other significant construction initiatives in presenting a markedly high accident rate. A comprehensive investigation into the origins of such accidents is crucial for the prevention of future incidents. Upon detailed inspection, the causes of demolition construction accidents are multifarious, encompassing unsafe worker behavior, hazardous conditions, psychological and physical states, and site management deficiencies. While statistics relating to demolition construction accidents are consistently collated and reported, there exists an exigent need for a more foundational cause categorization system based on accident type. Drawing from Heinrich's Domino Theory, this study classifies the origins of accidents(unsafe behavior, unsafe conditions) and human errors(human factors) as per the type of accidents experienced during demolition construction. In this study, a three-step model of QFD-FMEA(Quality Function Deployment - Failure Mode Effect Analysis) is employed to systematically categorize accident causes according to the types of accidents that occur during demolition construction. The QFD-FMEA method offers a technique for cause classification at each stage of the demolition process, including direct causes(unsafe behavior, unsafe environment), and human errors(human factors) through a tri-stage process. The results of this accident cause classification can serve as safety knowledge and reference checklists for accident prevention efforts.