• Title/Summary/Keyword: Model of Innovation Resistance

Search Result 89, Processing Time 0.031 seconds

A Study on the Policy Direction for the Introduction and Activation of Smart Factories by Korean SMEs (우리나라 중소기업의 스마트 팩토리 수용 및 활성화 제고를 위한 정책 방향에 대한 연구)

  • Lee, Yong-Gyu;Park, Chan-Kwon
    • Korean small business review
    • /
    • v.42 no.4
    • /
    • pp.251-283
    • /
    • 2020
  • The purpose of this study is to provide assistance to the establishment of related policies to improve the level of acceptance and use of smart factories for SMEs in Korea. To this end, the Unified Technology Acceptance Model (UTAUT) was extended to select additional factors that could affect the intention to accept technology, and to demonstrate this. To achieve the research objective, a questionnaire composed of 7-point Likert scales was prepared, and a survey was conducted for manufacturing-related companies. A total of 136 questionnaires were used for statistical processing. As a result of the hypothesis test, performance expectation and social influence had a positive (+) positive effect on voluntary use, but effort expectation and promotion conditions did not have a significant effect. As an extension factor, the network effect and organizational characteristics had a positive (+) effect, and the innovation resistance had a negative effect (-), but the perceived risk had no significant effect. When the size of the company is large, the perceived risk and innovation resistance are low, and the level of influencing factors for veterinary intentions, veterinary intentions, and veterinary behaviors are excluded. Through this study, factors that could have a positive and negative effect on the adoption (reduction) of smart factory-related technologies were identified and factors to be improved and factors to be reduced were suggested. As a result, this study suggests that smart factory-related technologies should be accepted.

Attitude Confidence and User Resistance for Purchasing Wearable Devices on Virtual Reality: Based on Virtual Reality Headgears (가상현실 웨어러블 기기의 구매 촉진을 위한 태도 자신감과 사용자 저항 태도: 가상현실 헤드기어를 중심으로)

  • Sohn, Bong-Jin;Park, Da-Sul;Choi, Jaewon
    • Journal of Intelligence and Information Systems
    • /
    • v.22 no.3
    • /
    • pp.165-183
    • /
    • 2016
  • Over the past decade, there has been a rapid diffusion of technological devices and a rising number of various devices, resulting in an escalation of virtual reality technology. Technological market has rapidly been changed from smartphone to wearable devices based on virtual reality. Virtual reality can make users feel real situation through sensing interaction, voice, motion capture and so on. Facebook.com, Google, Samsung, LG, Sony and so on have investigated developing platform of virtual reality. the pricing of virtual reality devices also had decreased into 30% from their launched period. Thus market infrastructure in virtual reality have rapidly been developed to crease marketplace. However, most consumers recognize that virtual reality is not ease to purchase or use. That could not lead consumers to positive attitude for devices and purchase the related devices in the early market. Through previous studies related to virtual reality, there are few studies focusing on why the devices for virtual reality stayed in early stage in adoption & diffusion context in the market. Almost previous studies considered the reasons of hard adoption for innovative products in the viewpoints of Typology of Innovation Resistance, MIR(Management of Innovation Resistant), UTAUT & UTAUT2. However, product-based antecedents also important to increase user intention to purchase and use products in the technological market. In this study, we focus on user acceptance and resistance for increasing purchase and usage promotions of wearable devices related to virtual reality based on headgear products like Galaxy Gear. Especially, we added a variables like attitude confidence as a dimension for user resistance. The research questions of this study are follows. First, how attitude confidence and innovativeness resistance affect user intention to use? Second, What factors related to content and brand contexts can affect user intention to use? This research collected data from the participants who have experiences using virtual rality headgears aged between 20s to 50s located in South Korea. In order to collect data, this study used a pilot test and through making face-to-face interviews on three specialists, face validity and content validity were evaluated for the questionnaire validity. Cleansing the data, we dropped some outliers and data of irrelevant papers. Totally, 156 responses were used for testing the suggested hypotheses. Through collecting data, demographics and the relationships among variables were analyzed through conducting structural equation modeling by PLS. The data showed that the sex of respondents who have experience using social commerce sites (male=86(55.1%), female=70(44.9%). The ages of respondents are mostly from 20s (74.4%) to 30s (16.7%). 126 respondents (80.8%) have used virtual reality devices. The results of our model estimation are as follows. With the exception of Hypothesis 1 and 7, which deals with the two relationships between brand awareness to attitude confidence, and quality of content to perceived enjoyment, all of our hypotheses were supported. In compliance with our hypotheses, perceived ease of use (H2) and use innovativeness (H3) were supported with its positively influence for the attitude confidence. This finding indicates that the more ease of use and innovativeness for devices increased, the more users' attitude confidence increased. Perceived price (H4), enjoyment (H5), Quantity of contents (H6) significantly increase user resistance. However, perceived price positively affect user innovativeness resistance meanwhile perceived enjoyment and quantity of contents negatively affect user innovativeness resistance. In addition, aesthetic exterior (H6) was also positively associated with perceived price (p<0.01). Also projection quality (H8) can increase perceived enjoyment (p<0.05). Finally, attitude confidence (H10) increased user intention to use virtual reality devices. however user resistance (H11) negatively affect user intention to use virtual reality devices. The findings of this study show that attitude confidence and user innovativeness resistance differently influence customer intention for using virtual reality devices. There are two distinct characteristic of attitude confidence: perceived ease of use and user innovativeness. This study identified the antecedents of different roles of perceived price (aesthetic exterior) and perceived enjoyment (quality of contents & projection quality). The findings indicated that brand awareness and quality of contents for virtual reality is not formed within virtual reality market yet. Therefore, firms should developed brand awareness for their product in the virtual market to increase market share.

A Study on the Activation of Sharing Cyber-Threat Information among Businesses (기업의 사이버위협정보 공유 활성화에 관한 연구)

  • Seokeon Choe;Jongsub Lee;Geunsun Tak;Joowon Choi
    • KIPS Transactions on Computer and Communication Systems
    • /
    • v.12 no.4
    • /
    • pp.143-156
    • /
    • 2023
  • The domestic threat information sharing system to deal with various security threats in the rapidly changing cyber environment needs to be improved. In this study, to solve these problems and promote the activation of threat information sharing, we derive a research model based on the value-based containment model (VAM) for vital factors in information sharing. After conducting a Ricardian 5-point survey on a total of 204 individuals, the statistical results of the first 151 individuals were analyzed using SPSS and AMOS, and the statistical results of the second 204 individuals were analyzed using R-Studio. As a result, perceivability was found to have a significant impact as a core factor in the activation of cyber threat information sharing (β=0.405, p<0.01), and the hindrance factor was analyzed as innovation resistance (β=-0.152, p<0.01). Microscopically, the obtained results can be applied to factor analysis for activating information sharing of cyber threats by companies in the future, and macroscopically, they can contribute to the foundational development of a national cyber threat response system.

An Empirical Study on the Impact of the Perception of the Monitoring Function on Effective BPMS Adoption (모니터링 기능에 대한 인식이 효과적인 BPMS 도입에 미치는 영향)

  • Chae, Myung-Sin;Park, Jin-Suk;Lee, Byung-Tae
    • Asia pacific journal of information systems
    • /
    • v.17 no.3
    • /
    • pp.105-130
    • /
    • 2007
  • Recently, there is a substantial interest in implementing Business Process Management System(BPMS) among enterprises with the purpose of business process innovation. BPMS redesigns and coordinates business processes in terms of both automated steps and human involvement in order to maximize the value of both involved people and systems. The reason why BPMS is getting attention from top managers is that it has the possibility to optimize the business processes by cycling the process of modeling, execution, monitoring, evaluation, and redesigning work processes. Thus, it has created high expectations about not only productivity improvement but also business process innovation. However. having an innovative nature, which is used for process innovation, BPMS implementation has great potential to stir up employee resistance. The analysis and the discussion about the prevention of the resistance against IS(Information Systems) is important because IS change the way people work and also alter the power structure within the organization, in general. The purpose of this study is to investigate factors that have an impact on the effective adoption of BPMS at the enterprise level. To find out these factors, this study considers two characteristics of BPMS: First. BPMS shares some characteristics with other enterprise-wide IS such as ERP. Second, it has special BPMS-specific characteristics. Due to the lack of previous research on BPMS adoption, interviews were carried out with IT-consultants and CIOs who conducted BPMS projects previously to find out BPMS-specific features that would make BPMS unique when compared to other enterprise-wide IS. As a result, the monitoring function was chosen as the main BPMS-specific factor. Thus, this paper reviewed studies both on enterprise-wide IS adoptions, which applied Technology Acceptance Model (TAM) and secondly on computer based monitoring to find out factors that would influence the employees' perception on the monitoring function of BPMS. Based on the literature review, the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses, out factors that would impact the employees' perception on the monitoring function of BPMS. Based on the literature review the study suggested three factors that would have an impact on the employee's perception of the monitoring function: fairness of enterprise evaluation system, fairness of the boss, and self-efficacy of their work. Three factors that would impact the enterprise-wide IS adoption were also set: the shared belief in the benefit of BPMS, training, and communication. Then, these factors were integrated with TAM. Structural equation modeling was used to test hypotheses. The data analysis results showed that two among three monitoring function related factors - enterprise evaluation system and fairness of the boss - were significant. This implies that employees would worry less about the BPMS implementation as long as they perceive the monitoring results will be used fairly for their performance evaluation. However, employees' high self-efficacy on their job was not a significant factor in their perception of the usefulness of BPMS. This is related to cases that showed employees resisted against the information systems because they automated their works (Markus, 1983). One specific case was an electronic company, where the accounting department workers were requested to redefine their job because their working processes were automated due to BPMS implementation.

Electro-Mechanical Modeling and Performance Analysis of Floating Wave Energy Converters Utilizing Yo-Yo Vibrating System (요요 진동시스템을 이용한 가동물체형 파력 발전 시스템의 기계-전기 통합해석 모델링 및 성능 해석)

  • Sim, Kyuho;Park, Jisu;Jang, Seon-Jun
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.39 no.1
    • /
    • pp.79-87
    • /
    • 2015
  • This paper proposes a floating-type wave energy conversion system that consists of a mechanical part (yo-yo vibrating system, motion rectifying system, and power transmission system) and electrical part (power generation system). The yo-yo vibrating system, which converts translational input to rotational motion, is modeled as a single degree-of-freedom system. It can amplify the wave input via the resonance phenomenon and enhance the energy conversion efficiency. The electromechanical model is established from impedance matching of the mechanical part to the electrical system. The performance was analyzed at various wave frequencies and damping ratios for a wave input acceleration of 0.14 g. The maximum output occurred at the resonance frequency and optimal load resistance, where the power conversion efficiency and electrical output power reached 48% and 290 W, respectively. Utilizing the resonance phenomenon was found to greatly enhance the performance of the wave energy converter, and there exists a maximum power point at the optimum load resistance.

Mechanical Modeling of Pen Drop Test for Protection of Ultra-Thin Glass Layer (초박형 유리층 보호를 위한 펜 낙하 시험의 기계적 모델링)

  • Oh, Eun Sung;Oh, Seung Jin;Lee, Sun-Woo;Jeon, Seung-Min;Kim, Taek-Soo
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.29 no.3
    • /
    • pp.49-53
    • /
    • 2022
  • Ultra-thin glass (UTG) has been widely used in foldable display as a cover window for the protection of display and has a great potential for rollable display and various flexible electronics. The foldable display is under impact loading by bending and touch pen and exposed to other external impact loads such as drop while people are using it. These external impact loads can cause cracks or fracture to UTG because it is very thin under 100 ㎛ as well as brittle. Cracking and fracture lead to severe reliability problems for foldable smartphone. Thus, this study constructs finite element analysis (FEA) model for the pen drop test which can measure the impact resistance of UTG and conducts mechanical modeling to improve the reliability of UTG under impact loading. When a protective layer is placed to an upper layer or lower layer of UTG layer, stress mechanism which is applied to the UTG layer by pen drop is analyzed and an optimized structure is suggested for reliability improvement of UTG layer. Furthermore, maximum principal stress values applied at the UTG layer are analyzed according to pen drop height to obtain maximum pen drop height based on the strength of UTG.

An Analysis about of Path Coefficient Difference of Intention to Use between Smart Education Experience Group and Non-Experience Group (스마트 교육 경험 집단과 비 경험 집단 간 활용 의도 경로계수 차이 분석)

  • Kim, Sang-Yon
    • Journal of The Korean Association of Information Education
    • /
    • v.16 no.4
    • /
    • pp.383-395
    • /
    • 2012
  • This study investigated the recognition of teachers on the introduction and use of SMART education, which is an ICT-based customized learning method. Through the investigation, the study was to empirically examine the relationship between the use intention of SMART education and its influential factors, and analyze the difference in the use intention of SMART education by teachers, focusing on the experience of SMART education. For analysis purpose, a structural equation model, which was expanded from the theory of reasoned action, was presented. In addition, the difference in path coefficient, which affects the use intention of SMART education, was compared based on the experience with or without SMART education. The results showed that teacher efficacy in the teacher group without SMART education experience was more negatively significant in class burden. In the teacher group with SMART education experience, it was found that the attitude toward SMART education was more significant in use intention; organizational citizenship behavior was more significant in use intention; teacher efficacy was more significant in the attitude toward SMART education and; teacher efficacy was more significant in organizational citizenship behavior. No significant difference was found in the path coefficient among the groups in other hypotheses. Through these results, the factors for introducing and promoting SMART education and its invigoration measures were presented.

  • PDF

The Study on Stakeholder' Concerns Regarding Consulting for Gifted Education Institutes (영재교육기관 컨설팅에 대한 영재교육 이해관계자의 관심도 연구)

  • Lee, Mi-Soon;Son, Sung Kuk
    • Journal of Gifted/Talented Education
    • /
    • v.26 no.2
    • /
    • pp.235-255
    • /
    • 2016
  • This study examined whether there were differences in stakeholders' concerns regarding consulting in gifted education institutes. A total of 122 stakeholders in gifted and talented education responded to SoCQ(the Stage of Concerns Questionnaire, Hall & Hord, 2011). The SoCQ responses of these stakeholders to consulting for gifted education institutes were converted into relative intensities and SoCQ profiles, which were analyzed by the affiliated areas of institute, teaching years in gifted education, continuities of affairs in gifted education, and approaches to teacher training for gifted education with using t-test and one-way analysis of variance. Results indicated that stakeholders generally showed the highest concern for stage 1(information) and the lowest concerns for stage 4(consequence), which were the initial stage of change and innovation in consulting for gifted education institutes. In the meanwhile, skakeholders having training program for professionals showed the more concern for stage 6(refocusing), which was a kind of resistance for the present consulting for gifted education institutes. On the based on these results, this study suggested ways(or methods) for settlement and the diffusion of successful gifted education consulting.

An Empirical Study on the Determinants of Supply Chain Management Systems Success from Vendor's Perspective (참여자관점에서 공급사슬관리 시스템의 성공에 영향을 미치는 요인에 관한 실증연구)

  • Kang, Sung-Bae;Moon, Tae-Soo;Chung, Yoon
    • Asia pacific journal of information systems
    • /
    • v.20 no.3
    • /
    • pp.139-166
    • /
    • 2010
  • The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.