• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.239-242
• /
• 1996

A model following control system(MFCS) can give general output signals following desired ones. In previous studies, a method of nonlinear MFCS was proposed by S.Okubo[1]. In this paper, the method of nonlinear MFCS will be extended to discrete time nonlinear systems. It is easy to extend the method to discrete time systems. But in the case .gamma.=1 discrete time systems, the proof becomes difficult, because the transfer function from f(v(k)) to v(k) can't be a positive real function. In this case, to ensure that internal states are stable, a new criterion is proposed.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.373-376
• /
• 1986

This paper proposes a robust model following control system which realizes good properties such as asymptotic stability, disturbance rejection and model following with reduced sensitivity for plant parameter variation. This algorithm can be easily applied to the multivariable control systems and the control structure is simple. As an example the aircraft control system of a convair C-131B is designed and its characteristics are examined by simulation.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.158-167
• /
• 1994

The design concept of varaiable structure control is useful not only to stochasic systems but also to adaptive control systems. The Dynamic equation of vertical three linkage robot was derived. And it was simplyfied according to the scheme of control strategy. And we specify the form of model. Thereafter the error dynamic equation was derived between the real state of the plant and state of the model. Some simulations were performed to control robot manipulator applying the methodology of the variable structure model following adaptive control.

• 대한전기학회논문지
• /
• 제34권10호
• /
• pp.407-417
• /
• 1985

This paper describes a new method for the design of adaptive model-following control systems. This design concept is developed using the theory of slide mode. Authors present new results on the sliding control methodology to achieve accurate tracking for a class of multi-input multi-output, time-varying systems in the presence of parameter variations and disturbances. This algorithm can be easily applied to the multivariable control systems and obtained a smoother control signal in comparison to variable structure model following control systems. The design technique is easy and the control structure is simple. The design requires little computational effort. The control system is less sensitive to plant parameter variations and noise disturbances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1934-1938
• /
• 1991

This paper proposes a robust model following control systems with nonlinear time varying plant. which realies good properties such as asymptotic stability, disturbance rejection and model-following with reduced sensitivity for plant parameter variation. The schemes do not incorporate any parameter identification algorithms, but the adaptation is realized through signal synthesis in a fixed parameter structure.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.372-375
• /
• 1996

In this paper, a designing method of model following control system for linear descriptor system with disturbances is proposed. The features of this method are:1) both the physical structure of the system and the physical system variables properties can be preserved because there is no necessary to make transformation of this system. 2) boundedness of internal states are proved by means of coprime factorization of descriptor system.

• 제어로봇시스템학회논문지
• /
• 제8권11호
• /
• pp.922-927
• /
• 2002

A variable structure control (VSC) based model following control system that possesses fault detection and isolation (FDI) capability as well as fault tolerance property is proposed. The nonlinear part of the proposed control law. whose magnitude is determined by sliding variables, plays the role of suppressing fault effect. Thus, approximate fault reconstruction is also possible via the analysis of sliding variables. The proposed algorithm is applied to an active suspension system of pound vehicles to verify its applicability.

• 제어로봇시스템학회논문지
• /
• 제9권2호
• /
• pp.99-106
• /
• 2003

A new reconfigurable model following flight control method based on direct adaptive scheme is presented. Using the timescale separation principle, both the inner-loop and the outer-loop states are controlled simultaneously. For the timescale separation assumption to be satisfied, the inner-loop model dynamics is set to be fast whereas the outer-loop model dynamics is set to be relatively slow. The stability and convergence of the proposed control law is proved by Lyapunov theorem. One of the merits of the proposed reconfigurable controller is that the FDI process and the persistent input excitation are not necessary, which is suitable for the flight control system. To evaluate the reconfiguration performance of the proposed control method, numerical simulation is performed using six degree-of-freedom nonlinear dynamics.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.123-128
• /
• 1998

This paper proposes design of LFT-based fuzzy controllers for model-following, which are better than the previous input-output linearization controllers, which are not able to follow the model system states and which do not guarantee the stability of all states. The method proposed in this paper provides a LFT-based Takagi-Sugeno(T-S) fuzzy controller with guaranteed stability and model-following via the following steps: First, using LFT(Linear Fractional Transformation) and T-S fuzzy model, controllers, are obtained. Next, error dynamics are obtained for model-following, and errors go to 0(zero). Finally, a T-s fuzzy controller that can stabilizxe the system with the requirement on the control input satisfied is obtained by solving the LMIs with the MATLAB LMI Control Toolbox and a model-following controller is obtained. Simulations are performed for the LFT-based T-S fuzzy controller designed by the proposed method, which show better performance than the results of input-out ut linearization controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.931-936
• /
• 1993

Optimal model following control scheme is to design the controller which makes the response of real system follow that of desirable model. This kind of design scheme is developed for first order system. We extends the scheme for second order system regarding the characteristics of mechanical second order system for vibration suppression of flexible structures. The model of mechanical second order system is obtained using suitable damping ratios and natural frequencies. Using this scheme, we can design the good controller which uses the characteristic of second order system. Numerical examples are presented which were used optimal model following control scheme.