• Korean Business Review
• /
• v.14
• /
• pp.169-187
• /
• 2001

In the recent efficiency study became accomplished generally a listed company, the efficiency study of small manufacturing industry is deficient. The purpose of this study analysis efficiency of small manufacturing industry by using the DEA model. DEA model is non-financial approach method to measure relative efficiency by input factors and output. The panel data from 1996 to 1999 are used for the analysis. The relative mean-efficiency can be summarized as follows. The wholesale trade and commission trade manufacturing industry 68.99%, communication equipment manufacturing industry 60.58%, food products and beverages manufacturing industry 91.05%, motor vehicles, trailers and semitrailers manufacturing industry 85.80%, basic metals manufacturing industry 88.96%, pulp, paper and paper products manufacturing industry 96.53%, chemical and chemical products manufacturing industry appeared with 78.67%. The results is expected to provide the empirical evidence useful to enhancing the competitiveness of manufacturing industry in korea.

• Nuclear Engineering and Technology
• /
• v.52 no.10
• /
• pp.2230-2237
• /
• 2020

Self-priming venturi scrubber is one of the most effective devices used to collect aerosols and soluble gas pollutants from gaseous stream during severe accident in a nuclear power plant. The present study focuses on investigation of dust particle removal efficiency of the venturi scrubber both experimentally and theoretically. Venturi scrubber captures the dust particles in tiny water droplets flowing into it. Inertial impaction is the main mechanism of particles collection in venturi scrubber. The water injected into venturi throat is in the form of jets through multiple holes present at venturi throat. In this study, aerosols removal efficiency of self-priming venturi scrubber was experimentally measured for different operating conditions. Alumina (Al₂O₃) particles with 0.4-㎛ diameter and 3950 kg/㎥ density were treated as aerosols. Removal efficiency was calculated for different gas flow rates i.e. 3-6 ㎥/h and liquid flow rates i.e. 0.009-0.025 ㎥/h. Experimental results depict that aerosols removal efficiency increases with the increase in throat velocity and liquid head. While at lower air flow rate of 3 ㎥/h, removal efficiency decreases with the increase in liquid head. A theoretical model of venturi scrubber was also employed and experimental results were compared with mathematical model. Experimental results are found to be in good agreement with theoretical results.

• International Area Studies Review
• /
• v.14 no.3
• /
• pp.205-219
• /
• 2010

In general, industrial production involves large amounts of harmful by-product, causing serious pollution and ecological risk. Eco-efficiency, which indicates how efficient the economic activity is by considering both the environmental risks and economic performance, is a new concept for economic sustainability analysis and quantitative ecological risk analysis. Data envelopment analysis (DEA) has been widely used to examine eco-efficiency in recent years. Whereas traditional DEA models such as CCR and BCC model neglect undesirable outputs, this paper adopts a stochastic undesirable-output DEA model to measure the eco-efficiency of each province of China and Korea. The results indicate that whereas the eco-efficiency of the eastern region was the highest, that of the western region was the lowest. The reason may come from the negative external dis-economies of environment. And thus the governmental efforts for outreach on the underdeveloped regions should be promoted.

• Journal of Korean Society on Water Environment
• /
• v.39 no.6
• /
• pp.465-474
• /
• 2023

The chemical composition and molecular weight characteristics of dissolved organic matter (DOM) exert a profound influence on the efficiency of organic matter removal in water treatment systems, acting as efficiency predictive indicators. This research evaluated the primary chemical and molecular weight properties of DOM derived from diverse sources, including rivers, lakes, and biomasses, and assessed their relationship with the efficiency of coagulation/flocculation treatments. Dissolved organic carbon (DOC) removal efficiency through coagulation/flocculation exhibited significant correlations with DOM's hydrophobic distribution, the ratio of humic-like to protein-like fluorescence, and the molecular weight associated with humic substances (HS). These findings suggest that the DOC removal rate in coagulation/flocculation processes is enhanced by a higher presence of HS in DOM, an increased influence of externally sourced DOM, and more presence of high molecular weight compounds. The results of this study further posit that the efficacy of water treatment processes can be more accurately predicted when considering multiple DOM characteristics rather than relying on a singular trait. Based on major results from this study, a predictive model for DOC removal efficiency by coagulation/flocculation was formulated as: 24.3 - 7.83 × (fluorescence index) + 0.089 × (hydrophilic distribution) + 0.102 × (HS molecular weight). This proposed model, coupled with supplementary monitoring of influent organic matter, has the potential to enhance the design and predictive accuracy for coagulation/flocculation treatments targeting DOC removal in future applications.

• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.6
• /
• pp.375-382
• /
• 2023

The binary oxide adsorbent using Fe and Mn (Fe-Mn) has been prepared by precipitation method to enhance the removal of phosphate. Different amounts of chitosan, a natural organic polymer, were used during preparation of Fe-Mn as a stabilizer to protect an aggregation of Fe-Mn particles. The optimal amount of chitosan has been determined considering the separation of the Fe-Mn particles by gravity from solution and highest removal efficiency of phosphate (Fe-Mn10). The application of Fe-Mn10 increased removal efficiency at least 15% compared to bare Fe-Mn. According to the Langmuir isotherm model, the maximum uptake (q_m) and affinity coefficient (b) were calculated to be 184 and 240 mg/g, and 4.28 and 7.30 L/mg for Fe-Mn and Fe-Mn10, respectively, indicating 30% and 70% increase. The effect of pH showed that the removal efficiency of phosphate was decrease with increase of pH regardless of type of adsorbent. The enhanced removal efficiency for Fe-Mn10 was maintained in entire range of pH. In the kinetics, both adsorbents obtained 70% removal efficiency within 5 min and 90% removal efficiency was achieved at 1 h. Pseudo second order (PSO) kinetic model showed higher correlation of determination (R²), suggesting chemisorption was the primary phosphate adsorption for both Fe-Mn and Fe-Mn10.

• Journal of Korea Port Economic Association
• /
• v.32 no.1
• /
• pp.29-58
• /
• 2016

The purpose of this paper is to show the clustering trend and the comparison of empirical results and is to choose the clustering ports for 3 Korean ports(Busan, Incheon and Gwangyang Ports) by using the bootstrapped DEA(Data Envelopment Analysis) and game Cross-efficiency models for 38 Asian ports during the period 2003-2013 with 4 input variables(birth length, depth, total area, and number of cranes) and 1 output variable(container TEU). The main empirical results of this paper are as follows. First, bootstrapped DEA efficiency of SW and LT is 0.7660, 0.7341 respectively. Clustering results of the bootstrapped DEA analysis show that 3 Korean ports [ Busan (6.46%), Incheon (3.92%), and Gwangyang (2.78%)] can increase the efficiency in the SW model, but the LT model shows clustering values of -1.86%, -0.124%, and 2.11% for Busan, Gwangyang, and Incheon respectively. Second, the game cross-efficiency model suggests that Korean ports should be clustered with Hong Kong, Shanghi, Guangzhou, Ningbo, Port Klang, Singapore, Kaosiung, Keelong, and Bangkok ports. This clustering enhances the efficiency of Gwangyang by 0.131%, and decreases that of Busan by-1.08%, and that of Incheon by -0.009%. Third, the efficiency ranking comparison between the two models using the Wilcoxon Signed-rank Test was matched with the average level of SW (72.83 %) and LT (68.91%). The policy implication of this paper is that Korean port policy planners should introduce the bootstrapped DEA, and game cross-efficiency models when clustering is needed among Asian ports for enhancing the efficiency of inputs and outputs. Also, the results of SWOT(Strength, Weakness, Opportunity, and Threat) analysis among the clustering ports should be considered.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.42-48
• /
• 2004

The deterministic modeling techniques like Zone model and Field model are mainly used for thermal distribution and smoke flow at fire case in multi use facilities. While Zone model analyse fire simulation by dividing spaces by 2 section, the Field model dividing many cells. However, the difficultly follows to prove efficiency between the two models when it applys. Therefore new modeling development is required which in closes to real situation by verify number algorithm and related data for fire modeling. The paper analyses the efficiency of two different fire modeling at interior spaces of multiplex cinema theater. It is found that the zone model for average distribution and the field model for detail space phenomenon are relevant to apply. Also, Filed model is useful to the result that fire analysis and position of detector and review for smoke control system.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.52
• /
• pp.97-118
• /
• 2011

85% of South Korea's gross domestic product(GDP) depends on trade. Exports amount in 2011 exceeds $ 5,000Billion. Korea is expected to achieve $ 1 trillion in total trade volume and will become finally the ninth in the world. We do not have a lot of natural resources and are bound to export the finished products to pursue economic development. In other words, trade sector is very essential for Korea to continue economic growth. The department of trade in universities have brought up the concerned students serving for trade sectors. Currently, "half-price tuition" in universities has become very controversial issue in Korea so this paper studies the efficiency of "the Department" because the universities may reconsider the adjustment of tuition fee, if they can enhance the efficiency level. DEA model is used for the analysis. As a result, 8 DMUs like KAN1, KEI5, BAE10 etc. show relatively higher efficiency levels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.6
• /
• pp.1539-1544
• /
• 1995

Copper blow test to measure the forging capability of 35 ton counterblow hammer and upset of plasticine on the model hammer to investigate the change of the blow efficiency during the forging process have been performed together with finite element analyses of these experiments. The blow efficiency of the hammer has been found to be dependent on the friction and on the contact area between the die and the workpiece. The effects of the volume and the aspect ratio of the billet have not been found. Inferring from the experimental results and Schey's empirical formula on the forging load, we expect that the efficiency also varies with the flow stress of the workpiece material and with the shape complexity of the forging product.

• Ocean and Polar Research
• /
• v.30 no.4
• /
• pp.445-451
• /
• 2008

This paper examines measures of technical efficiency in off-shore fishery based on a frontier production function model of the Cobb-Douglas type. Technical efficiency ranges between 57.13 and 98.62 percent. The results suggest that the highest TE in the industry is the trawl. Also, this analysis shows that Busan's Danish seine fishery has a maximum TE. Angling in Gangwon has a minimum TE. Empirical measures of technical efficiency in this study can be useful in analyzing the potential effects of policies designed to deal with the current fishery industry.