• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.69-93
• /
• 2008

Rising healthcare cost is a global phenomenon that justifies governments' introduction of 'incentive regulation' plan for the improvement of hospital efficiency. A number of previous studies tried to evaluate the efficiency of healthcare organization by using Data Envelopment Analysis(DEA), a common efficiency benchmarking method. However, there is a concern that this kind of efficiency evaluation could induce "quantity-quality trade-off". Moreover, as quality aspect is especially important in terms of 'effectiveness' of health care, it should be considered in efficiency evaluation of healthcare organization. A number of different models were tried so far to incorporate quality aspect into DEA, however, none is universally recognized as a standard. Thus, in this study, previous quality-incorporating DEA models were categorized into 6 types according to the way of incorporating quality aspect, and strengths and limitations of each type were reviewed with a set of artificial data as an example. Based on this review, a new quality-incorporating efficiency evaluation model, named Quality-adjusted output DEA(QAO-DEA), was suggested. As an exploratory empirical analysis, technical efficiency of human resource were measured with different quality-incorporating DEA models, using 2004 data from National University Hospitals. In conclusion, Quality-adjusted output DEA(QAO-DEA) model seems to be one of the most desirable alternatives to incorporate quality aspect in efficiency evaluation of hospital, and deserves the consideration as a policy tool to induce simultaneous improvement of both efficiency and quality.

• Journal of Korea Water Resources Association
• /
• v.52 no.spc2
• /
• pp.855-863
• /
• 2019

The efficiency of fishway installed in rivers can be directly evaluated by means of fish monitoring. On the other hand, when it is difficult to monitor the fish in certain conditions, or when planning a fishway, the efficiency can be evaluated indirectly through the hydraulic analysis. In this study, the hydraulic analysis technique for evaluating the efficiency of a fishway was presented. The River-2D model with the fish physical habitat module was used for the analysis of the attraction efficiency, and the weighted usable area was proposed as an index of the efficiency. In the analysis of passage efficiency, the three-dimensional model, Flow-3D, was used as an evaluation tool to describe the fluid behavior on a hydraulic structure with free surface. The ice-harbor type fishway at Baekgok weir in the Deokcheon River was selected as a test-site, and the efficiency was estimated using the hydraulic analysis. And then it was compared with fish monitoring data acquired from the river. As a result, it is difficult to replace the hydraulic analysis results with the efficiency quantitatively, but it can help to grasp the general tendency.

• Industry Promotion Research
• /
• v.8 no.4
• /
• pp.257-266
• /
• 2023

The research focuses on the provincial universities in the western region of China and investigates the research level of 12 provincial universities from 2017 to 2021, considering both static efficiency and dynamic efficiency. The static efficiency is examined using Data Envelopment Analysis (DEA), while the dynamic efficiency is analyzed using the Malmquist model. The analysis results are as follows: the scientific research efficiency of universities in the 12 western provinces is generally not high. Against the background of the "Double First-Class" construction, the overall efficiency of scientific research in universities is showing an increasing trend. The main reason for the increase in scientific research efficiency is the increase in scale efficiency in recent years. The total factor productivity (TFP) of research activities is influenced by the technology progress index and exhibits a pattern of initial increase, followed by a decline, and then an increase again. Research conclusion: Western colleges and universities should reasonably allocate resources for scientific research activities, perfect scientific research mechanisms, improve management standards, promote scientific innovation and corresponding achievements, and ultimately raise the scientific and technological level in western China.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.5
• /
• pp.834-840
• /
• 2001

A real time multibody vehicle dynamics model has been developed and implemented using a subsystem synthesis method based on recursive formulation. To verify real time simulation capability the developed model has been applied to HMMWV(High Mobility Multipurpose Wheeled Vehicle) with steering system. For the kinematically driven steering system, the coupled front suspension-steering subsystem can be decoupled into two SLA suspension subsystems, which improves the efficiency of simulation. To investigate theoretical efficiency, operational counting method has been also employed to compare the proposed model with the conventional recursive dynamics model. Various simulations such as unsymmetric bump run, step steering(J-turn) and sine steering input test have been carried out to verify the real time feasibility of the proposed model.

• IE interfaces
• /
• v.19 no.4
• /
• pp.291-299
• /
• 2006

In order to enhance sustainable war fighting capabilities, it is important to maintain a good ammunition support system. In this paper, we evaluate the performance of ammunition companies using Imprecise Data Envelopment Analysis (IDEA)-BCC and IDEA-Additive model, which can deal with imprecise data in DEA. The input variables of IDEA models were selected by stepwise multiple regression analysis. With the regression model, we could choose the number of soldiers, officers, and ammunition warehouses as input variables that have significant effects on the output performance. Then, we applied the IDEA-BCC model with the concept of potential efficiency. The results of the model indicate that 8 out of 16 ammunition companies are efficient, 7 are inefficient, and 1 is potentially efficient. We could also identify the possible input excesses and output shortfalls to reach the efficient frontier using the IDEA-Additive model.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.457-458
• /
• 2007

We investigated a resistor network model for the horizontal AlInGaN LED. Adding the proposed current density dependent relative quantum efficiency, the power simulation can be also obtained. Comparing the simulation and the measurement results for the LED with the size of $350{\mu}m$, the model is reasonable to simulate the forward voltage and the light output power. Using this model we investigated the optimization of the position and the number of the finger electrodes in a given chip area. It shows that the center disposition of the p-finger electrode in p-area is optimal for the voltage and best for the power. And the minimum number of the n-finger electrodes is best for the power.

• Journal of Ocean Engineering and Technology
• /
• v.31 no.3
• /
• pp.183-188
• /
• 2017

This paper provides numerical results for the estimation of the efficiency of KRISO energy saving devices in the design stage. A finite volume method is used to solve Reynolds averaged Navier-Stokes (RANS) equations, where the SST k-$\omega$ model is selected for turbulence closure. The propeller rotating motion is determined using a rigid body motion (RBM) scheme, which is called a sliding mesh technique. The numerical analysis focuses on predicting the power reduction by the designed KRISO devices (K-DUCT) under a self-propulsion condition. The present numerical results show good agreement with the available experimental data. Finally, it is concluded that CFD can be a useful method, along with model tests, for assessing the performance of energy saving devices for propulsion efficiency improvement.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.428-433
• /
• 2001

This paper presents the control algorithm for maximum efficiency drives of an induction motor system with the high dynamic performance. This system uses a simple model of the induction motor that includes equations of iron losses. The model, which only requires the parameters of induction motor, is referred to a field-oriented frame. The minimum point of the input power can be obtained at the steady state condition. The reference torque and flux currents for the vector control of induction motors are calculated by the optimal efficiency control algorithm. The drive system with the proposed efficiency optimization controller has been implemented by a 32 bit floating point TMS320C32 DSP chip. The results show the effectiveness of the control strategy proposed for the induction motor drive.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.53-59
• /
• 2001

The Primary Production of phytoplanktons produces organic matter in high concentration in eutrophicated Hakata Bay, Japan, even during the winter season in spite of low water temperature. Phytoplanktons are considered to have any biological capabilities to keep activities of photosynthesis under the unfavorable conditions, and this affects water quality of the bay. In this study, seasonal variations in primary production efficiency were predicted by using a simple box-type ecosystem model, which introduced the concept of efficiency for absorption of solar radiation energy in relation to growth of phytoplanktons under the low solar radiation intensity. According to the simulation result of primary production, it was organic pollution comes from dissolved organic carbon (DOC) throughout the year, DOC of which is originated from the primary production of phytoplanktons on biological response of the seasonal variation of ambient conditions.

• Knowledge Management Research
• /
• v.3 no.2
• /
• pp.31-48
• /
• 2002

Recent trend of business is characterized by a recognition of importance of knowledge asset. Especially, this phenomenon is receiving more momentum as our society goes digital rapidly. However, most of literature on knowledge management is based on knowledge circulation from the corporate point of view, not from individual viewpoint. In this regard, this paper is concerned with proposing knowledge circulation process and its efficiency from the individual perspective. We adopted structural equation model or SEM to prove the statistical validity of our research framework. Eight hypotheses were built and tested empirically, leading to the fact that the knowledge utilization and sharing of individuals have a positive impact on the knowledge management efficiency.