• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제29권3호
• /
• pp.87-95
• /
• 2006

In this paper, an approach for analyzing brand loyalty and brand switching behavior in car insurance market is presented. A two-choice model by Blumen, et al. that uses Markov chain is adopted as a main technique for estimating brand parameters. Survey data have been collected through personal interviews with questionnaires. Following the application of the model to the data, it is found that there are five leading companies in car insurance market where the number of potential brand switchers is larger than that of brand loyal customers. Therefore, differentiation of this product along with the conversion of this low-involvement product to a high-involvement one could make car insurance stand out against a somewhat undifferentiated field of competitors.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.171-172
• /
• 2013

An operation planning of lift car is crucial in tall building construction especially it's arrangement plans, because it is related with transportation distance of finishing materials affecting construction productivity. Since tall building construction, composed of complicating and huge plane have complex traffic lines of finishing materials, to determine the position of lift car empirically or intuitively has limits. Therefore this paper suggest an optimum layout model of lift car minimizing the transportation distance both at site-level and floor-level using Graph theory and Dijkstra algorithm.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.447-453
• /
• 2009

The interior noise of the High Speed Train(HST) is analyzed by applying the statistical energy analysis (SEA) method. The interior of each vehicle is divided lengthwise into nine cavities. Since the rolling noise and aerodynamics noise are expected to be dominant noise sources, they are treated as the noise sources in the model. To further simplify the model, curtains and seats are excluded. The simulation runs involving one-car, three-car and five-car trains are conducted. The maximum predicted noise level is 98.4dB. The results also show that the predicted noise levels are within 0.23% of each other. The results imply that it is not necessary to estimate the interior noise of the train by constructing multiple-car train models. The noise estimate based on just one-car train can be optimal with respect to the computational effort and modeling time.

• Proceedings of the KSR Conference
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.910-917
• /
• 2011

CBTC(Communication Based Train Control) car-borne equipment, a part of the communication based train control system, mainly consists of automatic train protection(ATP) functions, automatic train operation(ATO) functions as well as the interface functions with other equipment including CBTC wayside equipment and train control management system etc. The CBTC car-borne software implementing ATP/ATO functions is a real-time embedded software requiring a high level of safety and reliability. To satisfy the requirements of the CBTC car-borne software, the model-based design techniques are applied with SCADE(Safety-Critical Application Development Environment) to the development of the CBTC car-borne software. In this paper, we illustrate the process modeling the car-borne ATP/ATO functions satisfying system requirement specification with system requirement management, modeling and document generation tools etc. supported by SCADE. In addition, the developed models corresponding to the ATP/ATO functions are applied to the train with CBTC car-borne equipment through its corresponding EN-50128 standards-compliant C code generated by the code generator. It is shown from the test result that the ATP/ATO models developed by SCADE work well while the trains are running in driverless operation mode.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제29권5호
• /
• pp.65-70
• /
• 2015

Lightning is one of hazards affecting the rapid-transit railway system. There are two effects, which are direct lightning surge to electric car line and induced lightning surge. Protection methods for the direct lightning surge are studied with various occasions, however, study of induced lightning surge is insufficient in spite of a large or small effects. In this paper, it is analysed the way that serge voltage is induced to electric car line by lightning strikes. By modeling the propagation process and the coupling phenomenon of electromagnetic wave produced by lightning strikes, it is achieved to make integrative circuit model combined with existing electric car model. The study is conducted into three different waveform of electromagnetic wave produced by lightning; rectangular wave, double exponential distribution wave, triangle wave. It is also simulated that the inducing serge is coupled to electric car line in an arbitrary location. The simulation results in that, when rapidly changing rectangular wave is supplied, maximum power is induced to electric car line.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제12권6호
• /
• pp.22-28
• /
• 2013

This study aims to propose the location selection method of car-sharing services in Daejeon Metropolitan city. In order to select locations for car-sharing, Daejoen area was divided in $500m{\times}500m$ cell size using GIS Arc/Info 10, and input factors which may affect car-sharing service were determined, and then each input factor was standardized for analysis. The weight for each input factor was determined through experts' survey and index of goodness of fit was estimated in each cell ($500m{\times}500m$ size) using AHP method. Also, This study proposed the method to select 30 service facility location using Location-allocation Model in Network Analysis module. The proposed method for the location selection of car-sharing service in this study can be used for preliminary data for initial car-sharing introduction. Henceforward, appropriate demand forecasting and economic evaluation for the location selection of car-sharing service are needed for the further study.

• Archives of design research
• /
• 제13권2호
• /
• pp.15-24
• /
• 2000

The demands of golf car is being increased with increment in golf population, gradually proceeding to the trend of popularization, but domestic golf car industry is not so mature as it cope with the need of this market appropriately. Most import golf cars of high price have occupied the domestic market from the viewpoint of the its demands. Although the import golf car provided bad after-sales services and very expensive components, those demand's breadth continue to rise steadily. We decide to have to approach an appropriate time to develop the competitive model native to korean style in the field of golf car, since we have established our foundation in auto industry. At this point we try to analyze the golf car expected from a competition and the present state of golf car industry inside and outside of the country through this study. We attempt to derive the precondition for design development of a proper model to possess competitive power in foreign market from now on.

• Journal of the Korean Society for Precision Engineering
• /
• 제15권4호
• /
• pp.15-26
• /
• 1998

Full car model is needed for investigating as a entire dynamics of vehicle. In this study, 7DOF of full car model's dynamics is selected. This paper proposes the output feedback controller based on optimal control theory. Input data and output data from the optimal controller are used for neural network system identification of the suspension system. To do system identification, neural network which has robustness against nonlinearities and disturbances is adapted. This study uses back-propagation algorithm to train a multil-layer neural network. After obtaining a neural network model of a suspension system, a neuro-controller is designed. Neuro-controller controls suspension system with off-line learning method and multistep ahead prediction model based on the neural network model and a neuro-controller. The optimal controller and the neuro-controller are designed and then, both performances are compared through. For simulation, sinusoidal and rectangular virtual bumps are selected.

• Journal of the Korea Convergence Society
• /
• 제12권1호
• /
• pp.199-204
• /
• 2021

In this study, the configurations of the two engine exhaust manifolds were designed. And the strengths and durabilities were analyzed through the structural analysis and natural frequency analyses of these models. As the result of structural analysis, the strength of model A is much better than that of model B because the maximum stress and deformation of model B are considerably greater than those of model A by more than 9 and 39 times, respectively. It can also be confirmed that model A has the durability better than model B because the maximum frequency of model A is greater than the natural frequency of model B and its maximum deformation is smaller than model B. The result of this study can be used to investigate the durability due to the exhaust manifold shape of medium-sized car without actual test. It also seems to be helpful in the aesthetic convergent design of small car muffler.

• The Korean Journal of Applied Statistics
• /
• 제29권5호
• /
• pp.835-847
• /
• 2016

To analyze lattice or areal data, a conditionally autoregressive (CAR) model has been widely used in the eld of spatial analysis. The spatial neighborhoods within CAR model are generally formed using only inter-distance or boundaries between regions. Kyung and Ghosh (2010) proposed a new class of models to accommodate spatial variations that may depend on directions. The proposed model, a directional conditionally autoregressive (DCAR) model, generalized the usual CAR model by accounting for spatial anisotropy. Properties of maximum likelihood estimators of a Gaussian DCAR are discussed. The method is illustrated using a data set of median property prices across Greater Glasgow, Scotland, in 2008.