• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.546-555
• /
• 2014

The final aim of this study is to develop a biofiltration system integrated with plant vegetation for improving indoor air quality effectively depending on indoor space and characteristics. However, to approach this final goal, several requirements such as constant pressure drops (PDs) and soil moisture contents (SMCs), which influence the capacity design for a proper ventilation rate of biofiltration system, should be satisfied. Thus, this fundamental experiment was carried out to adjust a proper wind speed and to ensure a stabilization of initial SMCs within biofilter for uniform distribution of SMCs and PDs, and for normal plant growth, especially avoiding root stress by wind. Therefore, we designed horizontal biofliter models and manufactured them, and then calculated the ventilation rate, air residence time, and air-liquid ration based on the biofilter depending on three levels of wind speed (1, 2, and $3cm{\cdot}s^{-1}$). The relative humidity (RH) and PD of the humidified air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of lettuce and duffy fern grown within biofilter were measured depending on the three levels of wind speed. As a result of wind speed test, $3{\cdot}sec^{-1}$ was suitable to keep up a proper RH, SMC, and plant growth. Thus, the next experiment was set up to be two levels of initial SMCs (low and high initial SMC, 18.5 and 28.7%) within each biofilter operated and a non-biofiltered control (initial SMC, 29.7%) on the same wind speed ($3cm{\cdot}sec^{-1}$), and measured on the RH and PD of the air coming out through the soil within the biofilter, and SMC of the soil and plant growth parameters of Humata tyermani grown within biofilter. This result was similar to the first results on RHs, SMCs, and PDs keeping up with constant levels, and three SMCs did not show any significant difference on plant growth parameters. However, two biofiltered SMCs enhanced dry weights of the plants slightly than non-biofiltered SMC. Thus, the stability of this biofiler system keeping up major physical factors (SMC and PD) deserved to be adopted for designing an advanced integrated biofilter model in the near future.

• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.99-104
• /
• 2014

The objective of this study is to analyze the production of extra-large egg and assess the impacts of exogenous factors in feeding the layer chicken. The main results of this study are as follows; First, feeding rations on the basics of statistics, internal maximum and minimum temperature and, the age at first egg affect the production of extra-large egg. Second, implicating the standardized coefficients from the conclusion of regression model estimating suggest that the amount of feed has the greatest impact on production followed by the age at first egg. Third, by using the elasticity of output and the volatility in the production, the result suggest that among the independent variable factors in the external volatility, the biggest one goes to feed ration, and the age at first egg follows. In order to control the production volatility in the extra-large egg production of the farms, it is necessary to manage an efficient feeding based on feed ration, age at first egg and, the maximum and minimum temperature inside the farm. Taken together, the results demonstrates that it should be concentrated by controlling the exogenous factors affecting extra large egg production and the management system construct, to increase extra-large egg production and the income of farmers at the same time.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.17-25
• /
• 2013

The thermotolerant methylotrophic yeast Hansenula polymorpha is an attractive model organism for various fundamental studies, such as the genetic control of enzymes involved in methanol metabolism, peroxisome biogenesis, nitrate assimilation, and resistance to heavy metals and oxidative stresses. In addition, H. polymorpha has been highlighted as a promising recombinant protein expression host, especially due to the availability of strong and tightly regulatable promoters. In this study, we investigated the possibility of employing human serum albumin (HSA) as the fusion tag for the secretory expression of heterologous proteins in H. polymorpha. A set of four expression cassettes, which contained the methanol oxidase (MOX) promoter, translational HSA fusion tag, and the terminator of MOX, were constructed. The expression cassettes were also designed to contain sequences for accessory elements including His8-tag, $2{\times}(Gly_4Ser_1)$ linkers, tobacco etch virus protease recognition sites (Tev), multi-cloning sites, and strep-tags. To determine the effects of the size of the HSA fusion tag on the secretory expression of the target protein, each cassette contained the HSA gene fragment truncated at a specific position based on its domain structure. By using the Green fluorescence protein gene as the reporter, the properties of each expression cassette were compared in various conditions. Our results suggest that the translational HSA fusion tag is an efficient tool for the secretory expression of recombinant proteins in H. polymorpha.

• Toxicological Research
• /
• v.33 no.2
• /
• pp.107-118
• /
• 2017

Although alternative test methods based on the 3Rs (Replacement, Reduction, Refinement) are being developed to replace animal testing in reproductive and developmental toxicology, they are still in an early stage. Consequently, we aimed to develop alternative test methods in male animals using mouse spermatogonial stem cells (mSSCs). Here, we modified the OECD TG 489 and optimized the in vitro comet assay in our previous study. This study aimed to verify the validity of in vitro tests involving mSSCs by comparing their results with those of in vivo tests using C57BL/6 mice by gavage. We selected hydroxyurea (HU), which is known to chemically induce male reproductive toxicity. The 50% inhibitory concentration ($IC_{50}$) value of HU was 0.9 mM, as determined by the MTT assay. In the in vitro comet assay, % tail DNA and Olive tail moment (OTM) after HU administration increased significantly, compared to the control. Annexin V, PI staining and TUNEL assays showed that HU caused apoptosis in mSSCs. In order to compare in vitro tests with in vivo tests, the same substances were administered to male C57BL/6 mice. Reproductive toxicity was observed at 25, 50, 100, and 200 mg/kg/day as measured by clinical measures of reduction in sperm motility and testicular weight. The comet assay, DCFH-DA assay, H&E staining, and TUNEL assay were also performed. The results of the test with C57BL/6 mice were similar to those with mSSCs for HU treatment. Finally, linear regression analysis showed a strong positive correlation between results of in vitro tests and those of in vivo. In conclusion, the present study is the first to demonstrate the effect of HU-induced DNA damage, ROS formation, and apoptosis in mSSCs. Further, the results of the current study suggest that mSSCs could be a useful model to predict male reproductive toxicity.

• Journal of Radiation Protection and Research
• /
• v.33 no.1
• /
• pp.13-20
• /
• 2008

The flow rate measurements in a multi-phase flow pipeline were evaluated quantitatively by means of a clamp-on sealed radioisotope based on a cross correlation signal processing technique. The flow rates were calculated by a determination of the transit time between two sealed gamma sources by using a cross correlation function following FFT filtering, then corrected with vapor fraction in the pipeline which was measured by the ${\gamma}$-ray attenuation method. The pipeline model was manufactured by acrylic resin(ID. 8 cm, L=3.5 m, t=10 mm), and the multi-phase flow patterns were realized by an injection of compressed $N_2$ gas. Two sealed gamma sources of $^{137}Cs$ (E=0.662 MeV, ${\Gamma}$ $factor=0.326\;R{\cdot}h^{-1}{\cdot}m^2{\cdot}Ci^{-1}$) of 20 mCi and 17 mCi, and radiation detectors of $2"{\times}2"$ NaI(Tl) scintillation counter (Eberline, SP-3) were used for this study. Under the given conditions(the distance between two sources: 4D(D; inner diameter), N/S ratio: $0.12{\sim}0.15$, sampling time ${\Delta}t$: 4msec), the measured flow rates showed the maximum. relative error of 1.7 % when compared to the real ones through the vapor content corrections($6.1\;%{\sim}9.2\;%$). From a subsequent experiment, it was proven that the closer the distance between the two sealed sources is, the more precise the measured flow rates are. Provided additional studies related to the selection of radioisotopes their activity, and an optimization of the experimental geometry are carried out, it is anticipated that a radioisotope application for flow rate measurements can be used as an important tool for monitoring multi-phase facilities belonging to petrochemical and refinery industries and contributes economically in the light of maintenance and control of them.

• KDI Journal of Economic Policy
• /
• v.31 no.1
• /
• pp.105-138
• /
• 2009

Although the decline in fertility rate is generally observed along the history of economic development throughout the world, the continuing decline hitting below the replacement level in Korea over the recent years gathered serious social concerns on the ground that it accelerates the process of population aging. The total fertility rate in Koreareached 2.08 in 1983, and gradually fell to the levels of 1.08 in 2005 and 1.26 in 2007. The policy debate over the role of the government has been focused mainly on the level of theoretical discussion without substantial basis on firm empirical evidence and the determinants of fertility. The objective of the paper is to empirically investigate the fertility effect of the female wage, which is understood as one of the most important determinants of fertility in Koreasince 1980 focusing on one aspect of fertility, namely birth spacing. Using the Korean National Fertility Survey conducted in 2006, I estimate a duration model of first and second births taking into account individual heterogeneity, which turned out to be an important factor to control for. Compared with previous studies in the literature on the Korean fertility, the study has an advantage of using the complete pregnancy history of women in a more representative sample. Unlike the previous studies, the analysis also deals with the endogeneity of marriage by treating a certain age, rather than age at marriage, as the time in which a woman becomes exposed to the risk of pregnancy. The study shares the common problem in the literature on birth spacing of lacking relevant wage information for respondents in a retrospective survey. I estimate the wage series as a function of the basic characteristics using the annual Wage Structure Survey from 1980 to 2005, which is considered as a nationally representative sample for wage information of employees. The results suggest that the increase in female wage by 10 percent leads to a decrease in second birth hazard by 0.56~0.92 percentage points and that the increase in spouse's wage by the equal amount is accompanied by the increase in second birth hazard by 0.36~1.13 percentage points. These estimates are more precisely estimated and of smaller magnitude than those presented by the previous studies. The results are robust to the different specifications of the wage equation. The simulation analysis based on the predicted values shows that about 17% of the change in the second birth hazard over the period 1980 to 2005 was due to the change in the female wage. Although there is some limitation in data, the results can be viewed as one estimate of the role of female wage on the recent fertility decline in Korea. The question raised by the paper is not a normative one of whether a government should promote childbearing but a positive one thatexplains fertility decline. Therefore, if there is a wide consensus on promoting childbearing, the finding suggests that the policies designed to reduce the opportunity cost of women in the labor market would be effective. The recent movement of implementing a wide range of family-friendly policies including child care support, maternity leave, parental leave and tax benefit in developed countries should be understood in this context.

• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1219-1230
• /
• 2008

Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.

• Korean journal of communication and information
• /
• v.46
• /
• pp.511-555
• /
• 2009

Media-related regulations can be classified into two categories; regulations of individual media contents and regulations regarding the entry to and withdrawal from a certain field. In this dissertation, ownership regulations are regarded as legal and political measures so as to prevent the monopoly and oligopoly of public opinion, and to secure its diversity. Every country has its own regulation model according to its particular media environment. Korea too is obliged to actively respond to its environmental changes, at the same time vitalizing the media industry and protecting consumers' rights and interests. Strong political intentions to protect the public interest is necessary when it comes to media regulation policies, especially in the circumstances that public interest is an industrial priority. As the convergence of broadcasting and telecommunications is leading to a major shift in the media industry, the regulation of cross-media ownership is an issue involving potential conflicts among media-owners, non-governmental organizations and the authorities concerned, depending on their various viewpoints regarding the media industry. In this paper, an attempt was made to search necessity of redefining 'public interest', which is the logic behind the restriction of cross-media ownership, and to reconceptualize issues on the centralization and diversity of media. First, an examination of the actual conditions of newspaper companies was carried out in order to reinvestigate domestic cross-media ownership issues, which is represented by the cross-ownership issue of newspapers and broadcasting stations. Next, the dilemma of policies stimulated by the fusion of media was discussed based on cross-media ownership restrictions, and the need for efficient conflict control was suggested. Finally, proposals on the independency and public confidence of media-related policy-making authorities, the rationalization of regulation models, an itemized discussion on cross-media ownership regulation issues, the elaboration of measures for a balanced development among media were made. It could be found that a number of foreign countries were still facing challenges to prevent monopoly and oligopoly of the public opinion and the industry. A solution to settle disagreements about the dilemma of the media industry, including the cross-media ownership regulation issues, must be arranged on the grounds of 'mutual respect of public interest and industrial interest', In Korea, an ease on the ownership regulations adapting to the change in the media industry may be considered, however the softening of the cross-media ownership regulations must be approached with the utmost care. Paradoxically Relieving cross-media ownership regulations may be considered the foundation of a richer field of journalism, where there is no need for concern over the monopoly and oligopoly of public opinion.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.33-43
• /
• 2007

Because usually signal controllers on the crosswalks of mid-block provide pedestrian signals every cycle based on the fixed signal plan, pedestrian signals are provided even when there is no pedestrian demand. Consequently, signal is operated inefficiently and this may cause drivels to experience useless delay or violate the signal. Even though recently pushbuttons have been installed to improve the efficiency of pedestrian signal control in the crosswalks of mid-block and the pedestrian safety. they are not spread out national-wide in Korea because of the cost of the pushbutton equipments and the lack of an acknowledgement of the efficiency of the pushbutton. In this study, the effectiveness of the pushbutton on saving the vehicle delay was verified through before and after study in 4 study sites using a traffic micro-simulation model, VISSIM. To evaluate the viability of the pushbutton, a benefit/cost analysis was also performed for 4 study sites. It was found that B/C ratio of all of 4 study sites was greater than 1. The sensitivity analysis for the traffic volume and pedestrian volume were performed to identify the impact of the both volume on the operation of pushbutton. And, a benefit/cost analysis was performed for all scenarios. It was found that when the pedestrian volume is greater than 90ped/h, the pedestrian signal was operated same as the fixed signal plan. That is, there is no benefit of pushbutton at all once the pedestrian volume is greater than 90ped/h. When the pedestrian volume is equal to or less than 90ped/h and the traffic volume is greater than 2,500veh/h, B/C ratio is greater than 1. Also it was found that as traffic volume increases and pedestrian volume decreases, the benefit increases. In this study, the criteria for installation of pushbutton on the crosswalks of mid-block are developed through the sensitivity analysis and benefit/cost analysis. The results of this study may be used as a criteria for expansion of pushbutton system.