• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.503-508
• /
• 2003

This paper proposes modified subspace iteration method for efficient frequency analysis of structures. Proposed method uses accelerated Lanczos vectors as starting vectors in order to reduce the number of iterations in the subspace iteration method. Proposed method has better computing efficiency than the conventional method when the number of desired frequencies is relatively small. The efficiency of proposed method is verified through numerical examples.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.43-46
• /
• 2009

This paper deals with feeling recognition from people's voice to fine feature vectors. Voice signals include the people's own information and but also people's feelings and fatigues. So, many researches are being progressed to fine the feelings from people's voice. In this paper, We analysis Selectable Mode Vocoder(SMV) that is one of the standard 3GPP2 codecs of ETSI. From the analyzed result, we propose voices features for recognizing feelings. And then, feeling recognition algorithm based on gaussian mixture model(GMM) is proposed. It uses feature vectors is suggested. We verify the performance of this algorithm from changing the mixture component.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.638-642
• /
• 2005

This paper proposes a modified space-vector pulse width modulation (PWM) strategy which can restrict the common-mode voltage for three-phase to three-phase matrix converter and still keep sinusoidal input and output waveforms and unity power factor at the input side. The proposed control method has been developed based on contributing the appropriate space vectors instead of using zero space vectors. The advantages of this proposed method is to reduce the peak value of common-mode voltage to 42% beside the lower high harmonic components as compared to the conventional SVM method. Hence, the new table is also presented with the new space vector rearrangement. Furthermore, the voltage transfer ratio is unaffected by the proposed method. A simulation of the overall system has been carried out to validate the advantages of the proposed method.

• Journal of Information Processing Systems
• /
• v.20 no.1
• /
• pp.24-37
• /
• 2024

To address the requirement for high-speed encryption of large amounts of data, this study improves the widely adopted cipher block chaining (CBC) mode and proposes a controllable parallel cipher block chaining (CPCBC) block cipher mode of operation. The mode consists of two phases: extension and parallel encryption. In the extension phase, the degree of parallelism n is determined as needed. In the parallel encryption phase, n cipher blocks generated in the expansion phase are used as the initialization vectors to open n parallel encryption chains for parallel encryption. The security analysis demonstrates that CPCBC mode can enhance the resistance to byte-flipping attacks and padding oracle attacks if parallelism n is kept secret. Security has been improved when compared to the traditional CBC mode. Performance analysis reveals that this scheme has an almost linear acceleration ratio in the case of encrypting a large amount of data. Compared with the conventional CBC mode, the encryption speed is significantly faster.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.244-249
• /
• 1998

The present paper improves the direct identification scheme based upon the equation error formulation with incomplete modal data. First, an indirect estimation technique is considered for estimating unmeasured elements of latent vectors by the combined use of a model and measured incomplete eigen vectors. It is used for estimating the other elements of eigen vectors, which are essential for identification but not available. Next an index is introduced here to indicate the quality of estimation with respect to the mode and the measured positions. A sensitivity formula for eigenvalues with respect to the unknown joint coefficient is also derived to select the modes appropriate for identification. An identification strategy is suggested to meet with practical problems with the help of the index and sensitivity formula. The index and the sensitivity are proved to be useful for selecting measurement positions and modes appropriate for identification A comprehensive simulation study is performed to test the proposed method.

• Steel and Composite Structures
• /
• v.2 no.3
• /
• pp.223-236
• /
• 2002

An analytical procedure based on the transfer matrix method to estimate not only the natural frequencies but also vibration mode shapes of the thin-walled members composed of interconnected cylindrical shell panels is presented. The transfer matrix is derived from the differential equations for the cylindrical shell panels. The point matrix relating the state vectors between consecutive shell panels are used to allow the transfer procedures over the cross section of the members. As a result, the interactions between the shell panels of the cross sections of the members can be considered. Although the transfer matrix method is naturally a solution procedure for the one-dimensional problems, this method is well applied to thin-walled members by introducing the trigonometric series into the governing equations of the problem. The natural frequencies and vibration mode shapes of the thin-walled members composed of number of interconnected cylindrical shell panels are observed in this analysis. In addition, the effects of the number of shell panels on the natural frequencies and vibration mode shapes are also examined.

• Journal of KSNVE
• /
• v.6 no.1
• /
• pp.97-106
• /
• 1996

This paper presents systematic study of the experimental application of a free-interfaced component mode synthesis method. In the free-interfaced component mode synthesis method, an error the to truncated higher modes and neglected ineria loadings on a component from the connected component is inherent. Also, it is difficult to directly use experimental modal data in a modal synthesis method which links experimental model to finite-element model because of many inconsistencies between experimentally obtained and analytically obtained modal vectors and missing degrees-of-freedom (DOFs) such as rotational DOFs. In order to solve these problems, three methods, the first one based on attaching auxiliary weights to the connection points, the second one utillizing the normalization of experimental modal vector, and the third one generating smoothed and expanded experimental mode shapes, are studied in this paper. Finally, the study is illustrated for a flat-plate structure by using simulated and measured experimental data.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.123-136
• /
• 2015

The present study numerically investigates the effect of shield on the flow characteristics of Hartmann whistle. The flow characteristics of un-shielded Hartmann whistle are compared with whistles of different shield heights 15 mm, 17 mm, 20 mm, 25 mm and 30 mm. The comparison of Mach number contours and transient velocity vectors of shielded Hartmann whistles with un-shielded ones for the same conditions reveal that the presence of shield causes the exiting jet to stick to the wall of the shield without causing spill-over around the cavity inlet, thus sustaining the shock oscillation as seen in the unshielded Hartmann whistle, which has intense flow/shock oscillation and spill-over around the cavity mouth. The velocity vectors indicate jet regurgitance in shielded whistles showing inflow and outflow phases like un-shielded ones with different regurgitant phases. The sinusoidal variation of mass flow rate at the cavity inlet in un-shielded Hartmann whistle indicates jet regurgitance as the primary operating mode with large flow diversion around the cavity mouth whereas the non-sinusoidal behavior in shielded ones represent that the jet regurgitance is not the dominant operating mode. Thus, this paper sufficiently demonstrates the effect of shield in modifying the flow/shock oscillations in the vicinity of the cavity mouth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8C
• /
• pp.764-771
• /
• 2009

In this paper, we propose a fast multiple reference frame selection method using neighboring motion vectors and the correlation of inter-mode blocks in H.264 video coding. Using the property that an optimal reference frame has the statistical characteristics, the motion estimation of small Inter-block size is estimated from the motion estimation of the larger Inter-block size. Simulation results show that the proposal method decreased the computations about 91%. Without the sacrifice of coding performance, comparing to the H.264 multiple reference picture coding.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.23 no.5
• /
• pp.336-344
• /
• 2018

This study proposes a new PWM method for leakage current reduction and neutral point (NP) current control in three-phase three-level converter employed in bipolar DC distribution systems. The proposed PWM method uses medium vectors only when there is no need to control the NP current. Thus, common mode voltages are held constant to realize zero leakage current. Some space vectors that produce low-frequency common mode voltages are employed to minimize leakage currents when the average NP current needs to be a positive or negative value. The proposed space vector PWM is implemented based on barycentric coordinate. The validity of the proposed PWM method is verified by simulations and experiments.