• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.67-75
• /
• 2011

The development of electric vehicle power electronics system control, composed of DC-AC inverters and DC-DC converters, attract much research interest in the modern industry. A DC-AC inverter supplies the high-power motor torques of the propulsion system and utility loads of electric vehicles, whereas a DC-DC converter supplies the conventional low-power and low-voltage loads. However, the need for high-power bidirectional DC-DC converters in future electric vehicles has led to the development of many new topologies of DC-DC converters. The nonlinear control of power converters is an active research area in the field of power electronics. This paper focuses on the use of the fuzzy sliding mode strategy as a control strategy for buck-boost DC-DC converter power supplies in electric vehicles. The proposed fuzzy controller specifies changes in control signals based on the surface and knowledge on surface changes to satisfy the sliding mode stability and attraction conditions. The performance of the proposed fuzzy sliding controller is compared to that of the classical sliding mode controller. The satisfactory simulation results show the efficiency of the proposed control law, which reduces the chattering phenomenon. Moreover, the obtained results prove the robustness of the proposed control law against variations in load resistance and input voltage in the studied converter.

• 융합신호처리학회논문지
• /
• 제6권3호
• /
• pp.134-142
• /
• 2005

전류모드 CMOS 회로기반 다치 논리 회로가 최근에 구현되고 있다. 본 논문에서는 4-치 Unary 다치 논리 함수를 전류모드 CMOS 논리 회로를 사용하여 합성하였다. 전류모드 CMOS(CMCL)회로의 덧셈은 각 전류 값들이 회로비용 없이 수행될 수 있고 또한 부의 논리 값은 전류흐름을 반대로 함으로써 쉽게 구현이 가능 하다. 이러한 CMCL 회로 설계과정은 논리적으로 조합된 기본 소자들을 사용하였다. 제안된 알고리듬을 적용한 결과 트랜지스터의 숫자를 고려하는 기존의 기법보다 더욱 적은 비용으로 구현할 수 있었다. 또한 비용-테이블 기법의 대안으로써 Unary 함수에 대해서 범용 UUPC(Universal Unary Programmable Circuit) 소자를 제안하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.44-44
• /
• 2003

Growth mechanism of carbon nanotubes(CNTs) synthesized by chemical vapor deposition is abided by two growth modes. These growth modes are classified by the position of activated catalytic metal particle in the CNTs. Growth mode can be also affected by interaction between substrate and catalytic metal and induced energy such as thermal and plasma. We studied the reaction of catalytic metal to the substrate and growth mode of CNTs. Various substrates such as Si(100), graphite plate, coming glass, sapphire and AAO membrane are used to study the relation between catalytic metal and substrate in the synthesis of CNTs. For catalytic metal, thin film was deposited on various substrate via sputtering technique with a thickness of ∼20nm and magnetic fluids with none-sized particles were dispersed on AAO membrane. After laying process on AAO membrane, it was dried at 80$^{\circ}C$ for 8 hour. Synthesizing of CNTs was carried out at 900$^{\circ}C$ in NH3/C2H2 mixture gases flow for 10minutes.

• 인터넷정보학회논문지
• /
• 제25권1호
• /
• pp.29-37
• /
• 2024

본 논문에서는 환자와 같은 특정 객체의 움직임을 감지하고 추적하기 위한 효율적인 영상처리 시스템을 제안한다. 이진화된 차 영상에서 객체의 윤곽선추출을 위하여 기존 알고리즘대비 대비 정밀한 감지가 가능하고 혼성모드설계에 용이한 세선화 알고리즘을 적용하여 영역을 추출한다. 연산량이 많은 이진화와 세선화 단계를 RTL(Register Transfer Level) 기반으로 설계하여 논리회로 합성을 거쳐 최적화된 하드웨어 블록으로 대체된다. 설계된 이진화 및 세선화 블록은 표준 180n CMOS 라이브러리를 이용하여 논리회로로 합성한 후 시뮬레이션을 통하여 동작을 검증하였다. 소프트웨어기반의 성능비교를 위해 32bit FPGA 임베디드시스템 환경에서 640 × 360 해상도의 샘플 영상을 적용하여 이진 및 세선화 연산에 대한 성능분석도 실시하였다. 검증결과 혼성모드 설계가 이전의 소프트웨어로만 이루어지는 처리속도에서 이진 및 세선화 단계에서 93.8% 향상될 수 있음을 확인하였다. 제안된 객체인식을 위한 혼성모드 시스템은 인공지능 네트워크가 적용되지 않는 엣지 컴퓨팅 환경에서도 환자의 움직임을 효율적으로 감시할 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.344.2-344.2
• /
• 2016

Fully and partially grown hexagonal boron nitride (h-BN) on Cu foil, synthesized by chemical vapor deposition method, was studied using Raman and SEM measurements. Fully and partially grown samples were successfully made from borane-ammonia complex to controlling pressure and growth time. The fully grown h-BN and partially grown h-BN exhibits a ~ 1370 cm-1 B-N vibrational mode (E2g). Especially, well-aligned triangular h-BN monolayer was observed on some domain of Cu foil using SEM measurements.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.97-103
• /
• 2000

Gas pulsation discharged from the cylinder causes noise in the rotary compressor. Mufflers are usually used to reduce the noise generated by the gas pulsation. The muffler has been designed to maximize the acoustic transmission loss of the muffler. The gas which went through muffler is discharged to the cavity in compressor. Thus, the acoustic characteristics of cavity should be taken into account in muffler design. In this paper, the program for the acoustic substructure synthesis method is developed. This program can be interfaced with SYSNOISE which is commercial acoustic package. Several types of mufflers designed to have the better acoustic performance are suggested in this work and compared with the existing commerical muffler in the compressor. The acoustic performance of mufflers taking into consideration of the cavity in the compressor is also carried out by the developed program.

• International Journal of Advanced Culture Technology
• /
• 제4권4호
• /
• pp.30-37
• /
• 2016

In this paper, the method of controlling the clock that is inputted on the hardware from the application, and the hardware design method are to be proposed. When the hardware is synthesized to the Field Programmable Gate Array(FPGA), the input clock is fixed, and when the input clock is changed, the synthesis process must be passed again to require more time. To solve this problem, the Mixed-Mode Clock Manager(MMCM) module is mounted to control the MMCM module from the application. The controlled MMCM module controls the input clock of the module. The experiment was process the Neural Network algorithm in the x86 CPU and SIMT based processor mounted the FPGA. The results of the experiment, SIMT-based processors, the time that is processed at a frequency of 50MHz was 77ms, 100MHz was 34ms. There was no additional synthesis time due to a change of the clock frequency.

• 전자공학회논문지D
• /
• 제35D권4호
• /
• pp.18-23
• /
• 1998

Approximations inherent in the Cohn synthesis theory, which is generally perferree as a convinient design technique for direct-couple waveguide filter, results in considerable devications from the required responses as the design bandwidth increases. In this paper, two main deviations likely to occur in practice are examined using the mode-matching technique. They are a shift in couoff frquencies and large return loss occuring near coutoff frequencyles. Using the power loss ratio, the first effect is corrected to the resulant filter structure from cohn synthesis. In order to show the validity of the intorduced approackes. Ka-band waveguide filter ahs been designed and manufactored. The experimental curve follow the expected curves after corrections fairly closly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1993년도 춘계학술대회논문집; 한국과학연구소, 21 May 1993
• /
• pp.52-56
• /
• 1993

An efficient method is presented for determining transient responses of locally nonlinear structures using substructure eigenproperties and Lagrange multiplier technique. The method is based upon the mode synthesis formulation procedure, but does not construct the equations of motion of the combined whole structure compared with the conventional methods. For modal bases of each linear substructure, either fixed or free interface modes can be employed. The transient analysis is based upon the recurrence discrete-time state equations and offers the simplicity of the Euler integration method without requiring small time increment and iterative solution procedure. Numerical examples reveal that the method is very accurate and efficient in calculating transient responses compared with the direct numerical integration method.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.60-70
• /
• 1997

Since, human error is a major factor contributing to disaster during start-up of operation in Boiler plant. it is necessary to develop an automation system which prevent mode of operation that are known to be dangerous and to bring a loss of energy. The aim of this study is to suggest a model for the computer-aided synthesis of operation sequence as a part of automation system for start-up operation. Synthesis is accomplished by the formation of a hierarchical network of goals which decide sequence of operations. Hierarchical Network is formed by using method which upper goals ( i.e. upper operation al situation) are classified by the function of themselves into lower goals (i.e. lower operational situation). Knowledge for deciding operation sequence is generated by putting In order the knowledge of hazard operation and energy management.