• Transactions of the Korean hydrogen and new energy society
• /
• v.12 no.3
• /
• pp.231-238
• /
• 2001

Electrocatalytic activity of palladium for hydrogen oxidation and reduction was studied using AC impedance method. The system under study was arranged in electrolytic mode consisting of Pd electrode under study, Pt counter electrode and Nafion electrolyte between them. Two types of Pd electrodes were used - carbon-supported Pd (Pd/C) and Pd foil electrode. Pd/C anode contacting pure hydrogen showed a steady decrease of charge transfer resistance with the increase of anodic overpotential, which is an opposite trend to that found with Pd foil anode. But Pd foil cathode also exhibited a decrease of the resistance with the increase of cathodic overpotential. The relationship between imposition of overpotential and subsequent change of the charge transfer resistance is determined by the ratio of the rate of faradaic process to the rate of mass transportation; if mass transfer limitation holds, increase of overpotential accompanies the increase of charge transfer resistance. Regardless of the physical type of Pd electrode, the anode contacting hydrogen/oxygen gas mixture did not reveal any independent arc originated from local anodic oxygen reduction.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.685-688
• /
• 2011

본 논문에서는 다양한 음향 가진에 따른 음향 응답을 유한 요소법을 통하여 효과적으로 계산하기 위한 새로운 모델 축소법을 제안한다. 일반적인 유한 요소법을 통한 기계구조물의 응답을 구하기 위해서는 음향 방정식의 강성 및 행렬을 구한 뒤 이들의 조합을 통한 동적 강성행렬을 구한 뒤 역행렬을 구하여 다양한 주파수 응답을 구하게 된다. 현재 컴퓨터 하드웨어의 발전과 소프트 웨어의 발전에 의하여 더 많은 유한 요소를 사용할 수 있게 되었고 이로 인하여 더욱 정확하고 넓은 대역의 음향 응답을 구할 수 있게 되었다. 그러나, 아직까지도 아주 복잡한 구조물의 음향 응답을 구하기 위하여 유한 요소를 무한정으로 증가할 수 없는 경우가 많다. 이를 해결하기 위하여 일반적으로 모델 축소법(Model order reduction) 기법을 사용한다. 이 모델 축소법은 기본적으로 전체 행렬을 아주 작지만 효율적인 작은 행렬로 바꾸어 응답을 예측하는 기법으로 mode superposition method, ritz vector method, quasi-static ritz vector method등이 있다. 기존의 모델 축소법은 기본적으로 질량 및 강성행렬이 가진 주파수에 영향을 받지 않는 행렬이라 가정한다. 그렇기 때문에 경계조건이나 다공성 재료를 모델링할 경우 가진 주파수에 영향을 받는 강성행렬과 질량행렬이 만들어지게 되어 기존의 모델 축소법은 효과적이지 못하게 된다. 이런 문제점을 해결하기 위하여 이 논문에서는 Quasi-static ritz vector method의 기본적인 개념을 확장하여 여러 개의 중심 주파수(Center frequency)에서 기저를 계산하고 이를 동시에 이용하는 Multi-frequency quasi-static ritz vector method를 제안한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.146-150
• /
• 2017

In OFDM system, the out-of-band radiation of ensemble interferes with the adjacent ensemble and result in the reduction of receiving performance. So the reduction scheme of out-of-band radiation is very important. In this paper, a time-domain windowing method to reduce the out-of-band radiation is considered to DAB systems. We adopt the considered method to T-DMB(DAB mode-1) and AT-DMB Systems, and we get about 3-dB gains of out-of-band radiation. And also we show that the considered method doesn't reduce the BER performance.

• Journal of Environmental Health Sciences
• /
• v.33 no.1 s.94
• /
• pp.36-42
• /
• 2007

Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. In the Heavy Duty Diesel area, the Continuously Regeneration trap has been widely applied in the retrofit market. As the Special act for the improvement of air quality in the capital area, the retrofit program for DPF to used diesel vehicle has progressed favorably and there are currently over 1,000 of these DPF in use in retrofit applications in korea. These DPF comprise a specially formulated Diesel Oxidation Catalyst upstream of a DPF. The $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to evaluate exactly the DPF devices according to the regulation of DPF certificate test procedure for retrofit(ministry of environment(MOE) announcement NO. 2005-16). To do so the understand of that regulation like the standard of PM reduction rate is needed. In this study the test procedure including test cycle and BPT test condition was examined and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and seoul-10 mode test, no defect could be showed.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1229-1239
• /
• 2014

Optimal Distributed Generation (DG) output and reconfiguration are among the well accepted approach to reduce power loss in a distribution network. In the past, most of the researchers employed optimal DG output and reconfiguration separately. In this work, a simultaneous DG output and reconfiguration analysis is proposed to maximize power loss reduction. The impact of the separated analysis and simultaneous analysis are investigated. The test result on the 33 bus distribution network with 3 units of DG operated in PV mode showed the simultaneous analysis gave the lowest power loss (global optimal) and faster results compared to other combined methods. All the analyses for optimizing the DG as well as reconfiguration are used the Artificial Bee Colony Optimization technique.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.6
• /
• pp.635-642
• /
• 2000

In this paper, we proposed an efficient document conversion mechanism to provide a adaptive web document to mobile terminals. We also proposed a RHTML(Reduced HTML) to archive the adaptive tag reduction. Markup error correction process in the proposed adaptive document conversion mechanism converts a HTML(HyperText Markup Language) document into a XML(Extensible Markup Language) application document. This. process makes web document easy to handle with a DOM (Document Object Mode)) as the tree model and removes the hardware overhead in mobile terminals. Also, tag reduction process provides the adaptive web document with three DTD(Document Type Definition)s in the RHTML.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.43-48
• /
• 2005

Conventional non-destructive techniques for inspection of the weld in pipelines require significant test time and high cost. Ultrasonic guided waves have been widely studied and successfully applied to various non-destructive tests with advantage of the long-range inspection. In this paper, a study on the application of ultrasonic guided waves to the long-range inspection of the pipeline is presented using a long-range guided wave inspection system, Wavemaker SE16, GUL. The characteristics and setup of the long-range guided wave inspection system and experimental results in pipes of with various diameter are introduced. The experimental results in mock-up pipes with cluster type detects show that the minimum detectable wall thickness reduction with this guided wave system is $2\~3\%$ in the pipe cross section area. And the wall thickness reduction of $5\%$ in cross section area can be detected when actual detection level is used. Therefore, the applicability of the guided wave systeme to long-range inspection of wall thickness reduction in pipes is verified.

• Journal of Drive and Control
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2021

There is an increasing interest in condition-based maintenance for the prevention of economic loss due to failure. Moreover, immense research is being carried out in related technologies in the field of construction machinery. In particular, data-based failure diagnosis methods that employ AI (machine & deep learning) algorithms are in the spotlight. In this study, we have focused on the failure diagnosis and mode classification of reduction gear of excavator's travel device by using the AI algorithm. In addition, a remote monitoring system has been developed that can monitor the status of the reduction gear by using the developed diagnosis algorithm. The failure diagnosis algorithm was performed in the process of data acquisition of normal and abnormal under various operating conditions, data processing and analysis by the wavelet transformation, and learning. The developed algorithm was verified based on three-evaluation conditions. Finally, we have built a system that can check the status of the reduction gear of travel devices on the web using the Edge platform, which is embedded with the failure diagnosis algorithm and cloud.

• Tribology and Lubricants
• /
• v.40 no.1
• /
• pp.24-27
• /
• 2024

A monotype valve body for a dual clutch transmission has the potential to reduce costs, weight, and manufacturing time by modularizing various parts, including those of existing solenoid packs and valve bodies, into one through the application of super-precision die casting technology. However, this approach may lead to challenges such as reduced rigidity and increased interference due to modularization and compactness, impacting both product performance due to the reduced weight as well as durability and reliability. Unlike existing products, this approach requires a high-precision thin-wall block to avoid more complicated flow line formation, interference between flow lines, and leaks, as well as a strict quality requirement standard and precise inspections including detection of internal defects. To conduct precise inspections, we built an equivalent model corresponding to a driving distance of 300,000 km. Testing involved simulating actual road loads using a real vehicle and a chassis dynamometer in the FTP-75 mode (EPA Federal Test Procedure). The aim of the study was to establish a vehicle load-based part durability model for manufacturing a mono-type valve body and to develop fundamental technology for part weight reduction through preliminary design by introducing analytical weight reduction technology based on the derived results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.2
• /
• pp.164-170
• /
• 2002

Sliding mode control, as a typical method of variable structure control, has the robust characteristics for the uncertainty and the disturbance of the nonlinear system. Because, however, sliding mode control input includes a sign function that Is discontinuous on the predefined switching surface, its applications are primarily limited by the need of alleviation or reduction of chattering. In this paper, we propose a chattering alleviation strategy based on a special nonlinear function and a fuzzy system. By using the proposed control scheme, we can reduce the steady state error. Its tracking performance is as fast as that of conventional method using the fixed boundary layer. Especially, in the proposed method, we can adjust the trade-off between the steady state error and the degree of chattering by regulating the proper range of the output variable of the fuzzy system. To verify the validity of the proposed algorithm, the analysis of the control method using the fixed boundary layer and the computer simulations are shown to compare with them.