• 한국산업정보학회논문지
• /
• 제16권3호
• /
• pp.121-135
• /
• 2011

본 연구는 클라우드 컴퓨팅 서비스 투자 및 경제적 효과에 관련된 기술의 연구현황 및 사례들을 바탕으로 경제성 분석 모형을 제공한다. 플라우드 컴퓨팅 서비스가 기업에 가져올 수 있는 비용절감 만을 편익으로 계상함으로써 투자안들의 편익 및 비용을 보수적이며 효율적으로 파악할 수 있다. 기존 정보시스템을 대체할 논클라우드, 클라우드 방식의 투자안을 정태적인 NPV 분석방식 그리고 불확실성 및 전략적 옵션을 반영한 동태적인 실물옵션 분석 방식을 활용하여 비교하였다. 정태적인 NPV방식의 경제성 분석은 기업이 가진 전략적인 옵션의 가치를 제대로 평가하지 못하는 단점을 지적하고 있으며 실물옵션에 기반한 경제성 분석은 시장변수들과 기업이 전략적인 옵션이 클라우드 투자안들의 경제성에 미치는 영향을 함께 분석할 수 있다.

• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.569-585
• /
• 2016

This paper highlights a case study that investigates the behaviour of existing bridge, West Terrace Bridge, induced by horizontal seismic loading. Unfortunately the lack of past information related to seismic activity within the NSW region has made it difficult to understand better the capacity of the structure if Earthquake occurs. The research was conducted through the University of Western Sydney in conjunction with Railcorp Australia, as part of disaster reduction preparedness program. The focus of seismic analyses was on the assessment of stress behaviour, induced by cyclic horizontal/vertical displacements, within the concrete slab and steel truss of the bridge under various Earthquake Year Return Intervals (YRI) of 1-100, 1-200, 1-250, 1-500, 1-800, 1-1000, 1-1500, 1-2000 and 1-2500. Furthermore the stresses and displacements were rigorously analysed through a parametric study conducted using different boundary conditions. The numerical analysis of the concrete slab and steel truss were performed through the finite element software, ABAQUS. The field measurements and observation had been used to validate the results drawn from the finite element simulation. It was illustrated that under a YRI of 1/1000 the bottom chord of the steel truss failed as the stress induced surpassed the ultimate stress capacity and the horizontal displacement exceeded the allowable displacement measured in the field observations whereas the vertical displacement remained within the previously observed limitations. Furthermore the parametric studies in this paper demonstrate that a change in boundary conditions alleviated the stress distribution throughout the structure allowing it to withstand a greater load induced by the earthquake YRI but ultimately failed when the maximum earthquake loading was applied. Therefore it was recommended to provide a gap of 50mm on the end of the concrete slab to allow the structure to displace without increasing the stress in the structure. Finally, this study has proposed a design chart to showcase the failure mode of the bridge when subjected to seismic loading.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2004년도 추계학술발표회
• /
• pp.129-135
• /
• 2004

선체구조 부재에는 이중저의 거더 및 늑판등에서 유공을 가진 판이 많이 사용되고 있고, 이는 중량 경감, 사람 및 화물의 이동, 배관 등의 목적으로, 보통은 강도상 큰 문제가 없는 부위에 위치하지만, 때로는 불가피하게 높은 응력이 작용하는 부위에 설치해야 한 경우도 있다. 이러한 판에 유공의 존재는 면내 하중에 의한 탄성좌굴강도 및 최종강도에 큰 영향을 주게 된다. 따라서, 유공판의 탄성좌굴강도 및 최종강도 평가는 선박의 초기 구조설계단계에서 구조부재 치수를 결정할 때 검토해야 할 중요한 설계기준 중의 한가지 이다. 그러므로, 유공판에 대한 합리적인 신뢰적인 탄성좌굴강도 및 최종강도 설계식이 필요시 되고 있다. 본 연구에서는 다양한 종횡비와 유공의 치수비 그리고 세장비의 영향을 고려하여 탄소성대변형 유한요소법을 근간으로 한 해석코드인 ANSYS를 사용하여 수치계산을 수행하였다.

• 교육녹색환경연구
• /
• 제6권2호
• /
• pp.25-52
• /
• 2007

This paper is focused on the economical efficiency of the geothermal heat pump system in school. As the importance of problems of environment and energy becomes larger, the development and distribution of energy-saving technology in the whole nation has become influential. This paper is intended, targeting on school buildings scattered all over the country, to evaluate the introduction and possibility of a terrestrial heat system which is in the first stage of introduction in the country, through energy consumption and efficiency in case where a terrestrial heat system is introduced. To do that, the author performed a qualitative analysis of the heat pump system using various terrestrial heat energy and the system introduced to existing school buildings and, through the analysis, made tentative evaluation on the most environment-friendly and energy saving type system. Also, the author performed simulation analysis using a currently typical school building standard and, on the basis of this result, conducted efficiency analysis of various heat pump systems. The conclusion according to synthetical analysis & evaluation can be summarized as follows. In case a heat pump system is introduced to a school building, it was deemed the investment in the early stage would increase, but the investment could be collected within 5~6 years through reduction of large operation expenses. Also, it was analyzed in case of terrestrial heat contracted heat mode using midnight electric power among heat pump systems, not only early investment but also operation expenses could be reduced to a great extent. Accordingly in case the system using terrestrial heat energy is applied to the school buildings that are to be newly built or repaired in the future, it will provide an object-lesson to students as well as contributing to energy saving.

• 대한전자공학회논문지SD
• /
• 제46권12호
• /
• pp.30-35
• /
• 2009

본 논문에서는 3GPP (third generation partnership project) 릴리즈 7 고속 패킷 접속 에볼루션 규격에 포함된 기능 중 기지국 수용 능력 향상, 지연 시간 단축, 그리고 단말소비 전력 감소를 목적으로 새롭게 추가된 연속적인 패킷 연결 프로토콜의 유연한 설계 구조에 대한 것이다. 상기 프로토콜이 3GPP 고속 패킷 접속 규격 기준으로 새롭게 추가된 기능임에 착안하여, 기존 설계 및 검증된 고속 패킷 접속 플랫폼에서 최소한의 하드웨어 변경 및 추가만으로 상기 프로토콜이 구현되도록 고려하였다. 상기 제안된 연속적인 패킷 연결 프로토콜은 비연속적인 송/수신 모드 관련 신호 생성부와 기존 고속 패킷 접속 플랫폼과의 연동을 위한 인터페이스부로 구분된다. 마지막으로 제안된 연속적인 패킷 연결 프로토콜은 셀룰러 이동통신 분야에 적합하도록 규정화된 검증 단계에 따라 기존 고속 패킷 접속 FPGA 단말 모뎀 플랫폼 상에서 다양한 시나리오에 따라 검증되었다.

• Journal of Ginseng Research
• /
• 제34권2호
• /
• pp.77-88
• /
• 2010

Ginseng has been reported to reduce the risk of cancer in diverse organs, including the lip, oral cavity, pharynx, larynx, esophagus, lung, liver, pancreas, ovary, colon, rectum, and stomach, as demonstrated in clinical and epidemiological studies. studies, base on which findings, Panax ginseng has been classified as a "non-organ-specific cancer preventive." However, the recent keen interest in traditional medicinal herbs has been frequently questioned, about exact mode of action and the use of panaceic compounds has been a prime issue discussed in terms of complementary and alternative medicine. Several in vitro and in vivo studies have shown the mitigating effects of Korean red ginseng on Helicobacter pylori (H. pylori)-associated atrophic changes and carcinogenesis; However, evidence-based medicine, consisting of large-scale or well designed clinical studies, is still warranted whether Korean red ginseng is to be recognized as an essential therapeutic strategy regarding a "H. pylori-associated gastric cancer preventive." Specifically, comprehensive clinical trials of Korean red ginseng are needed to demonstrate that mucosal regeneration in patients with atrophic gastritis is feasible using Korean red ginseng supplements after the eradication of H. pylori infection. Ginseng is a good example of a natural herb and its ubiquitous properties may include the reduction or delay of inflammation carcinogenesis. Korean red ginseng contains ample amounts of active ginsenosides and we have demonstrated their effects in in vitro and in vivo studies with positive outcomes. In this review, the quantitative and qualitative benefits of Korean red ginseng in the treatment of H. pylori infection are described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.667-671
• /
• 2012

Low frequency noises (up to about 200 Hz) mainly occur due to particular modes, resulting in booming noises, and in general the solutions may be found based on mode controls where conventional methods such as FEM can be used. However, at higher frequencies between 0.3~ 1 kHz, as the number of modes rapidly increase, radiation characteristics from structures, performances of damping sheets and sound packages may be more crucial rather than particular modes, and consequently the conventional FEM may be less practical in dealing with this kinds of structure-borne problems. In this context, so-called 'mid-frequency simulation model' based on FE-SEA hybrid method is studied and validated. Energy Transmission loss (i.e. air borne noise) is also studied. A dash panel component is chosen for this study, which is an important path that transfers both structure-borne and air borne energies into the cavity. Design modifications including structural modifications, attachment of damping sheets and application of different sound packages are taken into account and the corresponding noise characteristics are experimentally identified. It is found that the dash member behaves as a noise path. The damping sheet or sound packages have similar influences on both sound radiation and transmission loss. The comparison between experiments and simulations shows that this model could be used to predict the tendency of noise improvement.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.44-49
• /
• 2014

The effect of weldbond hybrid joining process on the mechanical behavior of single lap and L-tensile joints was investigated for the newly developed 1.2GPa grade ultra high strength TRIP(transformation induced plasticity) steel. In the case of single lap shear behavior, the weldbond joint of 1.2GPa TRIP steel showed lower maximum tensile load and elongation than that of the adhesive bonding only. It was considered to be due to the reduction of real adhesion area, which was caused by the degradation of adhesive near the spot weld, and the brittle fracture behavior of the spot weld joint. In the case of L-tensile behavior, however, the maximum tensile load of the weldbond joint of 1.2GPa TRIP steel was dramatically increased and the fracture mode was change to the base metal fracture which is desirable for the spot weld joint. These synergic effect of the weldbond hybrid joining process in 1.2GPa TRIP steel was considered to be due to the stress dissipation around the spot weld joint by the presence of adhesive which resulted in the change of crack propagation path.

• 대한전자공학회논문지SD
• /
• 제45권5호
• /
• pp.33-39
• /
• 2008

레이저 다이오드의 비선형성으로 인해 발생하는 왜곡성분들을 제거하기 위해 피드포워드 선형화 기법을 적용한 광송신기를 제작하였다. 레이저 다이오드의 파장차이에 따른 광전송 실험을 위해 광 주입 기술을 피드포워드 기법에 적용하여 3차 상호변조 왜곡성분(IMD3)의 크기변화를 측정하였다. 광 전송길이 및 레이저 다이오드의 파장차이로 인해 생기는 위상 부정합 현상을 분석하고 이에 따른 IMD3의 크기변화를 시뮬레이션 및 측정 하였다. 그리고 IMD3의 억제량의 변화를 극복하기 위해 정량적인 위상 가변량을 계산하였으며, 시스템 설계시 고려해야 할 가이드라인을 제시한다.

• Journal of Electrochemical Science and Technology
• /
• 제9권3호
• /
• pp.202-211
• /
• 2018

In this work, Fe-Pd alloy films have been electrodeposited on different substrates using an electrolyte containing $[Pd(NH_3)_4]^{2+}$ (0.02 M) and $[Fe-Citrate]^{2+}$ (0.2 M). The influences of substrate and overpotential on chemical composition, nucleation and growth kinetics as well as the electrodeposited films morphology have been investigated using energy dispersive X-ray spectroscopy (EDS), current-time transients, scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction (XRD) patterns. In all substrates - brass, copper and sputtered fluorine doped tin oxide on glass (FTO/glass) - Fe content of the electrodeposited alloys increases by increasing the overpotential. Also the cathodic current efficiency is low due to high rate of $H_2$ co-reduction. Regarding the chronoamperometry current-time transients, it has been demonstrated that the nucleation mechanism is instantaneous with a typical three dimensional (3D) diffusion-controlled growth in the case of brass and copper substrates; while for FTO, the growth mode changes to 3D progressive. At a constant overpotential, the calculated number of active nucleation sites for metallic substrates is much higher than that of FTO/glass; however by increasing the overpotential, the number of active nucleation sites increases. The SEM micrographs as well as the XRD patterns reveal the formation of Fe-Pd alloy thin films with nanostructure arrangement and ultra-fine grains.