• The KIPS Transactions:PartC
• /
• v.15C no.3
• /
• pp.149-156
• /
• 2008

JPEG2000 is the upcoming image coding standard that provides better compression rate and image quality compared with JPEG. Lazy-mode steganography guarantees the safe communication under the two information loss stages in JPEG2000. However, it causes the severe changes of the code-block noise variance sequence after embedding and that is detectable under the steganalysis using the Hilbert-Huang transform (HHT) based sequential analysis. In this paper, a JPEG2000 lazy-mode steganography method is presented. The code blocks which produce the sudden variation of the noise variance after embedding are estimated by calculating low precision code-block variance (LPV) and low precision code-block noise variance (LPNV). By avoiding those code-blocks from embedding, our algorithm preserves the sequence and makes stego images secure under the HHT-based steganalytic detection. In addition, it prevents a severe degradation of image quality by using JPEG2000 quality layer information. On various 2048 images, experiments are performed to show the effective reduction of the noise variation after message embedding and the stable performance against HHT-based steganalysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.983-989
• /
• 2013

This study proposes a piezoelectric vibration energy harvester composed of two diagonally segmented energy harvesting units. An auxiliary structural unit is attached to the tip of a host structural unit cantilevered to a vibrating base, where the two components have beam axes in opposite directions from each other and matched short-circuit resonant frequencies. Contrary to the usual observations in two resonant frequency-matched structures, the proposed structure shows little eigenfrequency separation and yields a mode sequence change between the first two modes. These lead to maximum power generation around a specific frequency. By using commercial finite element software, it is shown that the magnitude of the output power from the proposed vibration energy harvester can be substantially improved in comparison with those from conventional cantilevered energy harvesters with the same footprint area and magnitude of a tip mass.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.79-86
• /
• 2001

This study shows an attempt to generate an assembly sequence and its model for a ship block assembly using the graph theory and graph algorithms. To generate the ship block assembly, we propose four levels of the ship block assembly model such as "geometry mode1", "relational model", "sequential mode1", and "hierarchical model". To obtain the relational model, we used surface and surface intersection algorithm. The sequential model that represents a possible assembly sequence is made by using several graph algorithms from the relational model. The hierarchical model will be constructed from the sequential model in order to represent the block assembly tree and so forth. The purpose of the hierarchical model is to define an assembly tree and to generate the Bill Of Material(BOM). Lastly, the validity of the method proposed in this study is examined with application to ship block assembly models of a single type and double type according to four models mentioned above.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.193-197
• /
• 2015

Recently, the new issues for the safety and the information delivery system in the ship are raised. The deployment and the efficient algorithms of deploying the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by reshaping some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-three way slave mode are designed and its measureed data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system with the three way algorithm for the deployment of the shipboard wireless networks can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.183-186
• /
• 2015

Recently, the demand for the safety and the information delivery system in the ship increases. The deployment of the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by deforming some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-two way slave mode are designed and its measurement data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system for the deployment of the shipboard wireless networks can be built.

• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.187-194
• /
• 2021

This paper presents a study of laser output characteristics. We fabricated a MOPA (master oscillator power amplifier)-type high-power, narrowbandwidth fiber laser with a bidirectional pumping configuration in its main amplifier. As signal beams, light sources with bandwidths of 3 GHz and 10 GHz-phase-modulated through a PRBS (pseudo-random binary sequence)-were used interchangeably. Furthermore, the characteristics of the SBS (stimulated Brillouin scattering) were analyzed using a signal beam with 3 GHz bandwidth, by adjusting the forward to backward pumppower ratio. Moreover, the characteristics of the transverse mode instability were analyzed by adjusting the forward to backward pump-power ratio, using a signal beam with 10-GHz bandwidth. Finally, the output power from 10 GHz bandwidth was amplified to more than 1 kW using a forward to backward pump-power ratio of 1.6. The beam quality M² was measured to be approximately 1.36, and the optical-to-optical efficiency was 80% at maximum output power.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.257-267
• /
• 2014

Distributed compressive video sensing (DCVS) is a low cost sampling paradigm for video coding based on the compressive sensing and the distributed video coding. In this paper, we propose using a skip-mode coding in DCVS under the assumption that in case of high temporal correlation, temporal interpolation can guarantee sufficiently good quality of nonkey frame, therefore no need to transmit measurement data in such a nonkey frame. Furthermore, we extend it to use a hierarchical structure for better temporal interpolation. Simulation results show that the proposed skip-mode coding can save the average subrate of whole video sequence while the PSNR is reduced only slightly. In addition, by using the proposed scheme, the computational complexity is also highly decreased at decoder on average by 43.75% for video sequences that have strong temporal correlation.

• Journal of Korea Multimedia Society
• /
• v.12 no.7
• /
• pp.922-928
• /
• 2009

In H.264 as the newest video standard, 9 modes are used in order to predict the signal values of a block composed with several pixels by intra prediction. From these process, H.264 can bring high compression ratio in the encoded signal but the use of total 9 modes can give the inefficiency of the increase of the complexity induced by the amount of operation processing or the number of searching which is applied to compare adjacent pixels. This paper proposes a simplification method of prediction mode for the intra-picture coding by considering subjective interest region. There are certain region being interested within a picture of the video sequence. This region requires better subjective picture quality than the other regions. The proposed method increases the simplification of prediction mode by providing just essential modes of total 9 modes for less interest regions compared with the interest region. It is possible to get the additional 11%$\sim$15% simplification of the prediction mode by the proposed method, compared with the conventional method which simplifies the prediction mode for all of the picture by using the prediction characteristics only.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.198-203
• /
• 2009

With the growing demand for multimedia services and advances in display technology, new applications for 3$\sim$D scene communication have emerged. While multi-view video of these emerging applications may provide users with more realistic scene experience, drastic increase in the bandwidth is a major problem to solve. In this paper, we propose a fast prediction mode decision algorithm which can significantly reduce complexity and time consumption of the encoding process. This is based on the object segmentation, which can effectively identify the fast moving foreground object. As the foreground object with fast motion is more likely to be encoded in the view directional prediction mode, we can properly limit the motion compensated coding for a case in point. As a result, time savings of the proposed algorithm was up to average 45% without much loss in the quality of the image sequence.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.6 s.165
• /
• pp.1026-1038
• /
• 1999

Interlaminar fracture toughness of carbon/epoxy composite materials has been studied under tensile and flexural loading by the use of width tapered double cantilever beam(WTDCB) and end notched flexure(ENF) specimens. This study has significantly examined the effect of various interfacial ply orientation, ${\alpha}(0^{\circ},\;45^{\circ}\;and\;90^{\circ})$ and crack propagation direction, ${\theta}(0^{\circ},\;15^{\circ},\;30^{\circ}\;and\;45^{\circ})$ in terms of critical strain energy release rate through experiments. Twelve differently layered laminates were investigated. The data reduction for evaluating the fracture energy is based on compliance method and beam theory. Beam theory is used to analyze the effect of crack propagation direction. The geometry and lay-up sequence of specimens are considered various conditions such as skewness parameter, beam volume, and so on. The results show that the fiber bridging occurred due to the non-midplane crack propagation and causes the difference of fracture energy evaluated by both methods. For safer and more reliable composite structures, we obtain the optimal stacking sequence from initial fracture energy in each mode.