• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.70-75
• /
• 2012

The technique with ultrasonic vibration refers to the many industries. Especially Ultrasonic Connection Method is widely used for mobile battery, secondary battery, automobile components and also they recently started using it for terminal connecting of solar community battery. In this study, ultrasonic welding horn is analysed and designed with FEM, then manufactured based on it. Resonance frequency and amplitude of horn would be measured and compared with the designing result to judge the suitability. Al/Al specimen is welded by the manufactured horn and verify its performance via the weldability evaluation.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.375-383
• /
• 2014

In Seoul, total 166 places of foot-bridges were constructed but a study on correlation between resonance occurrence status by gait vibration and natural frequency by each span and that between span based on structural system and natural frequency is very unsatisfactory in reality. Consequently in this study, time series wave form, power spectrum and natural frequency were analyzed based on resonance occurrence by targeting 65 places of foot-bridges being constructed in Seoul through convenient and simple portable vibration meter.

• The KIPS Transactions:PartC
• /
• v.19C no.3
• /
• pp.167-172
• /
• 2012

Mobile phone devices and memory card can be robbed and lost due to the carelessness that might be caused to leak personal information, and also company's confidential information can be disclosed. Therefore, the importance of user authentication to protect personal information is increasing exponentially. However, there are the limitations that criminals could easily obtain and abuse information about individuals, because the input method of personal identification number or the input method of password might not be safe for Shoulder Surfing Attack(SSA). Although various biometric identification methods were suggested to obstruct the SSA, it is the fact that they also have some faults due to the inconvenience to use in mobile environments. In this study, more complemented service for the user authentication was proposed by applying Keystroke method in the mobile environments to make up for the faults of existing biometric identification method. Lastly, the effectiveness and validity of this study were confirmed through experimental evaluations.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1246-1253
• /
• 2007

The recent issue of optical pickup actuators is to apply optical storage devices to mobile devices such as a cellular phone and PDA. It requires actuators to become smaller than conventional types. As the size becomes smaller, the magnetic force is reduced and the assembly of optical pickup actuators becomes more difficult. In addition, its dynamic characteristics are changed. In this paper, methods to improve magnetic forces and dynamic characteristics are suggested and the optimal result of the plate spring design is obtained. A diamond shape magnet and the fine pattern coil (FPC) are used to improve magnetic forces and damping elements are attached to decrease the peak magnitude of the mode instead of using structural damping, mostly for the purpose of improving the accuracy of the finite element simulation. To get more stable dynamic characteristics than conventional ones, a plate spring is applied to the optical pickup actuator and it is optimized with topology and parameter optimization to obtain the concept and the detail design, respectively.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.106-109
• /
• 2006

In this paper, the design and characteristics of a novel ultrasonic motor are investigated. Such a motor is appropriate far use in the optical zoom or auto focusing functions of the lens system in mobile phones. Its design and simulation of performances are carried out by FEM commercial software (ATILA). The shape of the motor is similar to a square without one side, on which an optical lens can be mounted. Two sheets of piezoelectric ceramics are adhered to both sides of two legs of the elastic body, respectively To drive the ultrasonic motor, the voltage is applied to two sheets of piezoelectric ceramics bonded to one leg. The rotation direction can be easily changed by switching the piezoelectric sheets bonded to the other leg, to which voltage is applied. A proto type of the motor is fabricated and its outer size is $10^*10^*2[mm3]$ including the camera lens of which the diameter is 7.5(mm). Its power consumption is about 0.3[W] and the speed of rotation is adjustable from 10 to 200[rpm] according to the applied voltage

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.164-167
• /
• 2005

In this paper, the design and characteristics of a ${\pi}-shaped$ ultrasonic motor which is applicable to optical zoom operation of lenssystem for mobile phone are investigated. Its desi후 and simulation of performances are carried out by FEM (finite element method) commercial software. As a simulation result, by applying voltage with single phase, a combined vibration is produced at the surface of an arm of stator. The prototype of motor is fabricated and its outer size is 8*4*2 $mm^3$ including the cylindrical steel rod of 2 mm in diameter as rotor. The motor exhibits a maximum speed of 500 rpm and a power consumption of 0.3 W when driven at 20 Vpp and 64 kHz.

• Transactions of the Society of Information Storage Systems
• /
• v.5 no.1
• /
• pp.8-13
• /
• 2009

In this study, to compensate trembling of camera caused by vibration of user's hand, 2-axis voice coil actuator of optical image stabilizer (OIS) is suggested. In consideration of actuating performance, volume of OIS and application of hall sensor, one of concept models is selected and it is optimized to maximize the actuating performance. Two types of mechanisms that have the feasibility of moving in 2-axis and the capability of including the optimized EM circuit are proposed. Finally both types are fabricated and then actuating performance of OIS actuator and behavior of hall sensor are verified through the experiment.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.6
• /
• pp.1045-1053
• /
• 2014

In this paper, we assume that the information leakage through side-channel signal may occur from the card payment terminal and newly introduce a real application attack model. The attack model is a side channel attack based on vibration signals, which are detected by a small sensor attached on card terminal by attacker. This study is similar to some other studies regarding side channel attack. However, this paper is different in that it is based on the non-language model. Because the financial transaction information such as a card number, password, mobile phone number and etc cannot have a constant pattern. In addition, there was no study about card terminal. Therefore, this new study is meaningful. We collected vibration signals on card terminal with a small wireless sensor and analyzed signal data with statistical signal processing techniques using spectrum of frequency domain and principal component analysis and pattern recognition algorithms. Finally, we evaluated the performances by using real data from the sensor.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.16-26
• /
• 2016

This proposed project is about a bicycle anti theft devised system which helps people protect the bicycle from theft and helps to track the stolen bicycle's location using a smart phone. Safety bike uses two main devices to keep the bicycle secured, the vibration sensor and GPS sensor. The purpose of this project is to put all these small devices into one well connected system which will help the bicycle owner have more control over the security of his own bicycle. The whole system can be divided into two main parts. The first part is about the hardware development whereby all electronics components are connected via the circuit design using wire wrapping technique. This hardware part includes, a vibrations sensor, a GPS receiver, a toggle switch, LED light, Bluetooth and a buzzer. Wireless Bluetooth signals are used as the means of communication between the smartphone and the microcontroller. The second part is the software part which is being to program and control the whole system. The program is written using MikroBasic, a full-featured Basic compiler for microcontroller based systems. In conclusion, this system is designed to enable user to have control in securing his/her bicycle also being able to find and locate it at any time using GPS receiver and mobile android application.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.418-424
• /
• 2017

Magnesium has a higher specific strength than other metals and is widely used industry wide due to its excellent vibration absorption ability and electromagnetic wave shielding property.For example, it is used for automobile parts such as car seat frames and cylinder heads, and is widely used in electronic products such as notebook cases and mobile phone cases. In addition, it is in the spotlight as a bone-implant material used to assist in the treatment of damaged bones when the bones are cracked or broken. Currently, Ti alloy, stainless steel and Co-Cr-Mo alloy are used as the implant material, and the Mg alloy remains in research stage. The current problem with bone implant implants is that the patients must undergo reoperation to remove the implants after joint surgery. Magnesium, however, can achieve sufficient strength compared to current materials. In addition, since it is self-decomposed after the recovery, reoperation is not necessary. In this paper, Mg alloys were designed by adding harmless Ca and Zn to the human body. In order to improve the strength and corrosion resistance, the final alloy was designed by adding a small amount of Sr as a grain refiner. The radioactive elements of Sr are harmful to the human body, but other naturally occurring Sr elements are harmless. Microstructure analysis of the alloys was performed by optical microscopy and scanning electron microscopy. The mechanical properties and corrosion characteristics were evaluated by tensile test, potentiodynamic test and immersion test.