• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.11
• /
• pp.48-55
• /
• 2016

Ambient-light sensor system, which changes the brightness of a display as ambient light change, was studied to reduce the power consumption of the mobile applications such as note PC, tablet PC and smart phone. The ambient-light sensor system should be integrated on a display panel to improve the complexity and cost of mobile applications, so the ambient-light sensor and readout circuit was integrated on a display panel using low-temperature poly-silicon thin film transistors (LTPS-TFT). We proposed the new compensation method to correct the panel-to-panel variation of the ambient-light sensors, without additional equipment. We designed and investigated the new readout circuit with the proposed compensation method and the analog-to-digital converter for the final digital output of ambient light. The readout circuit has very simple structure and control timing to be integrated with LTPS-TFT, and the input luminance ranges from 10 to 10,000 lux. The readout rate is 100 Hz, and maximum differential non-uniformity with 20 levels of the final output below 0.5 LSB.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.72-76
• /
• 2023

The mobile card system used for mobile access control is connected to the door lock mounted on the door, enabling non-contact control. The RSSI (Received Signal Strength Indicator) of the BLE (Bluetooth Low Energy) communication packet used here can help to know the direction and distance of the mobile device. In this study, the desirable access control distance was calculated and implemented by setting the RSSI of the transmitter of the BLE packet used in mobile access control and processing the RSSI of the receiver.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1629-1631
• /
• 2007

Significant process in the performance and commercialization of full-color thin-film electroluminescent(EL) displays has been achieved. This is due to the remarkable progress made in the performance of exiting EL phosphors, development of new phosphor materials, and design of new EL phosphor structures. In this paper, we fabricated thinfilm EL devices with ZnS buffer and $BaTiO_3$ electric layer with on top and bottom of phosphor layer. The effect of ZnS and $BaTiO_3$ layer on the luminance of EL device were studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.972-974
• /
• 2009

This paper presents smart regional contrast enhancement technique of partitioned image for local dimming backlight on small-sized mobile display to reach two goals. One is to save the power consumption, and the other to improve contrast ratio of display image. Recently new advanced method is proposed, named local dimming method, that backlight LED is positioned on backside of the display panel. So it is important to partition an image by sub blocks and then post-processing independantly. This means regional contrast enhancement. After partitioning, we compare the mean luminance(Y) value of each sub-block image with the one of original whole image. If some blocks have the mean value lower than the one of whole image, they are processed with the proposed method and others are bypassed. Simultaneously the information of the processed blocks are transferred to BLC(Backlight LED Controller). And then the supply current of each backlight LED is reduced to realize the contrast ratio enhancement and at the same time to power consumption reduction. In addition, we verify this proposed method is free from blocking artifacts.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.563-569
• /
• 2011

Objective: This study focuses on the effects of pre-cues informing the location of upcoming visual stimulus on finger movement response in the context of control-on-display interfaces. Background: Previous research on pre-cues focus on attention allocation and motion studies were limited to indirect control conditions. The design of this study aimed to collect data on the exact landing point for finger-tap responses to a given visual stimulus. Method: Controlled visual stimuli and tasks were presented on a UI evaluation system built using mobile web standards; response accuracy and response time were measured and collected as appropriate. Among the 16 recruited participants, 11 completed the experiment. Results: Providing pre-cue on the location of stimulus affected response time and response accuracy. The response bias, which is a distance from the center of stimulus to the finger-tap location, was larger when the pre-cue was given during a one-handed operation. Conclusion: Given a pre-cue, response time decreases, but with accuracy penalized. Application: In designing touch-screen UI's - more strictly, visual components also acting as controllers - designers would do well to balance human perceptual and cognitive characteristics strategically.

• Design & Manufacturing
• /
• v.9 no.2
• /
• pp.1-5
• /
• 2015

Recently, as small-sized display products such as mobile phones and digital cameras have become lighter and smaller, the size of electric signal delivery part, connector for the mobile display products, also, needs to become smaller, so high-density integration like shortening the distance between signal delivery media, conductors is necessary. With the micro and high-density integration of the connector, it is necessary to maintain contact to a certain degree for keeping intensity and delivering electric signal smoothly to prevent a defect with a specific impact. Accordingly, this study carried out a structural analysis according to the operating mechanisms of 0.16CHP Class Bottom Contact FPC Connector and 0.24CHP Class BTB Connector mostly used in small-sized mobile display products such as mobile phones and digital cameras. As a result of the analysis, both connectors had lower than 997MPa, yield strength of connector material C5240-XSH, so it is judged that permanent plastic deformation would not occur, and that a contact force between the connector and FPC film occurs to a certain degree, so that there would not be any defect in electric signal delivery.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.697-702
• /
• 2008

Mobile display panel is small so that users are often difficult to perceive images clearly. About image we perceive much through colors and therefore we propose color fitting approach for clear perception even on the small and low quality LCD panels. Various color modifications have been studied and used in commercial software packages. For mobile usage, our approach instantly enhances color images by modifying colors in a way to contrast differences of them. The method includes tone enhancements (which contrast dark and bright sides) and color enhancements (which reduce saturation for pure colorants). Based on color theory, our method also modifies color values towards specified complementary and preference colors. We term this color fitting. This approach enables displaying photos, multimedia messages, videos and digital media broadcasting (DMB) for better perception in real-time on mobile devices. Index Terms.) color fitting, visualization on small display, mobile graphics, visual perception.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.609-613
• /
• 2005

Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. In this paper we will outline our progress towards developing such a low power consumption active-matrix flexible OLED ($FOLED^{TM}$) display. Our work in this area is focused on three critical enabling technologies. The first is the development of a high efficiency long-lived phosphorescent OLED ($PHOLED{TM}$) device technology, which has now proven itself to be capable of meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active matrix backplanes, and for this our team are employing poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing. We also present progress in operational lifetime of encapsulated T-PHOLED pixels on planarized metal foil and discuss PHOLED encapsulation strategy.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.12
• /
• pp.1209-1213
• /
• 2010

This paper presents a technique for an Android mobile device to best utilize its surrounding external display device such as high-definition TV, in order to overcome the size and resolution limitation of the small LCD in the mobile device. Unlike current techniques that simply expand the LCD screen image to an external large display, our technique dynamically changes the resolution adapting to capability of the external display. And, the original screen become a remote controller.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1085-1094
• /
• 2016

In this work, we present interactive automultiscopic content with mobile surface haptics for multimodal interaction. Our system consists of a 40-view automultiscopic display and a tablet supporting surface haptics in an immersive room. Animated graphics are projected onto the walls of the room. The 40-view automultiscopic display is placed at the center of the front wall. The haptic tablet is installed at the mobile station to enable the user to interact with the tablet. The 40-view real-time rendering and multiplexing technology is applied by establishing virtual cameras in the convergence layout. Surface haptics rendering is synchronized with three-dimensional (3D) objects on the display for real-time haptic interaction. We conduct an experiment to evaluate user experiences of the proposed system. The results demonstrate that the system's multimodal interaction provides positive user experiences of immersion, control, user interface intuitiveness, and 3D effects.