• 한국IT서비스학회지
• /
• 제7권2호
• /
• pp.181-195
• /
• 2008

The rapid growth of mobile communication technology has provided the expansion of mobile internet services, particularly mobile realtime transaction takes much weight among mobile fields. There is an increasing demand for various mobile applications to process transactions in a mobile computing fields. Thus, During transmission in wireless networks a base station failure inevitably causes data loss of the base station buffer. It is required to compensate the loss for communication. The existing methods for a base station failure are not adequate because they all suffer from too much overhead and resolve only the link failure. In this paper, we study an efficient recovry systems for a mobile DBMS. We propose SLL (Segment Log List) that enables the mobile host to compensate data loss efficiently in the case of base station failure. In SLL, a base station deliveries an output information of data cells to a mobile host. when a base station fails, the mobile host can retransmit just next data cells. We also prove the efficiency of new method.

• 한국통신학회논문지
• /
• 제35권4A호
• /
• pp.341-349
• /
• 2010

본 논문은 차세대 이동통신 기술로 주목받고 있는 IEEE 802.16 기반의 Mobile WiMAX (또는 WiBro) 시스템에서 여러 가지 채널환경조건 및 기지국의 조건을 고려하여 기지국의 출력파워를 최적으로 설계하는 방법에 관한 것이다. 본 논문에서는 다양한 환경조건에서 Mobile WiMAX 시스템의 상/하향 링크버짓(link budget)을 산출하여, 이로부터 Mobile WiMAX 기지국의 최적 출력파워를 도출하는 방법에 대해 정리하였다. 본 논문에서는 MIMO(multiple input multiple output) 기술이 적용된 기존의 2Tx-2Rx 기지국과 여기에 수신단의 감도를 높이기 위해 수신단의 안테나 개수를 4개로 늘린 2Tx-4Rx 기지국과 성능을 향상시키기 위해 새롭게 빔포밍(beamforming) 기술이 적용된 4Tx-4Rx 기지국의 경우 등 총 세 가지 경우에 대하여 최적 출력파워를 도출하였다.

• 정보처리학회논문지C
• /
• 제8C권6호
• /
• pp.815-820
• /
• 2001

본 논문은 단말의 이동성을 수용하기 위한 분산 이동 구조에 대하여 다루고 있다. 제안된 구조에서는 세가지 분산 객체에 대하여 소개하고 있는데, 무선 이동 사용자가 이용하는 이동 단말(MS：Mobile Station), 유선망에서 이동 단말을 논리적으로 대신하는 이동 에이전트(MA：Mobile Agent), 이동 단말에 서비스를 제공하는 유선용 응용 서버(AS：Application Server)를 이동 환경에서 수용하기 위한 추적 에이전트(TA：Trace Agent)가 그들이다. 이동 에이전트는 이동 단말과 밀접한 관련을 갖고, 추적 에이전트는 응용 서버와 밀접한 관련을 갖는다. 핸드오프 과정에서 패킷 손실이나 순서 변경과 같은 문제점을 처리하기 위한 흐름 제어 기법이 고려되었으며, 제시된 알고리즘을 사용하는 경우의 추가적인 지연 시간에 대한 산술적인 결과를 제시하고 있다. 시뮬레이션을 통하여 알고리즘의 검증과 함께 산술적인 결과와 동일한 지연 시간을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(1)
• /
• pp.297-300
• /
• 2004

In cellular communication, subscriber authentication is an essential technique. The mobile station should operate in conjunction with the base station to authenticate the identity. In CDMA system, authentication is the process by which information is exchanged between a mobile station and base station for the purpose of confirming the mobile station. A successful authentication process means that the mobile station and base station process identical sets of shared secret data(SSD). SSD can be generated by authentication algorithms. The cryptographic hash function is a practical way of authentication algorithms. In this paper, we propose and implement MD5 and SHA-1 with modified structure.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제5권5호
• /
• pp.103-108
• /
• 2016

본 논문에서는 멀티 홉 릴레이 네트워크에서 기지국(base station), 중계국(relay station)과 각 단말(mobile station)간의 전송률(throughput)을 향상시킬 수 있는 자원 할당 방법과 간섭을 겪는 단말들의 간섭을 최소화하여 모든 단말의 전송률을 보장하는 방법을 제안하고 있다. 멀티 홉 릴레이 시스템에서 기지국과 릴레이가 주파수 자원을 공유할 수 있으므로 간섭에 취약한 단말들이 생길 수 있다. 본 논문에서는 각 단말의 신호대 잡음 간섭 비(signal to interference plus noise ratio)를 이용하여 엑세스 영역(access zone)과 릴레이 영역(relay zone)의 경계를 동적으로 조절하는 기법과 함께 간섭에 취약한 단말을 분류하고 이를 관리하는 기법을 제안한다. 성능 평가를 통해 제안하는 기법이 무선자원 사용의 효율성을 향상하고 각 단말들의 공평성을 보장하며 네트워크 전체 성능을 향상시키는 것을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.65-68
• /
• 2000

In this paper, design parameters are investigated and design procedure is established for PCS mobile station, especially for receiver RF block. And simulation environment to analyze parameters of the receiver RF block to determine whether it satisfies the receiver standard, IS-98C, is calculated. Design parameters are simulated and optimized. With simulated results, PCS mobile station is implemented and tested. Measured results show good agreement with simulation Design procedure can be used to get optimum characteristics for each of receiver block. By using optimum characteristics, mobile station can be designed more efficiently.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.121-124
• /
• 1999

In a packet-switched wireless cellular network, a packet destined to a mobile station is queued at a base station and then broadcast over the base station's cell. When an active mobile station leaves a cell, there re-main packets which are destined to the mobile and not yet delivered to it at the cell's base station. For application which are sensitive to packet losses, such back- logged packets must be forwarded to the new base station. Otherwise, an end-to-end retransmission may be required. However, an increase in packet delay is incurred by employing the packet forward scheme, since a packet may be forwarded many times before it is delivered to the destined mobile station. For an enhanced quality-of-service level, it is preferred to reduce tile packet delay time. In this paper, we develop an analytical approximation method for deriving mean packet delay times. Using the approximation and simulation methods, we investigate the effect of network parameters on the packet delay time.

• ETRI Journal
• /
• 제19권3호
• /
• pp.141-168
• /
• 1997

The base station (BS) in the CDMA Mobile System (CMS) connects calls through the radio interface and is designed to provide mobile subscribers with high quality service in spite of mobile subscribers motions. The BS consists of multiple base station transceiver subsystems (BTSs), a base station controller (BSC) and a base station manager (BSM). This paper is concerned with the BSC and the BSM. The BSC is located between the BTSs and the mobile switching center (MSC) connected with the public network, and to mobile subscribers via the BTSs. The BSM provides operator-interfaces per the BS and takes responsibility of operation and maintenance (OAM) of the BS. Design of the BSC is based on two module types: functional module and unit module. The functional module is used to support new services easily and the unit module to increase the system capacity economically. Both modular types are easily achieved by inserting the corresponding modules to the system. Particularly, in order to efficiently support the soft handover which is one of CDMA superior advantages, the BSC adopts a large high-speed Packet switch connecting up to 512 BTSs, and thus mobile subscribers can be provided with soft handover in high probability. The BSM is based on a commercial workstation to support OAM functions efficiently and guarantee high reliability of the functions. The BSM uses graphical user interface (GUI) for efficient OAM functions of the BS.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.94.4-94
• /
• 2001

An acoustic ranging system was applied for reckoning the location of an agricultural vehicle in the field. The system has a number of fixed stations and a mobile station such as an agricultural vehicle. The mobile station comprises a radio frequency modulator-demodulator (RF MODEM), a buzzer, and a personal computer. The fixed station comprises an (RF MODEM), a microphone, an amplifier for the microphone, and a personal computer with a soundboard. The mobile station transmits a 7-bit ASCII code and, activates the buzzer simultaneously. The propagation delay time at the fixed station is caused by the difference ...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2093-2095
• /
• 2002

Nowadays, there are actually lots of changes in wireless communications of Korea. But it is not an exact PTP(Peer to Peer) Communication. In other words, a mobile station which can find fixed station can be connected with wireless internet server or other services, oppositely fixed station cannot approach to mobile station. Even though it exists, it is difficult to communicate with full duplex. We can service using CDMA 1X techniques such as cellular based SMS (Short Message Service) service or very simple MPRG Services. In this paper, we propose a system, using DirectX based mobile/fixed station stand alone program, depending on bandwidth of wireless service provider, tranceiving high resolution moving picture or reliable data regularly by a fixed connection each other.